Single Board Computer News - Page 37 of 87 - CNX Software

November 1, 2021November 1, 2021 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Raspberry Pi Zero 2 W vs Radxa Zero – Features and benchmarks comparison

The just-announced Raspberry Pi Zero 2 W is not the first quad-core Arm SBC following Raspberry Pi Zero form factor, and back in 2017, the Banana Pi BPI-M2 Zero was introduced for $15, and the Radxa Zero was unveiled last June with an Amlogic S905Y2 SoC with price starting at $15 as well. With its Allwinner H2+ quad-core Cortex-A7 processor clocked at 1 GHz and a price bumped up to $23, the Banana Pi M2 Zero has mostly become irrelevant, but the Radxa Zero may still be considered by some people with a 1.8 GHz processor, and options for up to 4GB RAM, so let’s see how features compare against Raspberry Pi Zero 2 W, followed by some benchmark numbers. Raspberry Pi Zero 2 W vs Raxda Zero – Features If we just look at the comparison table, the Radxa Zero is equivalent or superior in almost every way, except […]

November 1, 2021November 3, 2021 by Jean-Luc Aufranc (CNXSoft) - 295 Comments

Giveaway Week – NanoPi R2S gateway

Here’s the 8th edition of CNX Software giveaway week! I’ll have seven items to give away to readers in the 2021 event with some help from two companies as I was short on available samples this year. We’ll start with NanoPi R2S gateway based on Rockchip RK3328 SoC, and equipped with 1 GB DDR4 RAM as well as two Gigabit Ethernet ports. I reviewed NanoPi R2S gateway at the end of last year with Armbian built Ubuntu 20.04 Focal, and it performed well under load thanks to the metal enclosure and optimized OS. The main downside is having a USB 2.0 port, especially if you intend to use it as external storage, but that’s the cost of having two Gigabit Ethernet ports on Rockchip RK3328 SoC, with one of those using the USB 3.0 interface. The giveaway includes the board and metal enclosure. It is already fully assembled. So you’ll […]

October 30, 2021December 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Build an open source-hardware Allwinner D1s RISC-V Linux SBC for under $10

We covered Allwinner D1s RISC-V processor with 64MB built-in RAM a few days ago, and we’ve just found out about Xassette-Asterisk, an open-source hardware board based on the processor that runs Linux (OpenWrt) and is said to cost less than $10 to make. This is significantly cheaper than the Allwinner D1 based Nezha RISC-V Linux SBC currently sold for a little over $100, a rather poor value. The cheaper board will not quite have the same applications with just 64 MB RAM and no HDMI, but it could be great for projects requiring a camera and/or a display, audio interfaces, plus some I/Os. Xassette-Asterisk specifications: SoC – Allwinner D1s single-core 64-bit RISC-V processor @ 1.008 GHz with 64MB DDR2 Storage – MicroSD card slot, 32 MBit SPI flash (W25Q32 – U2 on the board) Display I/F – 40-pin LCD connector, 6-pin touch panel interface, backlight power Camera I/F – 24-pin […]

October 28, 2021October 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Raspberry Pi Zero 2 W and Zero W features comparison

Rapsberry Pi Zero W vs Raspberry Pi Zero 2 W

The Raspberry Pi Zero 2 W quad-core board has just launched, and in this post, we’ll look at how the new board compares to the original Raspberry Pi Zero W SBC. From the photos above they are nearly identical, but looking at the detailed specifications, we’ll find some interesting differences. So the main reasons to get a Raspberry Pi Zero 2 W over a Raspberry Pi Zero W is the extra performance enabled by the quad-core Cortex-A53 processor and possibly better wireless performance. The downsides are at the new board costs $5 more, and power consumption might be higher, but this would have to be tested under various scenarios. Another reason you may end up getting the Zero 2 W board that is not shown in the specifications is the recent shortage of chips, so the new board may be more likely to be in stock at your local distributor. […]

October 28, 2021October 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 35 Comments

$15 Raspberry Pi Zero 2 W launched with quad-core CPU, 512MB RAM

Raspberry Pi Zero 2 W is the first quad-core SBC from the Raspberry Pi Foundation with the Raspberry Pi Zero form factor. Based on the RP3A0 system-in-package (SiP) comprised of a Broadcom BCM2710A1 quad-core Cortex-A53 processor and 512MB LPDDR2, the new Pi Zero W 2 board offers the exact same interfaces as its predecessor. This includes a MicroSD card socket, a mini HDMI port, two micro USB ports, a MIPI CSI-2 camera connector, as well as an unpopulated 40-pin GPIO header. The wireless module appears to have changed but still offers WiFi 4 and Bluetooth 4.x BLE, and it’s using the same VideoCore IV GPU to handle 3D graphics and video encoding and decoding up to 1080p30. Raspberry Pi Zero 2 W specifications: SiP – Raspberry Pi RP3A0 system-in-package with: SoC – Broadcom BCM2710A1 quad-core Arm Cortex-A53 @ 1GHz (overclockable to 1.2 GHz) with VideoCore IV CPU supporting OpenGL ES […]

October 21, 2021August 31, 2022 by Jean-Luc Aufranc (CNXSoft) - 61 Comments

Khadas VIM4 – An Amlogic A311D2 SBC with 8GB RAM, Wi-Fi 6, HDMI input & output

We’ve just written about the Amlogic A311D2 processor with some pretty interesting features, and Khadas VIM4 will be one of the first single board computers equipped with the latest octa-core processor, succeeding the company’s earlier Khadas VIM3 board powered by an Amlogic A311D hexa-core processor. Khadas VIM4 makes good use of the extra memory allowance with faster 8GB LPDDR4 RAM, and also offers 32GB eMMC flash, Gigabit Ethernet, WiFi 6, 4Kp60 HDMI input and output, independent USB 3.0, and PCIe (via M.2 socket) interfaces, and more. Khadas VIM4 specifications with bold highlights showing the differences with the VIM3 Pro model: SoC – Amlogic A311D2 octa-core processor with 4x Arm Cortex-A73 cores @ up to 2.2 GHz and 4x Cortex A53 cores @ up to 2.0 GHz, Arm Mali-G52 MP(8EE) GPU, NPU shown as TBD possibly due to license requirements System Memory- 8GB LPDDR4X @ 2112 MHz Storage – 32GB eMMC […]

October 20, 2021October 21, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Raspberry Pi 4 2GB gets a price hike to $45, 1GB version coming back for $35

We’ve been used to getting better hardware for cheaper or in the case of Raspberry Pi model B boards a stable $35 price tag since 2021 with gradual improvements to the hardware. Many companies already had to hike prices for their board due to supply constraints, and Raspberry Pi Trading has become the latest victim of the increase in components with the Raspberry Pi 4 with 2GB RAM going back to its original $45 price tag, and the re-introduction of the Raspberry Pi 4 1GB for $35. We are told this is temporary, and once everything settles the Raspberry Pi 4 2GB should sell for $35 as was the case since last year. This is the very first price hike in Raspberry Pi (short) history. The supply shortage is not as bad as it seems though, as Raspberry Pi Trading expects to sell around seven million units this year, or […]

October 16, 2021October 16, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Raspberry Pi 4, Rockchip RK3399 SBC’s get Arm SystemReady IR certification

RockPro64 RK3399 Arm SystemReady IR certification

The first hardware platforms getting Arm SystemReady IR certification for IoT Edge applications were announced a few months ago with namely NXP i.MX 8 Mini evaluation kit and Compulab IOT-GATE-IMX8 gateway being able to run off-the-shelf operating system images such as Fedora IoT, OpenSuSE Leap 15.3, and Debian 11 thanks to UEFI firmware. But following PinePhone Pro Linux smartphone announcement, and Pine64 October update, we also learned that Rockchip RK3399 based RockPro64 was also Arm SystemReady IR certified, and check Arm’s website directly revealed it was joined by Lenovo Leez P710 “Gateway” SBC, as well as Raspberry Pi 4 and Pi 400 platforms. Let’s check the details and see what off-the-shelf images each board has been tested with. Pine64 RockPro64 RK3399 SBC achieved SystemReady IR v1.0 Level 1 certification meaning it complies with some waivers and workarounds found in the errata document. The board has been successfully tested with Fedora […]