CNX Software - Embedded Systems News

December 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

MeLE Quieter4C ultrathin fanless Intel N100 mini PC supports up to three displays

MeLE has just launched a new model from its Quieter family with the Quieter4C ultrathin fanless mini PC powered by an Intel Processor N100 quad-core Alder Lake-N processor, 8GB to 16GB LPDDR4, and 128GB to 512GB eMMC+SSD storage, and supporting up to three independent 4K displays. Intel N100 mini PCs have become popular due to their excellent price/performance ratio, but although a few are fanless, many are actively cooled, and the Quieter4C differentiates itself by its low profile with the system being just 18.3 mm thick. MeLE Quieter4C specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W System Memory – 8GB or 16GB LPDDR4X Storage 128GB or 256GB eMMC flash Optional 256GB M.2 SSD (for 512GB storage in total) via M.2 2280 SATA III/PCIe Gen3 x4 socket MicroSD card reader Video […]

December 5, 2023December 4, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Robustel introduces EG5101 and EG5200 Debian 11 industrial IoT gateways with 4G LTE cellular connectivity

Robustel EG5101 EG5200 Debian 11 industrial gateways

Robustel introduced the EG5101 and EG5200 industrial IoT gateways running Debian 11 a few weeks ago, both with 4G LTE cellular connectivity, but the NXP i.MX 6ULL-based EG5101 has a more compact design, while the NXP i.MX 8M Plus-powered EG5200 provides more I/Os and resources. Expanding the earlier EG5100, EG5120, and LG5100 models from the company, the two edge computing gateways target Industry 4.0 and smart infrastructure applications and enable real-time analytics at the edge with lower latency than running workloads in the cloud. Robustel EG5101 and EG5200 SoC/Memory/Storage EG5101 NXP i.MX 6ULL Cortex-A7 32-bit processor @ 792 MHz 512MB to 1024MB DDR3 8GB eMMC flash EG5200 NXP i.MX 8M Plus quad-core Cortex-A53 64-bit processor @ 1.6 GHz with 2.3 TOPS NPU 4GB DDR4 32GB eMMC flash, microSD card socket Connectivity EG5101 1x 10/100 Mbps Ethernet port 4G LTE with 1x SMA-K antenna connector, 2x Mini SIM (2FF) EG5200 5x […]

December 4, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

nRF7002 Expansion Board adds WiFi 6 to Nordic Thingy:53 devkit

nRF7002 Expansion Board Thingy:53 devkit

Nordic Semi keeps adding more nRF7002 WiFi 6 boards with the launch of the nRF7002 Expansion Board adding WiFi 6 connectivity to the Thingy:53 IoT prototyping platform and transforming it into an all-in-one wireless devkit with Matter, Bluetooth Low Energy, Thread, and WiFi 6 support. The new “nRF7002 EB” board follows the nRF7002 DK development kit combining the nRF7002 WiFi 6 with nRF5340 multiprotocol wireless SoCs, and the nRF7002 EK evaluation kit in Arduino UNO shield form factor adding WiFi 6 to existing Nordic development kits. nRF7002 Expansion Board specifications: Chipset – nRF7002 Wi-Fi Companion IC with support for features such as OFDMA (Orthogonal Frequency Division Multiple Access), Beamforming, Target Wake Time, and SSID-based locationing Antenna – 2.4 GHz / 5 GHz ceramic antenna I/Os Castellations for all pins on nRF7002 Thingy:53 expansion connector with SPI and a 3-wire coexistence interface to allow seamless coexistence with other wireless protocols Misc […]

December 4, 2023December 4, 2023 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Orange Pi AIPro SBC features a 20 TOPS Huawei Ascend AI SoC

Orange Pi AIPro is a new single board computer for AI applications that features a new (and unnamed) Huawei Ascend AI quad-core 64-bit processor delivering up to 20 TOPS (INT8) or 8 TOPS (FP16) of AI inference performance. The SBC comes with up to 16GB LPDDR4X and a 512Mbit SPI flash but also supports other storage options such as a microSD card, an eMMC flash module, and/or an M.2 NVMe or SATA SSD. The board also features two HDMI 2.0 ports, one MIPI DSI connector, and an AV port for video output, two MIPI CSI camera interfaces, Gigabit Ethernet and WiFi 5 connectivity, a few USB ports, and a 40-pin GPIO header for expansion. Orange Pi AIPro specifications: SoC – Huawei Ascend quad-core 64-bit (I’d assume RISC-V) processor delivering up to 20 TOPS (INT8) or 8TOPS (FP16) AI performance and equipped with an unnamed 3D GPU System Memory – 8GB […]

December 4, 2023 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

PicoUART6 6x UART to USB bridge supports up to 6 Raspberry Pi 5 boards

PicoUART6 Raspberry Pi 5 UART USB bridge

PicoUART6 is a small USB to UART bridge board that takes a Raspberry Pi Pico board and exposes six UART ports to connect up to six Raspberry Pi 5 SBC’s over the new 3-pin UART connector. The Raspberry Pi 5 has created a lot of buzz since its announcement in September 2023, and people most talked about its higher performance compared to a Raspberry Pi 4 and its new (non-standard) FCP PCIe connector, but the new Raspberry Pi SBC also features a 3-pin JST UART connector that was not used in earlier and frees 3-pin on the 40-pin GPIO header. The PicoUART6 board makes use of this new connector to interface multiple Raspberry Pi 5 over UART and control them through the USB board of the Pico board. PicoUART6 specifications: Footprint for Raspberry Pi Pico board Serial – 6x 3-pin JST UART connectors Expansion – STEMMA QT/Qwiic I2C connector Debugging […]

December 4, 2023February 4, 2024 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Review of GEEKOM Mini Air12 Processor N100 mini PC – Part 1: unboxing and teardown

GEEKOM Mini Air12 is a mini PC powered by the popular Intel Processor N100 CPU and coupled with 16GB DDR5 SO-DIMM memory, a 512GB NVMe SSD upgradable up to 1TB. The Windows 11 Pro mini PC also features USB 3.2 Gen 2 USB Type-C ports, HDMI 2.0 video output, gigabit Ethernet, as well as WiFi 6 and Bluetooth 5.2 via an Azureware module. GEEKOM sent us a sample of the Mini Air12 for review. Since we’ve already written about the Mini Air12 specifications, today we will go through an unboxing and look at the hardware design with a teardown, before testing the mini PC in more detail with Windows 11 and Ubuntu 22.04 in the next parts of the review. GEEKOM Mini Air12 Unboxing We received the mini PC is a retail package that protects the device and accessories inside well. The back side of the package lists some basic […]

December 3, 2023 by Debashis Das - No Comments

OpenMV CAM RT1062 camera for machine vision is programmable with MicroPython

Following the success of the OpenMV Cam H7 and the original OpenMV VGA Camera, OpenMV recently launched the OpenMV CAM RT1062 powered by NXP’s RT1060 processor. This new camera module integrates a range of features, including a high-speed USB-C (480Mbps) interface, an accelerometer, and a LiPo connector for portability. Similar to its predecessor, this camera module also features a removable camera system, and it is built around the OV5640 image sensor which is more powerful in terms of resolution and versatility. However, the previous Omnivision OV7725 sensor, used in the OpenMV Cam H7 has a far superior frame rate and low-light performance. OpenMV provides a Generic Python Interface Library for USB and WiFi Comms and an Arduino Interface Library for I2C, SPI, CAN, and UART Comms which can be used to interface your OpenMV Cam to other systems. To program the board, you can use MicroPython 3 with OpenMV IDE, […]

December 2, 2023December 2, 2023 by Karl Johnson - 6 Comments

Genmitsu Z5-1 fiber laser engraver review

Good day. Karl here. Today I would like to share my experiences with the Genmitsu Z5-1 fiber laser engraver in this review. What is an infrared Galvo laser? A fiber laser is also known as an infrared Galvo laser. Let’s break this combination of words down. Infrared is first. Up to this point, I have reviewed several powerful blue diode lasers for the site. All of them have had 455nm wavelength lasers. In contrast, the Genmitsu Z5-1 laser we are looking at today has a 1064nm wavelength that is outside of the visible spectrum. With infrared, we can mark different materials. Notable plastics and metals are easy to mark with this laser. Galvo is next and was a term I was not familiar with. “Galvo” is a condensed form of “galvanometer.” It’s an electromechanical device used for precise mirror or optical element control in laser and optical systems. Galvanometers are […]