server

Posted on by Jean-Luc Aufranc (CNXSoft) - 15 Comments on Supermicro A2SDi-2C-HLN4F Server Mini-ITX Motherboard is Based on Intel Atom C3338 “Denverton” Processor

Supermicro A2SDi-2C-HLN4F Server Mini-ITX Motherboard is Based on Intel Atom C3338 “Denverton” Processor

Almost exactly one year ago, I wrote about Intel Atom C3000 Series “Denverton”  processor based on the same Goldmont architecture used in Apollo Lake processor, and used in an early GIGABYTE MA10-ST0 server motherboard prototype. The latter is not out yet, but according to a YouTube video, the 16-core motherboard should be launched in H2 2017. In the meantime, Supermicro also made their own Denverton motherboard based on a lower-end Atom C3338 dual core processor. Supermicro A2SDi-2C-HLN4F board specifications: Processor – Intel Atom C3338 dual core Denverton processor @ 1.50 / 2.20 GHz with 4 MB  cache; 9W TDP System Memory Up to 64GB Register DIMM RDIMM and DDR4-1866MHz Up to 32GB Unbuffered ECC/non-ECC UDIMM, DDR4-1866MHz, in 2 DIMM slots Storage – 4x SATA 3 ports, but up to 8x SATA 3 (6 Gbps) ports are configurable; N.B.: total combined PCI-E lanes and SATA ports is up to 8 Connectivity […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 49 Comments on The First Amlogic S912 Development Board is Coming Soon with Khadas VIM2

The First Amlogic S912 Development Board is Coming Soon with Khadas VIM2

We have a decent choice of Amlogic S905 development boards like ODROID-C2 or NanoPi K2, but I was recently asked whether I knew of any Amlogic S912 development boards. I’m sure Amlogic has one for internal development, but those are hard to get, and probably expensive, and while you could probably get an S912 TV box board those lack I/Os, and software support may truly be a challenge. So I’m pleased to announce that Shenzhen Wesion will soon provide an update to their Khadas VIM Pro board with Khadas VIM2 powered by Amlogic S912 octa-core processor. The company will actually offer three variants of Khadas VIM2 boards (Basic/Pro/Max) specifications with highlights in bold showing differences with Khadas VIM Pro board: SoC –  Amlogic S912 octa core ARM Cortex-A53 @ up to 1.5 GHz with ARM Mali-820MP GPU System Memory Basic – 2 GB DDR4 Pro/Max – 3 GB DDR4 Storage […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 15 Comments on U5PVR Deluxe Set-Top Box & NAS Review – Part 2: Android TV, Debian, and Live TV App

U5PVR Deluxe Set-Top Box & NAS Review – Part 2: Android TV, Debian, and Live TV App

U5PVR Deluxe is an set-top box with digital TV tuners that runs Android TV 5.1, and support 2.5″ and 3.5″ hard drive. I’ve received a model with a dual DVB-T/T2 tuner, and already posted “U5 PVR Deluxe Android Set-Top Box Review – Part 1: Specs, Unboxing, Teardown, and SATA HDD Assembly” a few weeks ago, where I described the hardware, and I inserted a one terabytes 3.5″ hard drive. I’ve now had time to test the device, but it took much longer than expected due to a partial firmware update issue, which forced me to redo many of the tests. There are also some undocumented features, so if you want to make the most of the device, be prepared to spend time in the forums. U5PVR Connections, OTA Firmware Update, and Setup Wizard The box have one USB 3.0 ports, and three USB 2.0 ports, so most people won’t need […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 38 Comments on Helios4 Personal Cloud DIY NAS Supports 3.5″ Hard Drives, RAID, and More (Crowdfunding)

Helios4 Personal Cloud DIY NAS Supports 3.5″ Hard Drives, RAID, and More (Crowdfunding)

A few months ago, we covered GnuBee Personal Cloud 1, a NAS that runs on open source software, and that supports up to six 2.5″ SATA drives. The crowdfunding has been successful – after lowering the funding target -, and backers should hopefully get the NAS right after summer. But at the time, some people complained about the  memory capacity (512MB),  the lack of support for 3.5″ drives, and a few other items. A new project called “Helios4 Personal Cloud” addresses many of those concerns. It comes with 1 to 2GB RAM, enclosure supporting four 3.5″ drives, supports RAID, and is powered by Marvell ARMADA 388 processor that has been specifically designed for this type of application. Helios4 NAS specifications: SoC – Marvell ARMADA 388 dual core Cortex A9 processor @ up to 1.866 GHz with RAID5/6 acceleration engines, security acceleration engines, etc… System Memory – 1 or 2 GB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Christmann RECS|Box Atlas Quad Apalis Microserver Evaluation Kit Supports Four Toradex Apalis SoM

Christmann RECS|Box Atlas Quad Apalis Microserver Evaluation Kit Supports Four Toradex Apalis SoM

System-on-modules are normally used in low volume embedded systems, but they can also be used in microservers, for example to upgrade capacity as needed. Christmann informationstechnik + medien GmbH has developed a microserver evaluation kit taking up to 4 Toradex Apalis SoMs for example based on Nvidia Tegra K1 processor, and also offers full rack systems with up to 72 modules. Christmann RECS|Box Atlas Quad Apalis specifications: Modules – 4x Slots for Apalis SoM Connectivity – 1 GBit/s Compute Ethernet, 1 GBit/s Management Ethernet Video Output – 1x HDMI USB – 3x USB host ports, 1x micro USB port Misc – 5 Status LEDs for USB, communication, and serial console, 4x fan connectors, KWM switch, 5x temperature sensors, 6x current sensors, 1x voltage monitor, fan speed monitoring Power Supply – 12V via a 4-pin jack Dimensions – 300 x 145 x 68 mm The evaluation kit includes an Atlas board […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Packet 96-core Cavium ThunderX Baremetal ARMv8 Servers are Available for $0.50 per Hour, $372 per Month

Packet 96-core Cavium ThunderX Baremetal ARMv8 Servers are Available for $0.50 per Hour, $372 per Month

Last week, I wrote about Scaleway ARMV8 cloud servers powered by Cavium ThunderX processors. They are very cheap, as low as 0.0006 Euros per hour or 2.99 Euros per month, but you only get access to 2 to 8 cores, so obviously you don’t get a baremetal server for that price.  If you want the latter Packet.net has been offering just that since the end of last year with their Type 2A baremetal server with two Cavium ThunderX 48-core processors, 128 GB RAM, 384 GB SSD and 20 Gbps bandwidth. The servers can currently run Centos 7, CoreOS, Ubuntu 16.04 LTS,  with support for container platforms such as CoreOS Tectonic, Rancher, Docker Cloud, ContainerShip, StackEngine, Docker Machine, etc… You can check the status for other operating systems and features and the roadmap page. They also have x86 servers, and I’ve included the hourly and monthly prices and features for all […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 22 Comments on Cavium ThunderX based Scaleway ARMv8 Cloud Servers Go for 2.99 Euros per Month and Up

Cavium ThunderX based Scaleway ARMv8 Cloud Servers Go for 2.99 Euros per Month and Up

Scaleway launched 32-bit ARM server hosting services in 2015 for 10 Euros per month, before dropping the price to 2.99 Euros per month half-year later, and now the company has just launched a new offering with 64-bit ARM servers powered by Cavium ThunderX processor going for 2.99 to 11.99 Euros per month depending on configuration. The processors are equipped with DDR4 ECC memory, and all three services included unlimited transfer, so you don’t need to pay for any bandwidth fee. While the price is shown per month, you’ll be billed by the hour (0.006 Euro/h for ARM64-2GB), so if you are using those for development it may even cost less per month, as you can turn them off when not working. All server are located in a Paris data center in France, and runs Ubuntu 16.04, but more operating systems and “InstantApps” will be added to the selection. More servers […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Headless Mode to be Supported in Chrome and Firefox Browsers

Headless Mode to be Supported in Chrome and Firefox Browsers

Good news! You can now use Chrome browser without display… Wait… What? While most users want to actually see the page they load in a web browser, some may want to run their browser in a server without display. Headless mode in web browsers can be used for automated testing requiring loading web pages, extracting metadata, generating bitmaps from page contents, etc… It’s been possible to do so in the past using Xvfb to emulate a framebuffer tricking the browsers to believe there was a display in Linux. But now headless mode is build-in right into browsers, so you don’t need X server running at all, and beside Linux, it will also work in Windows, and Mac OS. You can launch headless mode in Chrome 59 (currently in dev channel) as follows:

You may want to add –disable gpu option to remove an error message. Then go to http://localhost:9222, […]