Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Goophone Phone X is an iPhone X “Clone” with Fake 4G LTE, Fake Storage Capacity, and Fake Android Version

Goophone Phone X is an iPhone X “Clone” with Fake 4G LTE, Fake Storage Capacity, and Fake Android Version

Apple recently released iPhone X, but at close to $1,000 it’s not for everybody. If you want the “social status” that comes with owning the thing, but have limited budget, and/or find spending $1,000 on a phone is ridiculous, Goophone has prepared Phone X smartphone for you that externally looks like an iPhone X, and only sells for around $105 and up. It just comes with 8 or 16 GB flash, and 2G/3G connectivity, but don’t you worry losing face in front of your friends, as it has a fake 4G LTE mode, and reports 64GB flash storage. Social life saved! Goophone Phone X specifications:   SoC – Mediatek MT6580 quad core ARM Cortex A7 processor @ up to 1.3 GHz with Mali-400 GPU System Memory – 1GB RAM Storage – 8 or 16GB  (shown as fake 64GB) + micro SD slot up to 64GB Display – 5.5 ” capacitive […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Wemos LOLIN32 Lite Board Powered by ESP32 Rev 1 Chip Sells for $4.90

Wemos LOLIN32 Lite Board Powered by ESP32 Rev 1 Chip Sells for $4.90

Wemos introduced the first low cost ESP32 board with LOLIN32 board going for $6.90 plus shipping in April, but the company is now back with a new Lite version of the board switching ESP-WROOM-32 module with their own design around ESP32 Rev 1 chip (with various silicon bug fixes), and a lower $4.90 price tag to which you need to add ~$2 for shipping. Wemos LOLIN32 Lite is also smaller, so we’ll lose some of the pins (mostly extra power pins), but the I/Os look the same: SoC – Espressif ESP32-DOWD6Q Rev 1.0 dual core Tensilica Xtensa LX6 processor with WiFi and BLE Connectivity – 802.11 b/g/n WiFi + Bluetooth LE I/Os via 2x 13-pin headers with digital I/Os, analog inputs, UART, I2C, SPI, VP/VN, DAC… 3.3V I/O voltage Breadboard compatible USB – 1x micro USB port for power and programming/debugging Misc – Reset button Power – 5V via micro […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Intel Compute Card Dock DK132EPJ Specifications and User Manual Published

Intel Compute Card Dock DK132EPJ Specifications and User Manual Published

Intel unveiled the Compute Card at the very beginning of the this year, without that many details, except it would included a 7th Gen Intel Core, memory, storage and wireless connectivity, and connect compliant dock with a new standard connector featuring USB-C and extra I/Os. Later this year, we learned more details about some Apollo Lake and Kaby Lake Compute Cards including specifications and block diagram. However those cards won’t be of any use without docks, and while NexDock promised a laptop dock for the cards, I have not seen any other announcements, but we now have some info about Intel’s own Compute Card dock that looks like a mini PC as the company released technical specifications and user manuals for DK132EPJ dock, and three Compute Card SKUs.   Intel Compute Card Dock DK132EPJ specifications: CPU, Memory, Storage, Wireless – Via slot supporting certified Intel Compute Cards Video Output – HDMI and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on WizziKit is a DASH7, LoRa and Sigfox Wireless Sensor & Actuator Network Kit

WizziKit is a DASH7, LoRa and Sigfox Wireless Sensor & Actuator Network Kit

Over the last few years, I’ve written several article about LoRaWAN, Cellular IoT, and Sigfox based long range low power IoT solutions. DASH7 is another LPWAN (Low Power Wide Area Network) standard that operates on the same 868 and 915 MHz ISM bands as LoRa and Sigfox, but has much lower power consumption, and the cost of a shorter range up to 500 meters, instead of the 5+km associated with LoRa or SigFox. The DASH7 Alliance Protocol (D7A) is an Open Standard, and if you want more details you can download version 1.1 of the specifications on DASH7 Alliance website. I’m writing about DASH7 today thanks to an article on ST blog about Wizzilab’s Wizzikit, an evaluation kit and framework for DASH7 with a gateway, and several nodes that can also optionally support LoRaWAN and Sigfox protocols. The kit is comprised of the following items: WizziGate GW2120 Ethernet/Wifi/Dash7 gateway – based […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on USBCEE Tiny-PAT Board Helps Testing USB-C Power Adapters (Crowdfunding)

USBCEE Tiny-PAT Board Helps Testing USB-C Power Adapters (Crowdfunding)

USB power delivery allows for up to 100W charging using 20V @ 5A through a USB type C port, and the specifications also mandate supports for various voltages between 5V and 20V. However, some USB-C power adapter that not be fully compliant with the specifications, potentially risking to damage your device. USBCEE Tiny-PAT board has been created in order to test such power adapters to make sure they are compliant with USB PD 2.0/3.0 specifications. Tiny-PAT board features and specifications: Supported USB Spec Version – PD 2.0 / PD 3.0 Max Voltage: 24 V Max Current: 5 A Max Power: 100 W USB type C receptacle Misc – Fail and Pass LEDS, S4 mode button, through holes for VBUS & GND Power Consumption: ~10 mA (may vary based on voltage) Dimensions – 35 x 20 mm By default, the board will test all power rules advertised by the power adapter, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on IkaScope WiFi Oscilloscope Probe Works with Windows, Linux, Mac OS X, Android and iOS

IkaScope WiFi Oscilloscope Probe Works with Windows, Linux, Mac OS X, Android and iOS

Last year, I wrote about Aeroscope, a portable Bluetooth oscilloscope that looks somewhat like a Stabilo Boss highlighter pen, and sends measurements over the air directly to your Android and iOS tablet or smartphone. It was introduced through a crowdfunding campaign which eventually failed, but Aeroscope can now be purchased for $199 on Amazon US or their own website. If you’d prefer WiFi over Bluetooth, and would like something that also works on Windows, Linux, and/or Mac OS X, IKALOGIC has just launched IkaScope WiFi oscilloscope probe compatible with all popular mobile and desktop operating systems. IkaScope WS200 specifications: Analog Bandwidth  – 30 MHz @ -3dB Sample Rate – 200 MSps Connectivity – 802.11 b/g/n/e/i WiFi @ 2.4 GHz configurable as access point or station Input Range – +/-40 V range CAT1 Offset Range – +/- 20V to +/- 40V offset Input Impedance – 10MΩ || 14pF Input Contact – […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on by Jean-Luc Aufranc (CNXSoft) - 17 Comments on Factory Prices of Some TV Boxes and Accessories

Factory Prices of Some TV Boxes and Accessories

Some companies that contact me have not read the about section of the blog, and either tell me they can give me a good price for TV boxes, and some even send me their price list. And this morning, I’ve received a EXW (Ex Works) price list this of Amlogic S912/S905X/S905W and Rockchip based TV boxes, as well as some air mice, and Android projectors. The cheapest models are based on S905W and RK3229, with MXQ Pro 1GB/8GB going for $17.5 per unit for 200 pieces orders. For reference that models goes for around $26 shipped online before any discount coupon you may find. At the other end of the scale, you have TX2 model with 3GB RAM, 64GB flash going for $77.5 EXW for 200-unit orders, and sold online for $86 including shipping, again before coupon. Margin must be really low, or the prices above are not that competitive, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on SanStar WS-3A Medical Board Runs Android 5.1 on Rockchip RK3288 SoC

SanStar WS-3A Medical Board Runs Android 5.1 on Rockchip RK3288 SoC

Warp United, a “Chinese Health 2.0″/point-of-Care medical technology company based in Shenzhen, launched Warp 3 medical recorder – an Android powered handheld device supporting various  vital signs and ultrasound medical modules – earlier this year,  and the company has now just introduced SanStar WS-3A motherboard powered by Rockchip RK3288 quad core Cortex-A17 SoC, and running Android 5.1 in order to allow engineers to develop and connect their own medical modules via the various interfaces of the board, and create their own medical products. SanStar WS-3A medical motherboard specifications: SoC – Rockchip RK3288 quad core Cortex-A17 processor @ 1.8GHz with an ARM Mali-T764 GPU with support for OpenGL ES 1.1/2.0 /3.0, OpenVG1.1, OpenCL, Directx11 System Memory – 2GB or 4GB DDR3 Storage – 8GB, 16GB, or 32GB eMMC flash, micro SD slot up to 32GB Video Output / Display I/F HDMI 2.0 up to 3840 x 2160 pixel embedded DisplayPort (eDP) […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications