CNX Software - Embedded Systems News

December 2, 2020December 2, 2020 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Khadas Tone 2 Pro mini desktop Hi-Fi system supports MQA decoding, balanced RCA outputs

Khadas Tone high-resolution audio board was introduced in 2018 for audiophiles wanting to design their own DIY HiFi system using Khadas VIM/VIM2 SBC, or connect it the USB version of the board to other single board computers. The company is now about to launch Khadas Tone 2 Pro mini desktop Hi-Fi system based on the same ESS ES9038Q2M DAC, but a faster XMOS XU216 capable of handling MQA decoding, and equipped with balanced RCA outputs, as well as an I2S USB-C port. Khadas Tone 2 Pro key features and specifications: Multicore MCU – XMOS XU216 with 16 real-time logical cores on 2x xCORE tiles; up to 1000 MIPS DAC – ES9038Q2M 32-bit stereo mobile audio DAC Amplifiers – 4x OPA1612 operational amplifiers, 3x buffer amplifiers Seamless hardware MQA decoding Native DSD512 decoding, PCM decoding up to 32Bit/384kHz. Left and right balanced RCA jacks for transmitting a balanced analog signal via […]

December 2, 2020December 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

PinePhone KDE Community Edition smartphone with Plasma Mobile now up for pre-order

PinePhone Linux phone first launched as an early adopter phone without any OS when the “Brave Edition” was first introduced in November 2019. Since then Pine64 launched variant with different Linux mobile OS including PinePhone Community Edition: UBports, the PostMarket Edition that also added support for mobile/desktop convergence with a model with more RAM and storage, as well as a USB-C Dock, and more recently there was a batch with PinePhone Manjaro Community Edition. If you haven’t already gotten your hand on one of the earlier models, you’ll be glad to know the PinePhone KDE Community Edition is now available for pre-order for the same $149.99 price tag for the phone only or $199.99 with the convergence package. PinePhone comes with Allwinner A64 quad-core Cortex-A53 processor that been around for many years. It’s not a performance beast, but it’s well supported by the open-source Linux community, and affordable. For $150, […]

December 1, 2020December 1, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Arduino Sensor Kit Base is a large shield for Arduino UNO with 10 modules

Earlier this year, Seeed Studio introduced the Grove Beginner Kit for Arduino that included the Arduino UNO compatible Seeduino Lotus board placed at the center and ten pre-wired and detachable Grove modules to get started with sensors on Arduino with no cabling whatsoever apart from the USB cable. Arduino must have seen and liked the design, and Seeed Studio has collaborated with the Italian company to create the Arduino Sensor Kit Base with a very similar design, but with a twist as instead of an all-in-one platform with modules and an Arduino board, it’s a very large shield that seats on tops of Arduino UNO. The Arduino Sensor Kit base includes the following: Base shield with 16 Grove connectors, instead of just 12 Grove connectors on the Beginner Kit, including 7x digital connectors, 4x analog connectors, 4x I2C connectors, and one UART connector; A 3.3V/5V voltage switch is also included […]

December 1, 2020 by Abhishek Jadhav - 3 Comments

DIY Pi KVM: An easy and cheap KVM over IP for Raspberry Pi

Traditional IP-KVM systems may cost you hundreds of dollars. DIY Pi KVM over IP is a very simple and fully functional Raspberry Pi-based KVM over IP that you can make yourself. If you do not know what IP-KVM is, it stands for keyboard, video, and mouse. It allows you to connect to a computer or a server remotely. With this, you can fix problems such as configuring the BIOS or reinstalling the OS using a virtual CD-ROM or flash drive. You can see the v2 example implementation in the above image. Pi-KVM v0 and v2 are ready-made images available for download for Raspberry Pi. You will find all the required hardware in the “Getting Started” section for the v0 and v2 platform for Raspberry Pi. In the figure below you can see the B101 HDMI-to-CSI bridge connected to the Raspberry Pi. The team is working to launch the v3 board […]

December 1, 2020March 4, 2021 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

Rockchip RK3568 processor to power edge computing and NVR applications

We recently reported on the Rockchip developer conference (RKDC) 2020, and especially the upcoming Rockchip RK3588 Cortex-A76/A55 processor that packs a lot of power and features, and is now scheduled to launch in Q3 2021. But as you can imagine there were other products revealed during the conference, including the new Rockchip RK3568, similar to the previously announced RK3566, and designed for edge computing and network video recorder (NVR) applications. There’s also an RK353X processor specifically designed for NVR application that should have similar performance as RK3568, but a lower cost, as well as two UP camera SoC with RV1106 and RV1128. CNX Software managed to obtain the presentation for the RK3568 processor from the conference so we’ll focus on the quad-core Cortex-A55 processor in this post. Rockchip RK3568 specifications: CPU – Quad-core Cortex-A55 processor with NEON and FPU GPU – Mali-G52 EE with support for OpenGL ES 1.1 to […]

December 1, 2020December 4, 2020 by Jean-Luc Aufranc (CNXSoft) - 35 Comments

NanoPi R4S SBC launched with optional metal case for $45 and up

We found NanoPi R4S board in a work-in-progress Wiki last month. The tiny single board computer is designed for headless applications but comes with much better specifications compared to similar boards with a Rockchip RK3399 hexa-core processor with up to 4GB RAM, dual Gigabit Ethernet, and USB 3.0 ports. At the time we had limited information, but FriendlyELEC has now started selling the board for $45 and up, together with an optional metal case for a fanless operation that should ensure very good cooling. Here’s a reminder of NanoPi R4S specifications: SoC – Rockchip RK3399 hexa-core processor with dual-Core Cortex-A72 up to 2.0GHz, quad-core Cortex-A53 up to 1.5GHz, Mali-T864 GPU with OpenGL ES1.1/2.0/3.0/3.1, OpenCL, DX11, and AFBC support, 4K VP9 and 4K 10-bit H265/H264 60fps video decoder System Memory – 1GB DDR3 or 4GB LPDDR4 Storage – MicroSD card slot Networking – 2x GbE, including one native Gigabit Ethernet, and […]

November 30, 2020November 30, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Fanless Linux embedded system makes a compact IoT gateway

Mitac ME1-108T Linux imx8mm embedded system

ICP Germany has recently introduced the MiTAC ME1-8MD series family of compact, fanless Linux embedded systems powered by NXP i.MX 8M processor and designed to be used as IoT gateways, data acquisition and processing systems, and mini servers. Three models have been launched with a choice of dual or quad-core processors, up to 4GB LPDDR4 RAM, and 32GB eMMC flash storage. The embedded computers also come with up to two Ethernet ports, support up to two displays, and include an internal Raspberry Pi compatible 40 pin GPIO header. MiTAC ME1-8MD specifications and key features: SoC – NXP i.MX 8M Dual or Quad with two or four Cortex-A53 @ 1.3GHz, Cortex-M4 MCU, Vivante GC7000 Lite GPU, and 4K video processing unit System Memory – 1 to 4GB LPDDR4 800 Mhz RAM Storage – 8, 16, or 32GB eMMC flash, 1x MicroSD card slot up to 256GB Video Output HDMI 2.0 Optional […]

November 30, 2020November 30, 2020 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Official Raspberry Pi 4 case fan adds cooling to Raspberry Pi 4 case

When the Raspberry Pi Foundation first introduced the Raspberry Pi 4, they claimed the board would work just fine under most cases without a heatsink, and the latter was only really needed under load. That may have been true when using the board in a temperate climate like in the United Kingdom, but then Raspberry Pi 4 met Thailand with some benchmarks results lower than on a Raspberry Pi 3. People using plastic enclosures had even more troubles. It’s only when I installed a heatsink on Raspberry Pi 4 that the board could really shine. The company also provided some firmware optimizations later on to further cool-down the board. But you can only do much with software, and many third-party cooling solutions such as fansinks or metal cases have been introduced for the popular SBC. But it appears the Raspberry Pi Foundation is now taking cooling into account, and I […]