seeed studio News - Page 2 of 16 - CNX Software

August 23, 2023August 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

SenseCAP T1000 – A credit card-sized LoRaWAN GPS tracker based on Semtech LR1110 (Crowdfunding)

SenseCAP T1000 is an ultra-thin credit-card-sized GPS tracker with Semtech LR1110 wireless chip with LoRaWAN, WiFi (scanning), and GNSS connectivity, plus two built-in sensors to monitor temperature, light intensity, and motion. We’ve covered several LTE IoT and LoRaWAN GPS trackers in the past and even tested the RAK811 LoRa GPS Tracker board with our own gateway, but the SenseCAP T1000 is particularly attractive due to its slim design. It works both indoors and outdoors with IP65 waterproof protection, looks quite easy to set up with its button and LED, and also integrates an SOS feature that can be triggered with a long press. SenseCAP T1000 specifications: Wireless Semtech LoRa Edge LR1110 Asset Management Platform LoRa/(G)FSK Half-Duplex RF transceiver working in the 150 – 960MHz; compatible with LoRaWAN 1.0.4 standard GNSS (GPS/ BeiDou) low-power scanning 802.11b/g/n Wi-Fi ultra-low-power passive scanning Unnamed Bluetooth 5.1 LE chip for initial configuration and indoor positioning […]

June 7, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

reTerminal DM – A Raspberry Pi CM4-powered 10.1-inch HMI controller

reTerminal DM 10-inch Raspberry Pi CM4 HMI terminal

Seeed Studio’s reTerminal DM is an upgrade to the Raspberry Pi CM4-powered reTerminal with a larger 10.1-inch touchscreen display and a greater range of features and interfaces for various industrial applications. Described as a “Panel PC, HMI, PLC, IIoT Gateway all-in-one device”, the new reTerminal DM notably supports 12V-24V variable DC input and optionally PoE power input, its front panel is rated IP65 for protection against liquids and dust, a range of wired and wireless connectivity options are offered, and it also includes some serial and digital input and output interfaces. reTerminal DM specifications: SoM – Raspberry Pi Compute Module 4 with Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz, up to 8GB RAM, up to 32GB flash Storage – Optional M.2 NVMe SSD via M.2 2280 Key-M slot Display – 10.1-inch display with 1280 x 800 resolution, 10-point capacitive touchscreen 400-nit brightness, 170° H/V viewing angle Video Output – […]

May 27, 2023May 27, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

SenseCAP Indicator D1Pro Review – An ESP32-S3 & RP2040 IoT devkit with a 4-inch display, LoRa connectivity, sensors

The SenseCAP Indicator D1Pro is an IoT development kit based on ESP32-S3 WiFi & BLE chip, a Raspberry Pi RP2040 microcontroller, and offering LoRa connectivity through an SX1262 RF chip. It also features a 4-inch touchscreen display, two Grove interfaces with ADC & I2C, and two USB Type-C ports including one exposing GPIOs, and the D1Pro integrates tVOC and CO2 sensors, plus the kit ships with an external Grove AHT20 TH sensor for temperature and humidity measurements. SenseCAP Indicator D1Pro Features Dual MCUs and GPIO expansion with the Espressif ESP32-S3 and Raspberry Pi RP2040 microcontrollers and support for over 400 Grove-compatible modules. Real-time air quality monitoring thanks to the built-in tVOC and CO2 sensors, and an external Grove AHT20 TH sensor for more precise temperature and humidity readings. Local LoRa Hub for IoT Connectivity thanks to the integrated Semtech SX1262 LoRa chip for connecting LoRa devices to IoT platforms such […]

May 15, 2023May 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Seeed Studio launches Jetson-based “reComputer Industrial” fanless Edge AI computers

reComputer Industral fanless Jetson Orin computer

We covered the actively-cooled reComputer J4012 Edge AI mini PC powered by Jetson Orin NX system-on-module last January, but Seeed Studio has now launched four fanless “reComputer Industrial” variants with an aluminum case, two Gigabit Ethernet ports, three USB 3.2 ports, an RS232/RS422/RS485 serial port, and a terminal block with four DI, four DO, and a CAN Bus. The four different models simply use a different Jetson Xavier NX/Orin NX/Orin Nano module: reComputer Industrial J2011 – NVIDIA Jetson Xavier NX 8GB with a 6-core NVIDIA Carmel Armv8.2 64-bit CPU, 384-core NVIDIA Volta GPU with 48 Tensor Cores delivering up to 21 TOPS of AI performance, 8GB LPDDR4x, 16 GB eMMC flash reComputer Industrial J3011 – NVIDIA Jetson Orin Nano NX 8GB with a 6-core Arm Cortex-A78AE Armv8.2 64-bit CPU, 1024-core NVIDIA Ampere GPU with 32 Tensor Cores delivering up to 40 TOPS of AI performance, 8GB LPDDR5 reComputer Industrial J4011 […]

March 22, 2023March 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

XIAO ESP32S3 is a tiny ESP32-S3 WiFi 4 and BLE 5.0 module for IoT, AI, and robotics

Seeed Studio XIAO ESP32S3 is the new member of the company XIAO family with an ESP32-S3 dual-core wireless microcontroller with WiFi 4 and BLE 5.0 designed for Smart Home, IoT, wearables, and Robotics applications. It succeeds the single-core ESP32-C3-based XIAO ESP32C3 board with the same form factor, but the new XIAO ESP32S3 offers more performance, vector extension for machine learning, more flash, and improved power consumption in deep sleep mode. Seeed Studio XIAO ESP32C3 specifications: Wireless MCU – Espressif Systems ESP32-S3R8 dual-core Tensilica LX7 microcontroller @ 240 MHz with 512KB SRAM, 8MB PSRAM, Wi-Fi 4 & Bluetooth 5.0 dual-mode (Classic + BLE) connectivity Storage – 8MB SPI flash Antenna – External u.FL antenna USB – USB Type-C port for power and programming Expansion I/Os 2x 7-pin headers with 1x UART, 1x I2C, 1x SPI, 11x GPIO (PWM), 9x ADC 3.3V I/O voltage (not 5V tolerant) Debugging – JTAG pads Misc […]

January 10, 2023March 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

reComputer J4012 mini PC features NVIDIA Jetson Orin NX for AI Edge applications

reComputer J4012 is a mini PC or “Edge AI computer” based on the new NVIDIA Jetson Orin NX, a cost-down version of the Jetson AGX Orin, delivering up to 100 TOPS modern AI performance. The mini PC is based on the Jetson Orin NX 16GB, comes with a 128GB M.2 SSD preloaded with the NVIDIA JetPack SDK and offers Gigabit Ethernet, four USB 3.2 ports, and HDMI 2.1 output. Wireless connectivity could be added through the system’s M.2 Key E socket. reComputer J4012 / J401 specifications: SoM – NVIDIA Jetson Orin NX 16GB with CPU – 8x Arm Cortex-A78AE core @ up to 2.0 GHz with 2MB L2 + 4MB L3 cache GPU/AI 1024-core NVIDIA Ampere GPU with 32 Tensor Cores @ up to 918 MHz 2x NVDLA v2.0 @ 614 MHz PVA v2 vision accelerator 100 TOPS AI performance (sparse) Video Encoder (H.265) 1x 4Kp60 | 3x 4Kp30 6x […]

November 16, 2022 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Giveaway Week 2022 winners announced!

CNX Software’s Giveaway Week 2022 has just ended, and it’s time to announce the winners. Just like last year, some companies added to the review samples I offered with Rakwireless and ELECFREAKS offering a LoRaWAN devkit and an educational robot respectively. If you check out the photo of the items given away below you’ll find quite more than seven because the SONOFF NSPanel kit includes four Zigbee modules, and more importantly, we also organized a parallel giveaway week on CNX Software Thailand with small boards such as the Raspberry Pi Zero W or XIAO BLE. We had eight winners on CNX Software: NanoPi R5S gateway – Ingmar, GERMANY e-con Systems e-CAM20_CURB camera – Johnny, ESTONIA Pico:ed Smart Cutebot Kit – jednorozec, CZECH REPUBLIC Pico:ed V2 board – Leonardo, BRAZIL Sonoff NSPanel Pro and Zigbee modules – Tim, CANADA RAK Developer Kit (Air Quality Kit) – Magnus, SWEDEN GL.iNet GL-S10 BLE […]

October 17, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

$858 Linux mini PC features NVIDIA Jetson Xavier NX 8GB module, 128GB NVMe SSD

Seeed Studio is now selling the “A203 Mini PC” industrial Linux mini PC based on an NVIDIA Jetson Xavier NX module with 8GB RAM, and a 128GB SSD loaded with JetPack 5.0.2 (Ubuntu 20.04). If the name is familiar it’s because it is based on the Leetop A203 carrier board introduced about a year ago, with HDMI, two USB 3.0 ports, RS232, and other I/Os. The mini PC also offers Gigabit Ethernet, WiFi, and Bluetooth connectivity, and is designed to operate in the -20°C to 80°C temperature range for embedded, industrial, and functional safety applications. A203 mini PC specifications: System-on-Module – NVIDIA Jetson Xavier NX with hexa-core Armv8 processor, 384-core Volta GPU, 8K/4K video decoder and 4K video encoder, up to 21 TOPS of AI performance, and 8GB LPDDR4x Storage – 128GB M.2 NVMe SSD, MicroSD slot Display – HDMI 2.0 Type-A port up to 4Kp60 Camera – 1x MIPI […]