wifi 7 News - Page 4 of 4 - CNX Software

May 23, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

MediaTek Filogic 880 and Filogic 380 to power WiFi 7 access points and clients

I first heard about WiFi 7 (802.11be) when MediaTek demonstrated some unknown Filogic solutions to customers, but few details were known at the time. The company has now formally announced the Filogic 880 and Filogic 380 WiFi 7 solutions designed for access points and clients respectively. MediaTek Filogic 880 for WiFi 7 access points, gateways, and routers Filogic 880 specifications: CPU – Quad-core Arm Cortex-A73 application processor @ up to 1.8 GHz (about 30K DMIPS performance) AI accelerator – Advanced NPU (previously called “packet accelerator” or “off-load engine” :)) with HW NAT/IPv6 acceleration, QoS acceleration, (EIP-197) crypto engine for accelerating IPSec, SSL/TLS, DTLS (CAPWAP), SRTP and MACsec, etc… System Memory – Up to 8GB 32-bit DDR3/DDR4 3200 Storage – SPI NOR flash, SPI NAND flash, eMMC flash Networking Wired 2x 10 Gbps Ethernet 1x 2.5 Gbps Ethernet 4x 1 Gbps Ethernet Wireless Wi-Fi 7 technologies such as 4096-QAM, 320MHz, MRU, […]

May 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Qualcomm Wi-Fi 7 Networking Pro Series SoCs support up to 33 Gbps PHY rate, up to 2,000 clients

Qualcomm has announced the Wi-Fi 7 capable Qualcomm Networking Pro Series Gen 3 family designed for routers and access points with a PHY rate up to 33 Gbps with the quad-band 16-stream Networking Pro 1620 platform and offers some competition to the recently announced Broadcom WiFi 7 access point chips. The company will also offer the tri-band 12-stream Networking Pro 1220 with up to 21.6 Gbps aggregated link rate, the quad-band 8-stream Networking Pro 820 capable of 16.5 Gbps PHY rate, and at the low-end of the scale, the Networking Pro 620 limited to 10.8 Gbps with three bands and six streams. Qualcomm Networking Pro 1620 (IPQ9574) platform specifications: CPU – Quad-core Arm Cortex-A73 @ 2.2 GHz System Memory – DDR3L, DDR4 16/32-bit Storage – eMMC, NAND, Serial NOR, SD/eMMC Networking Wired – 6 Port Integrated Ethernet Switch 4 x 2.5 GbE + 5 GbE + 10 GbE Wireless Wi-Fi […]

April 13, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Broadcom unveils WiFi 7 chips for access points and clients

BCM4916 WiFi 7 access point with bcm27263 and bcm6726

We first noticed the new WiFi 7 (802.11be) standard in January 2022 with MediaTek demonstrating Filogic 802.11be processors, and later Qualcomm introduced the FastConnect 7800 WiFi 7 and Bluetooth 5.3 solution for wireless clients, but we had not seen anything for WiFi 7 access points yet. Broadcom has now announced four WiFi 7 chips for access points with the BCM67263, BCM6726, BCM43740, and BCM43720 up to 11.5 Gbps PHY rate, plus the BCM4398 Wi-Fi 7 and Bluetooth 5 combo chip for mobile handsets with up to 6.05 Gbps PHY rate. We’ve not quite at the theoretical 40+ Gbps PHY rate for WiFi 7, but those solutions will more than double the speed of existing Wi-Fi 6/6E solutions, while simultaneously delivering lower latency and extending range. The BCM67263 and BCM6726 chips are designed for the residential Wi-Fi 7 access point market with the following key features: Support for 4 streams of […]

March 1, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Qualcomm announces FastConnect 7800 WiFi 7 & Bluetooth 5.3 solution

Qualcomm FastConnect 7800 WiFi 7 chip highlights

Qualcomm has just announced the FastConnect 7800 WiFi 7 and Bluetooth 5.3 subsystem for smartphones, laptops, and virtual reality headsets promising peak speeds of 5.8 Gbps as well as sub-2 millisecond latency. We first detailed some of WiFi 7 features such as up to 40 Gbps link, and real-time capabilities when MediaTek showcased its future 802.11be compliant Filogic processor to customers, so it should be no surprise that Qualcomm had been working on its own solution, and announced it at Mobile World Congress 2022. Qualcomm FastConnect 7800 (WCN785x-1, WCN785x-5) specifications: Wi-Fi Standards – Wi-Fi 7 (802.11be), Wi-Fi 6E, Wi-Fi 6 (802.11ax), 802.11ac Wave 2, 802.11a/b/g, 802.11n Spectral Bands: 2.4GHz, 5GHz, 6GHz Peak QAM: 4K QAM Peak speed: 5.8Gbps or 4.3Gbps where the 6GHz spectrum is not available Features 4-stream Dual-band simultaneous (DBS) extended into the High Bands Multi-Link Operation (MLO) using 320 MHz (Single channel or 160 + 160) 8×8 […]

January 20, 2022January 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

WiFi 7 (802.11be) will support up to 40 Gbps links, real-time applications

I still don’t own a WiFi 6 router, but MediaTek has already started to demonstrate WiFi 7 (802.11be) to customers with solutions based on upcoming Filogic 802.11be processors which deliver “super-fast speeds and low latency transmission” and provide a “true wireline/Ethernet replacement for super high-bandwidth applications”. The company goes on to explain that Wi-Fi 7 relies on the same 2.4GHz, 5GHz, and 6GHz frequencies as WiFi 6/6E, but can still provide 2.4x higher speeds than Wi-Fi 6, even with the same number of antennas, since WiFi 7 can utilize 320Mhz channels and support 4K QAM (quadrature amplitude modulation) technology. There’s limited information about MediaTek Filogic 802.11be WiFi 7 processors since it will take a few more years before becoming available, but we can find more details in a document entitled “Current Status and Directions of IEEE 802.11be, the Future Wi-Fi 7” from IEEE Xplore. Here are some of the […]