CNX Software - Embedded Systems News

November 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Ubuntu Touch 20.04 OTA-3 release adds support for PinePhone and PineTab devices

UBPorts has just released Ubuntu Touch 20.04 OTA-3 based on Ubuntu 20.04 LTS with the latest security updates and beta support for PinePhone, PinePhone Pro, PineTab, and PineTab 2, adding to the smartphones already supported by Ubuntu Touch 20.04 OTA-2. As a reminder, Ubuntu Touch was initially handled by Canonical for desktop/mobile convergence, but it was dropped when the company decided to refocus its efforts on cloud and IoT, and the UBPorts community took over and eventually outed the first stable Ubuntu Touch release in June 2017. The developers kept on improving the OS since then with new releases from time to time, but note that it should still be considered experimental only for most devices, and will not be suitable as a daily driver for the majority of people. The PinePhone and PineTab have been supported by Ubuntu Touch for a few years, but they had their own branch […]

November 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Gigadevice GD32VW553 RISC-V microcontroller supports WiFi 6 and Bluetooth 5.2 LE

Gigadevice GD32VW553 is a new 160MHz RISC-V microcontroller for IoT applications with support for WiFi 6 (802.11ax) and Bluetooth 5.2 Low Energy (LE) and available in QFN32 and QFN40 packages with up to 28 GPIOs. As an IoT chip, the chip supports various power modes and target wake time (TWT) for low power consumption, as well as WiFi features such as WPA3 and WiFi direct, while the radio can handle Bluetooth 5.2 LE bit rates of up to 2 Mbps and support the Long Range mode. Gigadevice GD32VW553 specifications: MCU core – 32-bit Nuclei N307 RISC-V core @ up to 160 MHz with RV32I / M / A / F / D / C / P / B instruction extensions Memory – 320KB SRAM Storage – 2048KB or 4096KB flash Wireless WiFI 6 802.11b/g/n/ax HT20 up to 114.7Mbps 802.11e QoS Enhancement (WMM). 802.11i (WPA, WPA2, WPA3). Open, shared key, and […]

November 10, 2023November 12, 2023 by Jean-Luc Aufranc (CNXSoft) - 104 Comments

Giveaway Week 2023 – WCH CH583M-R0 development board and some RISC-V microcontrollers

Early this year, WCH sent me a few of their RISC-V MCU boards and chips to thank me for writing about their products. I gave one for review with some chips but it went to review heaven, or in other words, no review was ever written. I also sold a couple locally, and since I don’t think I’ll ever have time for a review, we are now giving away the remaining boards and chips here and on CNX Software Thailand. Today’s giveaway is the WCH CH583M-R0-1v1 board, also known as CH583EVT or CH583M-EVT-R0, based on the CH583 RISC-V Bluetooth 5.3 LE microcontroller that exposes all I/Os from the chip, a few buttons, and USB ports, and also features an SWD/UART header for debugging. You’ll find the documentation, code samples, an Android app and other resources to get started on GitHub. I’ll also throw all the remaining chips I have left […]

November 10, 2023November 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Firefly ROC-RK3588-RT Rockchip RK3588(J) SBC comes with three 2.5Gbps/gigabit Ethernet ports

Firefly ROC-RK3588-RT is a Rockchip RK3588(J) SBC suitable for networking applications such as routers and firewalls thanks to one 2.5GbE port and two gigabit Ethernet ports and available in both commercial and industrial temperature grades. But the board is likely to be used for more complex workloads since it also comes with three video output interfaces (2x HDMI and USB-C DisplayPort), M.2 sockets for a SATA or NVMe SSD, a WiFi 6/Bluetooth 5.2 module, a 6 TOPS NPU embedded in the Rockchip processor, and a (non-standard) expansion connector with PCIe Gen 3 and other interfaces. Firefly ROC-RK3588-RT specifications: SoC (one or the other) Rockchip RK3588 octa-core processor with CPU – 4x Cortex‑A76 cores @ up to 2.4 GHz, 4x Cortex‑A55 core @ 1.8 GHz GPU – Arm Mali-G610 MP4 “Odin” GPU @ 1.0 GHz Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 […]

November 9, 2023November 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Libre Computer AML-A311D-CC “Alta” SBC features Amlogic A311D AI processor

Libre Computer has launched the credit card-sized “Alta” SBC, also known as AML-A311D-CC, designed for AI applications with the Amlogic A311D hexa-core Arm Cortex-A73/A53 processor equipped with a 5 TOPS AI accelerator. The board comes with 4GB LPDDR4, a 16MB SPI flash for the bootloader as well as a microSD card slot and eMMC flash module connector for storage, and offers many of the same ports as found on the Raspberry Pi 3 Model B+ with Gigabit Ethernet, four USB 3.0 ports, HDMI output, an AV jack, MIPI CSI and DSI connector, and a 40-pin GPIO header that should work with most Raspberry Pi HATs. AML-A311D-CC “Alta” specifications: SoC – Amlogic A311D CPU Hexa-core processor with 4x Arm Cortex-A73 cores @ up to 2.2 GHz and 2x Cortex A53 cores @ up to 1.8 GHz Built-in Cortex-M4 core for “always-on” processing GPU – Arm Mali-G52 MP4 GPU VPU 4K UHD […]

November 9, 2023November 11, 2023 by Jean-Luc Aufranc (CNXSoft) - 144 Comments

Giveaway Week 2023 – GL.iNet GL-S200 Thread Border Router devkit

Getting Started GL-S200 Thread Border Router

It’s already day 4 of CNX Software Giveaway Week 2023 and today, we’ll be giving away GL.iNet GL-S200 Thread Border router kit that also includes three USB or battery-powered Thread development boards to experiment with various Thread topologies. The GL-S200 router comes with a Qualcomm QCA9531 MIPS router processor running a fork of OpenWrt and provides two Fast Ethernet WAN/LAN ports, 2.4 GHz Wi-Fi 4 802.11b/g/n up to 150 Mbps, and support for Thread (via an 802.15.4 radio) and Bluetooth 5.0. The development boards are based on the Nordic Semi nRF52840 microcontroller and each features a potentiometer+button, a PIR sensor, and two RGB LEDs. I reviewed the GL-S200 Thread Border router kit using the router’s dashboard interface and demo firmware provided for the three development boards. This enabled me to test star topology and mesh networking, and play around with demo scripts and code samples to display sensor and potentiometer […]

November 9, 2023November 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

STMicro launches Bluetooth 5.3/5.4 LE STM32WB09 MCU and STM32WB1MMC wireless module

B-WB1M-WPAN1 Bluetooth 5.4 LE evaluation board

STMicro has released two new Bluetooth 5.3/5.4 products with the STM32WB09 Cortex-M0+ wireless Bluetooth 5.3 LE microcontroller and the ST32WB1MMC Cortex-M0+/M4 Bluetooth 5.4 LE module for simpler designs, as well as the B-WB1M-WPAN1 evaluation board STMicro STM32WB09 Bluetooth 5.3 LE MCU STM32WB09 highlights: MCU core – Arm Cortex-M0+ core running at 64 MHz Memory and storage – 512 KB flash memory and 64 KB RAM Wireless Bluetooth 5.3 with support for up to 2 Mbps link, long-range Tx Power – Up to +8 dBm Rx Sensitivity -97 dBm at 1 Mbps -104 dBm at 125 bps Direction finding support (AoA/AoD) Integrated balun Misc – Capacitor-less 32 MHz crystal Power consumption 3.9 mA Tx current 3.2 mA Rx current at peak 15.5 µA/MHz for the Arm Cortex-M0+ core Packages WLCSP36 (2.83 x 2.99 mm) VFQFPN32 (5×5 mm) The microcontroller integrates a balun and a 32 MHz crystal and is designed for […]

November 8, 2023November 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

MeLE Overclock4C is an ultrathin pocket-sized mini PC powered by an Intel Processor N95 CPU

Mele Overclock4C is an Intel Processor N95 Alder Lake-N mini PC with an ultrathin (21mm) design which, as its name implies, supports “overclocking”, although what it really means here is the ability to increase the PL1 and PL2 power limits in the BIOS/UEFI in order to increase performance without actually changing the top frequency of the processor… It’s the same idea and virtually the same design as the MeLE Overclock3C which boosts the TDP of the Celeron N5095 Jasper Lake processor up to 18W instead of the 15W default. Here the TDP of the Processor N95 is likely boosted up to 20 Watts (as per Intel Ark) delivering a 33% performance improvement over the Celeron N5095. The Overclock4C is available with 16GB or 32GB DDR4, a 256GB eMMC flash, and a 256GB SSD. MeLE Overclock4C specifications: SoC – Intel Processor N95 quad-core Alder Lake N-series processor @ up to 3.4 […]