HummingBoard Gate Boards Add a mikroBUS Socket to Support MikroElektronika Click Boards

SolidRun already released HummingBoard-Base, HummingBoard-Pro, and HummingBoard Edge previously, but the company has now launched another version of their Freescale i.MX6 based boards with HummingBoard Gate that adds a mikroBUS socket to support over 150 add-on boards – called Click Boards – made by MikroElektronika. HummingBoard Gate specifications: SoC – Freescale i.MX6 Solo, Dual Lite, Dual, or Quad with Cortex-A9 cores @ 1 to 1.2 GHz System Memory – Up to 4GB DDR3 Storage – Micro SD slot Connectivity – Gigabit Ethernet (limited to 470Mbps), optional WiFi/Bt module Video Output – HDMI output, MIPI-DSI connector Camera – MIPI CSI-4, parallel camera USB – 4x USB 2.0 ports Expansion mPCIe slot with SIM card holder 36-pin GPIO header mikroBUS click interface Misc – Reset button, RTC with battery Power – 7-36V, 5.5mm jack Dimensions – 102 x 69 mm As usual, the board is comprised of a baseboard and a microSOM, […]

Allo SPARKY Board Supports Raspberry Pi HATs for Multimedia, IoT and VoIP Applications

Allo is a company based in Bangalore, India specializing in VoIP hardware solutions, but they’ve recently developed a single board board powered by Actions Semi S500 quad core processor that supports various Raspberry Pi HATs and can be used for multimedia, IoT, and Telecom application such as Asterix or Freeswitch PBX. Allo SPARKY board specifications: SoC – Actions Semi S500 quad core Cortex A9r4 processor with PowerVR SGX544 GPU @ 500 MHz Memory – 1 or 2GB RAM Storage – Socket for 8, 16, 32 or 64GB pluggable eMMC modules,  micro SD slot up to 32GB, optional NAND flash Video Output – HDMI,  34-pin LCD connector Audio – HDMI, Headphone jack, built-in microphone Video Codec – H.265 (HEVC) and Ultra HD (4K*2K) video playback. Encoding up to 1080p@60fps. Connectivity – 10/100M Ethernet USB – 2x USB 2.0 host ports, 1x USB 3.0 (OTG) port Camera –  24-pin camera interface (Up […]

MOI Pro AMD IPTV Streaming Server Supports Up to 16 Tuners

TBS Technologies is a company specializing in digital TV tuners, with their catalog includes various DVB-T2, DVB-C, DVB-S2 and ATSC tuner cards. They also happen to be the designer of Matrix board and Matrix 2 Android set-top box, both of which run Android or Linux and support some of the company’s tuners. But they also have higher end products such as MOI Pro AMD IPTV streamer based on an AMD Embedded G-Series processor, and supporting up to 4 tuner cards with up to 4 tuners each. TBS MOI Pro AMD specifications: SoC – AMD GX-412HC quad core processor @ 1.2GHz with AMD Radeon HD GPU @ 300MHz (7W TDP) System Memory – 4GB DDR3-1333 Storage – 30GB mSATA SSD, 1x SATA @ 6.0Gb/s, Video Output – 1x HDMI, 1x VGA (reserved connection?) Connectivity – 2x Gigabit Ethernet Tuners – Up to 4 PCIe TV tuner cards (DVB-S2 or DVB-T2/T/C) for […]

WeTek Core Android 5.1 TV Box to Support Netflix in HD, OpenELEC, Lubuntu and More

Last year, WeTek launched WeTek Play Android TV receiver with DVB-T2, DVB-S2 or ATSC tuners, and in my review of the DVB-S2 version I found out it was a rather capable device despite the low hardware specifications. The company is about to launch WeTek Core, a media player powered by Amlogic S812-H processor, running Android 5.1.1, as well as supporting Netflix up to 1080p. something most other Android media players can’t handle. WeTek Core preliminary specifications: SoC – Amlogic S812-H quad core processor @ 2.0GHz with an Octa-core Mali-450MP gpu System Memory – 2GB DDR3 Storage – 8GB NAND flash, micro SD slot Video Output – HDMI 1.4 up to 4K @ 30Hz + AV Audio Output – HDMI, AV, and optical S/PDIF Connectivity – Gigabit Ethernet, 802.11 b/g/n & 802.11ac (TBC), and Bluetooth 4.0 USB – 2x USB 2.0 host ports Misc – Power button and LED Power Supply […]

WeTek OpenELEC Box Comes with DVB or ATSC Tuners for $91

WeTek Play TV boxes are Android set-top boxes with DVB-T2/C2, DVB-S2, or ATSC tuner powered by Amlogic AML8726-MX dual core Cortex A9 processor. Even though the hardware is not the greatest right now, I found that it did a pretty good job with video playback and digital TV playback and recording in my review of the DVB-S2 version. The company also provided various images including one using OpenELEC, a Linux based distribution running Kodi only. But now, if you’d rather have OpenELEC pre-installed in the box, instead other Android, WeTek made an OpenELEC box based on the same hardware platform selling for $90.55 on OpenELEC website. OpenELEC box has mostly the same hardware specifications as WeTek Play: SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with Mali-400MP GPU System Memory – 1GB DDR3 Storage – 4 GB NAND flash + 1x micro SD slot Video Output – HDMI, […]

$170 Solidrun Cubox-i 4×4 Freescale i.MX6 Mini PC Boasts 4GB RAM, an eSATA Port

Most ARM based mini PCs come with 1 or 2GB RAM, with few exceptions like Nagrace HPH NT-V6 or Tronsmart Draco AW80 Telos featuring 4GB RAM,  but they are mostly optimized for Android, and although they can also run Linux desktop distributions there are often caveats with lack of hardware video decoding for example. Solidrun has now added a new model to its Cubox-I mini PC family with Cubox-I 4×4 powered by Freescale i.MX6 quad core processor coupled with 4GB RAM, and it’s also one of the few mini PCs coming with an eSATA port. SolidRun CuBox-i 4×4 specifications SoC –  Freescale i.MX6 Quad 4x Cortex A9 @1GHz-1.2GHz with Vivante GC2000 (OpenGL/ES 2.0) System Memory – 4GB 64-bit DDR3 @ 1066 MHz Storage – microSD card slot, eSATA II (3 Gbps) connector Video Output – HDMI 1.4 with 3D support Audio Output – HDMi, optical S/PDIF Connectivity – Gigabit Ethernet […]

Onkyo TX-NR636 AV Receiver Setup and Audio Pass-through with OpenELEC / Kodi

Following up on my LG 42U820T 4K TV review,  I’ll know checkout the second item purchased for my reviews thanks to the help of my readers, with Onkyo TX-NR636 7.2 channel AV receiver combined with Pioneer S-11 speaker set. As this is my first AV receiver, I still have a lot to learn, I can’t really comment on audio quality (except it sounds much better than my TV speakers, and is more powerful), so I won’t do a full review, but I’ll show some details about the receiver, explain how to it setup with speakers, show how to setup OpenELEC / Kodi for HDMI audio pass-through, and test it with various Dolby and DTS video files. Onkyo TX-NR636 Specifications But before all that, I’ll list some of the specifications of this cool AV receiver. Amplified Rated Output Power: 95 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven […]

Raspberry Pi 2 / ODROID C1+ Development Boards Comparison

Raspberry Pi 2 Model B board has just been released, and although it’s not a direct answer to ODROID-C1, as Broadcom started the design for BCM2836 SoC for RPI2 a long time ago, both low cost development boards have similar specifications, with a quad core processor, 1GB RAM, Ethernet, and four USB ports, as well as the exact same price: $35. So I’ve decided to compare both in details to find out the actual differences, and which one may be more suitable to a particular application. Let’s get straight to the comparison table. [Updated on November 24 to use ODROID C1+ instead of ODROID C1] Hardkernel ODROID C1+ Raspberry Pi 2 Model B Comment Processor Amlogic S805 quad core Cortex A5 @ 1.5 GHz (Overclockable to 1.7 GHz or more) Broadcom BCM2836 quad core Cortex A7 @ 900 MHz (Overclockable to 1.1GHz or more) Despite the architecture advantage for Cortex […]

Exit mobile version