Posted on by Jean-Luc Aufranc (CNXSoft) - 20 Comments on Amlogic S912 Processor Specifications

Amlogic S912 Processor Specifications

Amlogic plans to launch at least three new processors for OTT boxes and set-top boxes this year: Amlogic S905X, Amlogic S912, and Amlogic S905D.  We already knew Amlogic S905 specifications, but I’ve recently received a document with some more details about Amlogic S912 revealing Mali-T820 GPU, a lack of USB 3.0 support, but still some interesting features such as HDMI 2.0a, 4K VP9, 10-bit H.265, Gigabit Ethernet Mac, and so on. Amlogic S912 specifications with highlights in bold showing differences with Amlogic S905X: CPU Sub-system –  Octa core ARM Cortex-A53 CPU up to 2 GHz (DVFS) with two CPU clusters one optimized for high performance (big) and the other for low power (LITTLE) 3D Graphics Processing Unit –ARM Mali-T820MP3 GPU up to 750MHz (DVFS) with 3 shader engines supporting OpenGL ES 1.1/2.03.1, DirectX 11 FL9_3, OpenCL 1.1/1.2 full profile and RenderScript. 2.5D Graphics Processor – Fast bitblt engine with dual […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on PULPino Open Source RISC-V MCU is Designed for IoT and Wearables

PULPino Open Source RISC-V MCU is Designed for IoT and Wearables

lowRISC is not the only open source processor project based on RISC-V instructions, as researchers at ETH Zurich university and the University of Bologna have developed PULPino open-source processor based on RISC-V instructions set, optimized for low power consumption, and targeting wearables and the IoT applications. PULPino is a single core processor derived from the PULP project (Parallel Ultra-Low-Power Platform) featuring a quad core RISC-V SoC with new RI5CY Signal Processing ISA extensions designed by the universities. The core has an IPC (instructions per cycle) close to 1, full support for the base integer instruction set (RV32I), compressed instructions (RV32C) and partial support for the multiplication instruction set extension (RV32M). PULPino also features peripherals such as I2S, I2C, SPI and UART. PULPino has already been taped out as an ASIC in UMC 65nm at the beginning of the year, but the RTL code be run on Xilinx Zynq-7010 powered Zedboard, […]

Khadas Edge2 Arm mini PC
Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on $50 Roku Streaming Stick 2016 Edition (Model 3600) Is Faster and Smaller

$50 Roku Streaming Stick 2016 Edition (Model 3600) Is Faster and Smaller

Roku has introduced a updated version of their Roku Streaming Stick with a faster quad core processor, that’s supposed to he 8 times faster than the previous model, and with more processing power than Amazon Fire TV stick and ChromeCast. The company did not release all hardware specifications, but here’s what we know: Processor – Unnamed quad core processor Video Output – HDMI with 720p or 1080p resolution Audio Output – Digital stereo over HDMI, DTS Digital Surround pass-through over HDMI Connectivity – 802.11 (a/b/g/n compatible) with WEP, WPA, and WPA2 support Power Supply- 5.0V – 1.5A USB power adapter; 3W typical power consumption when streaming HD video Dimensions –  ~8.4 x 2.03 x 1.27 cm Weight – 17 grams The device runs the latest Roku OS 7.1, and ships with a point-anywhere RF remote, two AAA batteries for the remote, a USB power cable and power adapter, and a […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on $35 Arduino MKR1000 Board is Powered by Atmel ATSAMW25 WiFi Module

$35 Arduino MKR1000 Board is Powered by Atmel ATSAMW25 WiFi Module

Arduino LLC has launched a new official Arduino board with MKR1000 board under the Arduino brand in the US, and Genuino brand in the rest of the world. The tiny board features Atmel ATSAMW25 SmartConnect module comprised of Atmel SAMD21 ARM Cortex-M0+ MCU, WINC1500 2.4GHz 802.11 b/g/n Wi-Fi chip, and ECC508 CryptoAuthentication device. MKR1000 specifications: MCU – Atmel SAMD21 Cortex-M0+ MCU @ 48 MHz with 32KB SRAM, 256 KB flash memory WiFi – 802.11b/g/n WiFi (2.4 GHz) via WINC1500 with 1×1 PCN antenna, support for SHA 256 certificates. I/Os 8x digital I/Os 12x PWM pins 1x UART, 1x SPI, 1x I2C 7x analog input pins 1x analog output pin 8x external interrupts Operating voltage – 3.3V DC Current per I/O Pin – 7 mA USB – micro USB port for power and programming Misc – RTC, power and charge LEDs Power Supply 5V only via USB or VIN pin Li-Po […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on MK808B Pro Amlogic S905 Android TV Stick Unboxing and Teardown

MK808B Pro Amlogic S905 Android TV Stick Unboxing and Teardown

MK808B Pro TV stick is the successor of the popular MK808B Plus and before that MK808B Android TV dongles with an upgrade to Amlogic S905 processor with 4K support. GeekBuying sent me a sample for evaluation, so I’ll start by checking the hardware before testing the device thoroughly in the full review. MK808B Pro Unboxing I received the stick in a package larger than I expected, but apparently about the same as the previous models (which I had not reviewed). But that’s because of the included accessories: a 5V/2A power supply, a USB cable, a mini USB OTG adapter, a mini HDMI to HDMI cable, and a user’s manual. Apart from the markings “MK808B PRO” and “4K Ultra HD”, the device looks the same as the older models. A mini USB port for power, and a USB 2.0 host port can be found on one end, with a micro SD […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Rockchip PX3 and PX4 Processors Are Designed for Automotive Infotainment & Dashboards

Rockchip PX3 and PX4 Processors Are Designed for Automotive Infotainment & Dashboards

Rockchip PX2 processor, similar to Rockchip RK3066 but targeting industrial and automotive applications, was launched in 2014. Rockchip now has at least two new member in their PX family with PX3 and PX4 specifically designed for automotive infotainment and car dashboards thanks to dual display support, at least according to one article on Elezine. Rockchip PX3 is definitely confirmed with its own page on Rockchip website, and features a quad core Cortex A9 @ 1.4 GHz with a Mali-400MP4 GPU, and while there’s no info about PX4 yet on the company website, the SoC should come with a quad core Cortex A53 processor @ 1.3 GHz with a Mali-T722 GPU, as well as HDMI 2.0 video output, and H.265 video decoding. The article also lists 7 key function of Rockchip solutions: “Quick startup and fast revert track” Navigation system with free updates HD video recording (car DVR) Advanced ADAS algorithm […]

Advertisement

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on Review of U4 Quad Hybrid Android Set-top box with DVB-T2/C and DVB-S2 Tuner

Review of U4 Quad Hybrid Android Set-top box with DVB-T2/C and DVB-S2 Tuner

U4 Quad Hybrid is an Android 4.4 satellite, cable and terrestrial TV receiver powered by HiSilicon Hi3796M V100 quad core Cortex A7 supporting video decoding for H.264 and H.265 up to 4K @ 30 Hz. I’ve already taken a few pictures of the device and the board and tuner, shown how to easily configure another device or computer to stream live TV from this Android TV box, so today, I’ll write more about the Android and DVB parts both in terms of features and performance in the full review. First Boot, Settings and First Impressions I’ve started by connecting USB peripherals and cables: USB 3.0 hard drive to USB 3.0 port, USB keyboard, and RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad, as well as Ethernet and HDMI cables, and the terrestrial and satellite antenna cables. The DVB-T2 connector is using an F-connector, so […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 20 Comments on Tiny Microwave Radar Module Detects Movements Up to 9 Meters Away for $2

Tiny Microwave Radar Module Detects Movements Up to 9 Meters Away for $2

PIR sensors are used to detect motion for example to turn on or off a light bulb when motion is detection. One such sensor is HC-SR501 motion detector, which costs around $1, and is tiny (32 x 24 mm), but not quite thin due to the design that needs to capture infrared light, with an height of around 2 centimeters. If you’d like something almost as cheap, just as small, but much thinner, microwave radar modules could be a good alternative. XYC-WB-DC is one of those modules with the following specs: Operating Frequency – 5.8 GHz Detection angle – 360° Detection range – 6-9 meters Working Voltage – 3.3-20VDC; Standby current –  <3mA; Transmit power – <2mW; Dimensions – 32 x 23 mm Operating temperature range – -20 ~ +80 Centigrade; Potential advantages over PIR sensors include wider detection angle, and lower power consumption, HC-SR501 datasheet reports respectively 120 degrees […]

Khadas VIM4 SBC