CNX Software - Embedded Systems News

February 22, 2019February 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

4Kopen UHD Video Development Platform Features STMicro STiH418 Media Processor

Back in 2016, I read news about STMicro exiting the set-top box chipset market, so I just assumed all their STiHxx processors would be phased out, and I was surprised to come across 4Kopen, described as an open 4K UHD video development platform powered by STMicro STiH418 media processor, especially it was just showcased at 2019 Integrated Systems Europe (ISE 2019) at the beginning of the month. The development board comes with 2 GB RAM, HDMI 2.0 output, HDMI 1.4 input, Gigabit Ethernet, USB 3.0, a mini PCIe slot fitted with an 802.11b/g/n WiFi module, an eSATA connector and more. 4Kopen (B2264) hardware specifications: SoC – STMicro STiH418 quad-core Arm Cortex-A9 processor @ 1.2 GHz, quad-core Mali-400 GPU, and 4x ST231 DSP (Each Core Quad issue) @ 650 MHz System Memory – 2 GB DDR3 @ 2133 MHz Storage – micro SD socket, eSATA port Video & Audio I/O Output […]

February 22, 2019February 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

balenaFin Raspberry Pi CM3+/Lite Developer Kit Launched for $179 and Up

Balena.io – previously known as resin.io – first unveiled Resin.io Project Fin in March 2018. The carrier board for Raspberry Pi CM3L was designed with the aim of easing the management of fleets of connected devices thanks to ResinOS operating systems and the ability to deploy apps packaged in containers through their balenaCloud service. The project had been renamed to balenaFin a little while ago, and the company has now announced availability of balenaFin 1.1 developer kit with various improvements including support for PoE, dual camera, and Raspberry Pi CM3+/Lite module. balenaFin v1.1 carrier board specifications with improvements highlighted in bold: Supported SoM Raspberry Pi Compute Module 3 Lite with Broadcom BCM2837 quad-core ARM Cortex A53 processor at 1.2GHz, 1GB RAM Raspberry Pi Compute Module 3+/Lite with Broadcom BCM2837B0 quad-core ARM Cortex A53 processor at 1.2GHz, 1GB RAM Storage – 8, 16, 32, or 64 GB industrial grade eMMC 5.1 […]

February 22, 2019February 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Samsung Galaxy S10, S10+, S10e, S10 5G Launched with Snapdragon 855 or Exynos 9820 SoC

Samsung officially launched the long awaited Galaxy S10 smartphone yesterday sporting either a Qualcomm Snapdragon 855 or Samsung Exynos 9820 processor coupled with 8GB RAM, 128 to 512GB storage, and a 6.1″ display. There are actually four variants of Galaxy S10, with S10+ model coming with up to 12GB RAM, 1TB flash storage, and a 6.4″ display, S10e phone with a smaller 5.8″ display, as low as 6GB RAM, and 128 to 256GB flash storage, and S10 5G with a 5G modem, a larger 6.7″ display, 6 cameras, and a larger 4,500 mAh battery. Many consider Samsung Galaxy phones to be the reference when it comes to Android phones, so let’s have a look at the technical specifications and features to see if there’s anything really new beside more processing power, and memory. Galaxy S10, S10+, S10e, and S10 5G phones share many of the same specifications: SoC (one or […]

February 21, 2019 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

STMicro STM32MP1 Cortex A7/M4 MPU Supports Linux and Android

When Linux 4.17 was released last June, we discovered an interesting new STM32 part: STM32MP157C dual core Cortex-A7 processor. It was the first time I saw an STM32 IC not based on Arm Cortex-M microcontroller core, but we knew only very little details at the time. STMicro has now made it official, and introduced STM32MP1, the first STM32 MPU (Microprocessor Unit) that features one or two Arm Cortex-A7 cores running Linux, as well as an Arm Cortex-M4 real-time core that allows to re-use code from existing STM32 projects. STM32MP1 key features and specifications: Cores Single or Dual Cortex-A7 core(s) running at 650 MHz with 32-Kbyte L1 Instruction cache, 32-Kbyte L1 Data cache, 256-Kbyte Level 2 cache Cortex-M4 core running at 209 MHz with single-precision floating point unit (FPU), digital signal processor (DSP) instructions, and memory protection unit (MPU) GPU (STM32MP157 only) – Vivante 3D GPU with OpenGL ES 2.0 support; […]

February 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

CompuLab UCM-iMX8M-Mini is a Stamp Size i.MX 8M Mini SoM

We’ve recently written about several new hardware platforms based on the latest NXP i.MX 8M Mini processor family including Nitrogen8M_Mini SBC and F&S Elektronik PicoCore MX8MM SoM. Thanks to a new 14-nm process, the new family has the advantage of consuming less power, and the Cortex-A53 cores can run at a higher frequency. They should cost less as well thanks to cost-saving measures like the adoption of a 1080p video decoder instead of a 4K decoder found in the older NXP i.MX 8M family. CompuLab has now launched their own NXP i.MX 8M Mini SoM with UCM-iMX8M-Mini module that’s about the size of a largish stamp (38 x 28 mm) suitable for portable and space constrained applications such as professional handheld devices, wearable healthcare monitors and medical devices, autonomous drones with visual object recognition, or portable instrumentation equipment with advanced HMI. CompuLab UCM-iMX8M-Mini SoM specifications: SoC (one or the other) […]

February 20, 2019February 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

NanoPi R1 is an Allwinner H3 Gateway with Dual Ethernet, WiFi and Bluetooth

A couple of years ago, Shenzhen Xunlong Software launched Orange Pi R1 board powered by Allwinner H2+ processor with two Fast Ethernet ports, and some I/Os which could be useful for intelligent controllers and simple IoT gateways. FriendlyElec has now launched a similar, but improved product with their NanoPi R1 featuring Allwinner H3 processor coupled with 512MB or 1GB memory, two Ethernet ports, WiFi and Bluetooth connectivity, packaged in a neat metal case. NanoPi R1 specifications: SoC – Allwinner H3 quad-core Arm Cortex-A7 processor @ up to 1.2GHz with Mali-400MP2 GPU System Memory – 512MB or 1GB DDR3 RAM Storage – MicroSD Slot, optional 8GB eMMC flash Connectivity 1x Gigabit Ethernet, 1x Fast Ethernet 802.11b/g/n WiFi 4 with SMA antenna interface Bluetooth 4.0 dual mode (Classic / LE) USB – 2x USB Type-A host ports, 1x micro USB OTG port Debugging – 3-pin 2.54mm pitch header for serial console Serial […]

February 20, 2019May 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Tanix TX6 Allwinner H6 TV Box Gets Android 9.0 Firmware

The first Android 9.0 TV boxes appeared a few months ago in some Rockchip RK3328 based models, Amlogic also showcased Android 9 Pie in S905X2 / S905Y2 TV box reference platforms, but so far I don’t think I had heard about Android 9.0 for Allwinner processors. But GeekBuying and Aliexpress are now listing Wechip / Tanix TX6 Allwinner H6 TV box previously launched with Android 7.1, with Android 9.0 Pie instead for $39 and up. Here’s a reminder of Tanix TX6 hardware specifications: SoC – AllWinner H6 quad-core Arm Cortex-A53 processor up to 1.5 GHz with Mali-T720MP2 GPU System Memory – 4GB DDR3 Storage – 32GB eMMC flash, micro SD card slot up to 128GB Video Output – 1x HDMI 2.0a up to 4K @ 60hz with HDR support Audio I/F – HDMI, coaxial S/PDIF Video Playback H.265/HEVC Main/Main10 profile @ level 5.2 high-tier up to 4K @ 60fps / 6K […]