Single Board Computer News - Page 35 of 87 - CNX Software

December 16, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UP Squared 6000 – AAEON introduces Elkhart Lake SBC and Edge computer

AAEON has unveiled a new single board computer and edge system from the “UP bridge the gap” family with UP Squared 6000 equipped with Intel Atom x6000, Celeron, or Pentium Elkhart Lake processor, up to 8GB DDR4, 64GB eMMC flash, two Gigabit Ethernet ports, DisplayPort 1.2, HDMI 2.0b, eDP video interfaces, SATA and M.2 storage, and more. The UP Squared 6000 is available in four different SKUs with notably an industrial SKU powered by the Intel Atom x6425RE optimized for automation, robotics, and industrial applications with support for Intel Time Coordinated Computing (TCC), Time-Sensitive Networking (TSN) via its 2.5GbE port. UP Squared 6000 specifications: Elkhart Lake SoC (one of the other) Intel Celeron N6210 dual-core processor @ 1.2 GHz / 2.6 GHz with 16EU Intel UHD graphics; 6.5W TDP Intel Pentium J6426 quad-core processor @ 1.8GHz / 3GHz with 32EU Intel UHD Graphics; 10W TDP Intel Atom x6413E quad-core processor […]

December 14, 2021May 30, 2022 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

Raspberry Pi 4 gets Armbian test images, DietPi 7.9 released

Ubuntu and Debian images built by Armbian got popular because of the sad state of affairs of most single board computers. But since Raspberry Pi boards are rather well-supported by the Raspberry Pi Foundation and community, plus part of it is closed-source, there’s been little motivation by the Armbian community to work on it, and that means there’s no official support for Raspberry Pi. But some Armbian test images have just been released for Raspberry Pi 4, specifically Ubuntu 22.04 “Jammy Jellyfish” images with a CLI (headless) version, and two desktop variants with Cinnamon and XFCE desktop environments which you can download on their server(s). Separately, DietPi 7.9 lightweight Linux distribution based on Debian has also been released with various improvements. The good news about Armbian images for Raspberry Pi is that they exist, but the less good news is that those are still “test images”, and the popular board […]

December 9, 2021December 5, 2021 by Sponsored Post - 12 Comments

StarFive VisionFive single board computer officially for sale, accelerating RISC-V ecosystem development (Sponsored)

San Francisco, U.S. – Dec. 8, 2021- at RISC-V Summit 2021, StarFive Technology Co., Ltd. (hereinafter “StarFive”), the leader of RISC-V software and hardware ecosystem in China, announced that “VisionFive” single-board computer is officially for sale. The availability of VisionFive signifies a breakthrough in RISC-V hardware for high-end applications to help accelerate the innovations of the global RISC-V industry and promote the improvement and development of the open-source software ecosystem to drive the realization of more innovative top-layer RISC-V applications. VisionFive open-source hardware enables a new level of innovation for the RISC-V ecosystem VisionFive, the first generation of cost-effective RISC-V single-board computer is designed to run Linux, with StarFive’s JH7100 vision processing SoC. The JH7100 SoC is equipped with a 64-bit high-performance RISC-V dual-core processor with a 2MB L2 cache, running at 1.5GHz, which is excellent for high-performance computing. The JH7100 SoC is further equipped with the deep learning processing […]

November 27, 2021May 27, 2022 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

VisionFive V1 RISC-V Linux SBC resurrects BeagleV StarFive single board computer

Last summer we reported that BeagleV StarFive RISC-V SBC would not be manufactured, but all was not lost as StarFive would collaborate with Radxa to make a new single board computer based on their JH7100 dual-core 64-bit RISC-V processor. But thanks to a report on Heise and extra photos acquired by CNX Software, we now have more details about the board that mostly comes with the same features as the BeagleV StarFive, but a completely different layout that brings all the main ports to one side of the board. VisionFive V1 specifications: SoC – StarFive JH7100 Vision SoC with: Dual-core Sifive U74 RISC-V processor @ 1.5 GHz with 2MB L2 cache Vision DSP Tensilica-VP6 for computing vision NVDLA Engine 1 core (configuration 2048 MACs @ 800MHz – 3.5 TOPS) Neural Network Engine (1024MACs @ 500MHz – 1 TOPS) VPU – H.264/H.265 decoder up to 4Kp60, dual-stream decoding up to 4Kp30 […]

November 24, 2021November 26, 2021 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Sipeed LicheeRV – A $16.90 Allwinner D1 Linux RISC-V board

Finally! There’s now a much more affordable Allwinner D1 RISC-V Linux board thanks to Sipeed LicheeRV Nezha CM SBC sold for $16.90 and up on Aliexpress, that’s much cheaper than the $100 asked for Nezha SBC, although still not incredibly cheap as we’ll see from the specifications below. Sipeed LicheeRV is actually both a board and a system-on-on-module with an edge connector, and is equipped with 512MB DDR3, a USB-C OTG port, a MicroSD card socket, and an SPI display interface. The dual M.2 edge connector can be plugged into a carrier board, and they will be a “86 Box” (86x86mm) for HMI display that can be used for home automation. Sipeed Lichee RV specifications: SoC – Allwinner D1 single-core XuanTie C906 64-bit RISC-V processor @ 1.0 GHz with HiFi4 DSP, G2D 2D graphics accelerators Memory – 512MB DDR3 memory @ 792 MHz Storage – MicroSD card slot Video – […]

November 22, 2021January 24, 2022 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

International Black Friday 2021 Deals

We’ve been listing Black Friday and Cyber Monday deals available internationally since 2014, going beyond the US-centric Amazon Black Friday deals for instance. So let’s do it again this year from the usual suspects like Aliexpress and Banggood, as well as direct deals from manufacturers. Arduino Black November The maker board manufacturer offers discounts on eight products until November 29, namely the Arduino Starter Kit, the Arduino UNO board, the Arduino Nano Arduino Micro, Oplà IoT Kit, Arduino Due, Portenta H7 machine vision bundle, and the Arduino Mega. The company also offers discounts on Arduino-branded gears from T-Shirts to pens. Khadas 20% discount Khadas has an upcoming deal on the Amazon US store that will run for only 24 hours from 25th November 12:00 am to 26th November 11:59 pm (Pacific Standard Time). As I understand it, they ship internationally too, and you’ll be able to get 20% off the […]

November 17, 2021July 16, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Orange Pi R1 Plus LTS is a cheaper dual GbE SBC with YT8531C Ethernet transceiver

Rockchip RK3328 dual GbE SBC YT8531C PHY

It’s been a while since Shenzhen Xunlong Software released a new Orange Pi board. But the wait is over… sort of, as Orange Pi R1 Plus LTS is a low-cost version of Orange Pi R1 Plus SBC that replaced the Realtek RTL8211E PHY with a YT8531C Ethernet PHY that offers the exact same features but at a lower price. That means the new single board computer is still designed for headless operation, for example a router or firewall, with a Rockchip RK3328 processor, 1GB RAM, dual Gigabit Ethernet, and a USB 2.0 port. Orange Pi R1 Plus LTS specifications: SoC – Rockchip RK3328 quad-core Cortex-A53 @ 1.5 GHz with Arm Mali-450MP2 System Memory – 1GB LPDDR3 RAM Storage – MicroSD card slot, 16 MB SPI flash Connectivity – 2x Gigabit Ethernet via YT8531C Ethernet PHY and RTL8153B USB 3.0 to Ethernet chip USB – 1x USB 2.0 port, 1x USB-C OTG […]

November 11, 2021March 27, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Amlogic T972 multimedia networking SBC supports 4K V-by-One displays

We’ve seen plenty of Amlogic S-series TV boxes and SBCs over the years, but Amlogic also manufacturer T-series SoCs designed for televisions. Since there are relatively few TV manufacturers compared to TV boxes or board manufacturers we seldom read about those. But a few years ago, we noticed a TV box based on Amlogic T962E quad-core Cortex-A53 processor offering both HDMI input and output ports, and now Shenzhen Tomao just informed me they were offering an Amlogic T972 multimedia network SBC for digital signage applications with multiple HDMI inputs and a V-By-One display interface with support for up to 4K resolutions. Amlogic T972 SBC specifications: SoC – Amlogic T972 (or T962X2) quad-core Arm Cortex-A55 processor @ 1.98 GHz with Arm Mali-G31 MP2  GPU with support for OpenGL ES 3.2, Vulkan 1.1 and OpenCL 2.0 System memory – 2GB or 4GB DDR4 Storage – 16GB eMMC flash, MicroSD card socket Display […]