sensors News - CNX Software - Embedded Systems News

April 29, 2025April 30, 2025 by Debashis Das - No Comments

Inventia MT-718 PS battery-powered IP68 industrial telemetry logger integrates environmental sensors, cellular IoT connectivity

Inventia MT 718 PS battery operated telemetry logger with IP68 protection

Inventia MT-718 PS is a compact, battery-powered industrial telemetry logger designed for monitoring, logging, and data transmission in industrial and environmental applications, especially in areas where grid power supply and access to infrastructure are limited. It supports 2G/4G LTE Cat 1 or NB-IoT/LTE Cat M1 (eMTC) connectivity, and comes with an IP68-rated waterproof housing, allowing operation under 2 meters of water for up to 24 hours. Key features include five binary/counter inputs, two analog inputs (0–5V with 4–20mA conversion option), and built-in pressure (0–10 bar), temperature, and humidity sensors, as well as RS-485 with Modbus RTU support. The logger also features two digital outputs, can store up to 60,000 records at 1-second intervals, offers an optional OLED display, and supports OTA firmware updates. It is powered by replaceable alkaline or lithium batteries for long-term, maintenance-free operation and includes tamper detection via a lid sensor. The MT-718 OS can be used […]

April 26, 2025April 26, 2025 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Air Lab is a portable Wi-Fi & Bluetooth LE air quality monitor with an e-paper touchscreen display (Crowdfunding)

Networked Artifacts’ Air Lab is a portable air quality monitor based on ESP32-S3 Wi-Fi & Bluetooth LE wireless SoC, equipped with an e-paper touchscreen display, and plenty of sensors to measure CO2, temperature, relative humidity, air pollutants (VOC, NOx), and atmospheric pressure. The Air Lab ships with a rechargeable 1,500 mAh battery that will be good for about 21 days on a charge in passive mode (taking measurements every minute), and you can also power it over its USB-C ports. It includes a debug port for people wanting to change the firmware, and a GPIO header to connect additional sensors if required. Data can be visualized on the e-paper display or transmitted over BLE or MQTT for integration with Home Assistant. The company also provides a CSV export function and a web-based dashboard for data visualization. Air Lab specifications: Main module – ESP32-S3 module with PCB antenna for 2.4GHz WiFi […]

April 24, 2025April 24, 2025 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Microchip launches low-cost, low-power PIC16F17576 8-bit microcontrollers for analog sensors

Microchip PIC16F17576 8-bit MCUs are designed for low-cost and low-power analog sensors. They integrate a low-power comparator and voltage reference combination that can operate while the MCU core is in sleep mode, consuming less than 3.0 µA of current during analog measurements. The PIC16F17576 microcontrollers are equipped with up to four operational amplifiers (op amps) with software-controlled gain ladders, and a 12-bit differential ADC with automated averaging. Key applications include vibration and strain measurement, flow metering, gas detection, cold asset tracking, and motion sensing. PIC16F17576 specifications: Core – C Compiler Optimized RISC Architecture @ 32 MHz Memory and Storage Up to 2 KB of data SRAM Up to 28 KB of program flash memory Up to 256 bytes of data EEPROM memory Programmable code protection and write protection Digital Peripherals 2x Capture/Compare/PWM (CCP) Modules (16-bit resolution for Capture/Compare modes; 10-bit resolution for PWM mode) 2x 16-bit PWM 4x Configurable Logic […]

April 23, 2025 by Debashis Das - 3 Comments

Sony AS-DT1 tiny industrial LiDAR depth sensor can operate under bright conditions (up to 100,000 lux)

Sony AS-DT1 is a tiny and precise LiDAR depth sensor, which the company claims is the world’s smallest at just 31 x 29 x 29mm and the world’s lightest at 50 grams compared to other solutions with a range of 10 meters or more. It is designed for applications such as drones for inspections and surveys, autonomous mobile robots, food service robots, and warehouse automation. The LiDAR module uses Direct Time of Flight (dToF) LiDAR technology with a Single Photon Avalanche Diode (SPAD) sensor to deliver fast, accurate three-dimensional distance measurements both indoors and outdoors. According to the company, the sensor can measure a range of up to 40 meters indoors and 20 meters outdoors, even in bright light, with ±0.2-inch (+/-0.5mm) accuracy at 10 meters, and a distance resolution of 0.98 inches (2.5cm). Featuring a rugged yet lightweight aluminum alloy housing, two USB-C ports, and connectors for external power, […]

April 18, 2025April 20, 2025 by Jean-Luc Aufranc (CNXSoft) - No Comments

Openviro Axe PoE is an RP2040-based environmental sensor for server rooms and cabinets (Crowdfunding)

Openviro Axe PoE is a rack-mountable, open-source environmental sensor designed to measure the temperature and humidity (and air pressure) in server rooms or cabinets with electrical equipment. The device is based on a Raspberry Pi RP2040 board with Ethernet connectivity housed in an aluminum enclosure and equipped with two RJ12 connectors for Bosch BME280 sensors with an accuracy of +/- 0.5°C. It provides better results than sensors placed in a machine that may be impacted by the internal components’ heat dissipation. For instance, the two sensor inputs can be used to measure the temperature and humidity of the intake and exhaust in a server rack. Openviro Axe PoE specifications: Microcontroller – Raspberry Pi RP2040 dual Arm Cortex-M0+ @133 MHz with 264 KB SRAM Storage – 16 MB flash memory Network – 10/100Mbps Ethernet RJ45 port via LAN8710Ai Expansion – 2x RJ12 connector for THP Probes Misc – 3x Buttons Power […]

April 15, 2025April 15, 2025 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

SONOFF SNZB-02LD and SNZB-02WD IP65-rated Zigbee LCD Smart thermometers work with liquids or outdoors

SONOFF SNZB-02LD IP65 Zigbee LCD Thermometer

ITEAD has introduced two new SONOFF devices: the IP65-rated SNZB-02LD and SNZB-02WD Zigbee 3.0 LCD Smart thermometers designed to work in liquids or enclosed spaces such as bathtubs or refrigerators, or outdoors in gardens or other humid environments, respectively. Both devices look similar and can measure temperature with +/- 0.5°C accuracy, but the SONOFF SNZB-02LD model ships with a 1.5m long probe to measure the temperature of liquids in a pool, a bathtub, or fermentation vessel (for beer or wine making), as well as in refrigerators. On the other end, the SNZB-02WD features a built-in temperature and humidity sensor. SONOFF SNZB-02WD/LD specifications: MCU – Telink TLSR8656F512ET32 (part of the TSL8656 family – See PDF datasheet ) Zigbee/RF4CE SoC with 32-bit RISC MCU, 64kB SRAM, 512kB internal Flash Display – 2.2-inch LCD Wireless – Zibgee 3.0 (802.15.4 radio on TSL8656) Temperature and Humidity sensor SNZB-02WD (internal) Temperature Range – -20°C to […]

April 10, 2025April 10, 2025 by Jean-Luc Aufranc (CNXSoft) - No Comments

PiEEG kit – A Raspberry Pi 5-based bioscience lab in a suitcase (Crowdfunding)

Yesterday we wrote about using quantum sensors for brain-computer interfaces (BCI) and other biomedical applications. But that’s the future, and if you want to experiment with brain-computer interface technology and bioscience, the PiEEG kit has everything you need to get started, with all components fitting in a suitcase easy to carry around between your home and university or school. The bioscience home lab is based on the PIEEG Shield for Raspberry Pi introduced in 2023, and features a Raspberry Pi 5 8GB, a 9-inch display, a sensor board, EEG electrodes and cables for brainwave measurement, and electrodes for EMG (muscles), EKG (heart), and EOG (eye) signal recording. The PiEEG kit is comprised of the two main custom boards with the following specifications/features: PiEEG Shield on top of the Raspberry Pi 5 ADC – Texas Instruments ADS1299 Analog-to-Digital Converter for biopotential measurements Host interface – 40-pin GPIO header with SPI protocol […]

April 9, 2025April 9, 2025 by Jean-Luc Aufranc (CNXSoft) - No Comments

IOL HAT adds an IO-Link compatible master to Raspberry Pi for industrial IoT sensors and actuators

Pinetek Networks’ IOL HAT is a Raspberry Pi expansion board using the IO-Link (IEC 61131-9) protocol to interact with industrial sensors. It’s based on the Analog Devices MAX14819 IO-Link master transceiver and offers two SDCI (“Single-Drop Digital Communication”) connectors. While work on the IO-Link communication protocol started in 2006, and the IEC 61131-9 “Single-drop digital communication interface (SDCI) for small sensors and actuators” standard was adopted in 2013, it only recently came onto our radar with products like the STMicro EVLIOL4LSV1 IO-Link actuator board and Renesas CCE4511 IO-Link master and ZSSC3286 IO-Link sensor signal conditioner. The IOL HAT brings the IO-Link standard for industrial IoT communication to the Raspberry Pi. IOL HAT specifications: IO-Link chip – Analog Devices MAX14819 dual IO-Link master transceiver with integrated framers and L+ supply controllers 2x SDCI ports for IEC 61131-9 (IO-Link) sensors and actuators Host connection (one or the other) PT-1201 model – 40-pin […]