Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Vecow unveils MediaTek Genio 350, Genio 500, and Genio 1200 system-on-modules and development kits

Vecow unveils MediaTek Genio 350, Genio 500, and Genio 1200 system-on-modules and development kits

ESOM-MT-1200-CB

Vecow has announced a series of new system-on-modules and development kits based on Mediatek Genio 350, Genio 500, or Genio 1200 processors for AIoT applications ranging from smart security, smart retail, and traffic vision to digital signage. This follows last week’s news about ADLINK LEC-MTK-I12000 SMARC module and devkit powered by MediaTek Genio 1200 Cortex-A78/A55 AIoT processor, but Vecow also offers solutions based on the entry-level Genio 350 quad-core Cortex-A53 processor, and the mid-range Genio 500 octa-core Cortex-A73/A53 processor. ESOM-MT-350 Genio 350 system-on-module and devkit Specifications: SoC – MediaTek Genio 350 quad-core Cortex-A53 processor @ 2.0GHz with Mali-G52 GPU with support for OpenGL ES 3.2, OpenCL ES 2.0, and Vulkan 1.1, 1080p60 H.265/H.264 video decoder System Memory – 2GB LPDDR4 SDRAM Storage – 16GB eMMC flash Wireless – MT7668 WiFi 5 and Bluetooth 4.2 module with IPEX connector Audio – MediaTek MT6390/6357 audio codec Debugging – On-module debug console port […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Cavli Wireless C42GM module offers cellular IoT and Sigfox connectivity, optional GNSS and CAN Bus

Cavli Wireless C42GM module offers cellular IoT and Sigfox connectivity, optional GNSS and CAN Bus

Cavli Wireless C42GM cellular IoT sigfox module

Selecting an LPWAN IoT module usually means selecting a particular LPWAN standard, but Cavli Wireless C42GM global IoT module combines LTE Cat M1 and NB-IoT (NB1/NB2) cellular IoT connectivity with Sigfox for “use cases that need the hybrid LPWAN approach”. The module also comes with optional GNSS for asset tracking and/or time synchronization and there’s also a variant that adds CAN FD wired communication. The C42GM module can also be fitted with an eSIM (embedded SIM) pre-loaded global connectivity. C42GM module specifications: LPWAN Cellular (NB-IoT and eMTC) Bands Supported – LTE Bands: B1/B2/B3/B4/B5/B8/B12/ B13/B18/B19/B20/B25/B26/B28/B66 3GPP Release: LTE 3GPP E-UTRA Release 13 CAT M1/NB1/NB2 (Upgradable to Release 14) Download & Uplink Speed LTE Cat M1 – 1119Kbps (UL), 588Kbps (DL) NB1 – 60Kbps (UL), 20Kbps (DL) NB2 – 158.5Kbps (UL), 127Kbps (DL) Optional eSIM Optional Sigfox GNSS – GPS, GLONASS, Beidou I/Os – 1x USB2.0, 2x UART, 1x USIM, 9x GPIO, […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Think Silicon NEOX RISC-V GPU offers 3D graphics or AI acceleration

Think Silicon NEOX RISC-V GPU offers 3D graphics or AI acceleration

Think Silicon NEOX RISC-V GPU

Think Silicon NEOX GPU family with models optimized for graphics (NEOX|G) or artificial intelligence (NEOX|A) is based on the RISC-V RV64C ISA instruction set with adaptive NoC, and offers up to 64 cores delivering up to 409.6 GFLOPS at 800MHz with support for FP16, FP32 and optionally FP64 and SIMD instructions. The NEOX GPUs can be integrated into microcontrollers, crossover processors, and even more powerful application processors, and target AI, IoT/Edge, and media processing in consumer and industrial devices. Each shader of the GPU is a programmable 64-bit RISC-V (RV64GC) core running a real-time operating system (RTOS) and the GPU is supported by lightweight graphics and machine learning frameworks. The multi-threaded GPU system can be customized for graphics, machine learning, vision/video processing, and general-purpose compute (GPGPU) workloads. The solution is meant to be integrated into 32-bit SoCs designed for smartwatches, augmented reality (AR) eyewear, video surveillance, and smart display terminals […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Hybrid Time-of-Flight (ToF) 3D range image sensor offers up to 30-meter range

Hybrid Time-of-Flight (ToF) 3D range image sensor offers up to 30-meter range

ToF sensor 30-meter range

We’ve written about STMicro Time-of-Flight ranging sensors several times over the year, including the latest VL53L8 which offers a range of up to 4 meters. But if your application would benefit from a more extended range, Toppan and Brookman Technology have designed a three-dimensional range image sensor (3D sensor) capable of measuring distances from one to 30 meters. using a hybrid Time-of-Flight (ToF) method. That method, proposed by Professor Shoji Kawahito of Shizuoka University, is a new sensing technology combining the indirect ToF method of measuring distance by phase difference and the direct ToF methodology for measurement based on time differences. The hybrid method is said to be more tolerant to ambient light noise than the conventional indirect ToF method, especially outdoors. Highlights of the hybrid ToF sensor: Measurement of distances up to 30 meters, or over 5x further than conventional models Noise-canceling function to facilitate outdoor measurement. Each pixel […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Iono RP D16 industrial IO module features Raspberry Pi RP2040 MCU

Iono RP D16 industrial IO module features Raspberry Pi RP2040 MCU

Iono RP D16 industrial IO module Raspberry Pi RP2040

Sfera Labs has launched another Raspberry Pi RP2040-based hardware platform with the Iono RP D16 industrial IO module following the Exo Sense RP multi-sensor module we covered last month. The Iono RP D16 module provides sixteen digital 24V I/O lines, an RS-485 serial interface, a wide range 12-28V power supply input, and its DIN-rail case enables installation in electrical cabinets and automation control systems. Iono RP D16 specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex-M0+ microcontroller @ 133MHz with 264kB on-chip SRAM Storage – 16MB SPI flash Inputs/Outputs via terminal blocks Up to 16x 24V 640mA outputs driven by high-side switches that can also be configured as push-pull drivers for high-speed switching (via MAX14912 chips) Up to 16x 24V IEC 61131-2 compliant current-sinking inputs (via MAX22190 chips) 4x TTL level I/Os (1-Wire, I2C, Wiegand support) Serial  –  RS-485 interface to the RP2040 serial lines via terminal block with electrostatic […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on BP Doctor PRO review – A 2-in-1 smartwatch and blood pressure monitor

BP Doctor PRO review – A 2-in-1 smartwatch and blood pressure monitor

YHE BP Doctor Pro 2-in-1 smartwatch & blood pressure monitor

So far, If I wanted to monitor my blood pressure monitor and overall fitness, I’d use a Bluetooth blood pressure monitor (Koogeek BP2) plus a fitness tracker/smartwatch such as Weloop Key S3. It does the job, but WearWiz has come up with something much more compact with the BP Doctor Pro 2-in-1 device that acts as both a smartwatch/fitness tracker and a blood pressure monitor, and at $299, offers a cheaper alternative to the $500 FDA-approved Omron Heartguide. The company sent a sample to CNX Software for review, so we’ll have a look at the device and accessories, the Android app, and features such as blood pressure monitoring, HRM, SpO2 level monitoring, and more. The review is rather long, so if you are short on time, you may want to check the two sections: Blood pressure monitoring with BP Doctor PRO smartwatch Conclusion with Pros and Cons BP Doctor PRO […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Mixtile reveals U.2 to PCIe/SATA breakout board for Rockchip RK3588 cluster

Mixtile reveals U.2 to PCIe/SATA breakout board for Rockchip RK3588 cluster

Mixtile Blade 3 cluster: boards connection

Mixtile Blade 3 is a Rockchip RK3588 SBC with up to 32GB RAM designed for server applications, notably to build clusters through a U.2 edge connector with 4-lane PCIe Gen3, SATA 3.0 to interconnect multiple boards. What was not clear so far is how multiple boards would be connected, as we were just shown two boards connected by a U.2 cable, which does not scale, and does not provide power as the 12V input also comes with the U.2 connector. The company has now provided more details showing how it’s done, namely through a breakout board that connects to the U.2 edge connector, and allows cluster design as shown below. The U.2 breakout board comes with a 6-pin connector 12V power, pair of SFF-8643 (mini SAS) connectors for PCIe daisy-chaining, and a SATA port. Since short SFF-8643 cables are hard to find, Mixtile will provide custom 15-cm cables with the […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on u-blox unveils miniature MIA-M10 GPS module

u-blox unveils miniature MIA-M10 GPS module

u-blox MIA-M10Q miniature GPS module

u-blox has introduced what could be the world’s smallest GNSS module with the 4.5×4.5mm u-blox MIA-M10 miniature module supporting GPS, BeiDou, Galileo, and GLONASS satellite navigation systems. The MIA-M10 is said to be about half the size of competing products and has been specially designed for size-constrained battery-powered asset tracking devices, as well as space-constrained industrial sensors and consumer goods. The company also claims its power-save modes can double the battery life by balancing position accuracy and power consumption. u-blox MIA-M10 GNSS module specifications: GNSS – BeiDou, Galileo, GLONASS, GPS / QZSS Number of concurrent GNSS – 4 Oscillators MIA-M10C – Crystal MIA-M10Q – TCXO MIA-M10Q only – SAW filter, LNA Host Interfaces – 1x UART, 1x DDC (I2C compliant) Supply Voltage MIA-M10C  – 1.3 to 1.98V MIA-M10Q – 1.76V to 3.6V Power Consumption – < 25 mW Dimensions – 4.5 x 4.5 x 1.0mm Temperature Range – -40°C to […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications