Axon Board
Posted on

The Axon platform offers WiFi & LoRa IoT messaging in a compact form factor (Crowdfunding)

Qortex (Amine Mehdi Mansouri) has developed the WiFi & LoRa IoT messaging platform to allow devices to communicate wirelessly via serial messages. The solution also includes a wireless serial port and 4 digital outputs. The tiny Axon board is based on ESP8266 WiFi SoC and can be augmented with a LoRa module for a longer range, and the solution integrates with the Axon cloud for data visualization in the cloud. There’s also a HAT expansion board for Raspberry Pi compatibility. Axon board specifications: Wireless module – ESP12-S ESP8266 2.4 GHz WiFi 4 module USB – USB Type-C port for power and programming via CP2102 Expansion – 2x 6-pin header with GPIOs, UART, 5V, 3.3V, and GND Misc – Status LED, Reset button, USB/MCU (UART) selection switch Power Supply 5V input via USB-C port 3.3V/600mA LDO PTC fuse, reverse polarity protection, ESD protection Dimensions – 30 x 25 mm The board […]

WM1302 LoRaWAN Gateway Module
Posted on

WM1302 LoRaWAN gateway mini PCIe module works over SPI or USB

Announced in 2019, Semtech SX1302 LoRa transceiver is designed for cheaper, and more efficient LoRaWAN gateways, and we’ve seen it in mini PCIe concentrator cards such as nFuse SX1302 and Rak Wireless RAK2287 using USB or SPI host interfaces. Seeed Studio adds another option with WM1302 LoRaWAN gateway mPCIe module using either SPI or USB interfaces and supporting 868 or 915 MHz frequency bands. WM1302 module specifications: MCU – STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM, 64 or 128KB flash LoRa Connectivity Semtech SX1302 LoRa Transceiver with 2x SX1250 Tx/Rx front-ends Tx power – Up to 26dBm @ 3.3V Rx sensitivity – Down to -139dBm @ SF12, BW 125 kHz; -125dBm @ 125K/SF7 LoRaWAN 1.0.2 compatible. LoRa band coverage – EU868, US915, AS923, AS920, AU915, KR920, and IN865. u.FL antenna connector Misc – Power, Config, and Tx/Rx LEDs Host Interface – SPI or USB interface on […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Zymbit HSM4
Posted on

Zymbit HSM4 & HSM6 security modules work with embedded Linux hardware, Raspberry Pi, Jetson Nano

Zymbit Zymkey security modules, now called Zymkey4i, were first introduced several years ago. Based on the Microchip ATECC508A CryptoAuthentication chip, the modules were available as a USB stick, an I2C module for Raspberry Pi boards, or an SMT component, and designed to enable multifactor device ID & authentication, data encryption & signing, key storage & generation, and physical tamper detection. The company has now informed CNX Software they had launched HSM4 cryptographic protection module and HSM6 hardware wallet with a different form factor for easy integration into embedded applications, and devkits compatible with Jetson Nano and Raspberry Pi SBCs. Zymbit HSM4 cryptographic protection module & devkit HSM4 crypto module key features and specifications: HSM4 is built upon Zymkey4i module, and integrates an Arm Cortex-M0 microcontroller, as well as a secure element likely to be Microchip ATECC508A, or the more recent ATECC608B CryptoAuthentication chip if the company upgrade System Identity & […]

Flow Browser Raspberry Pi Optimized web browser
Posted on

Flow Browser, a Raspberry Pi optimized web browser for HMI

Most people will use Chromium on Raspberry Pi boards simply because it’s now the default browser in Raspberry Pi OS. But the performance may not be optimal, and UK-based Ekioh has developed the Flow Browser optimized for performance on Raspberry Pi with multi-thread support and 3D accelerated graphics. There’s a caveat though, as the Flow Browser has been developed from the ground up, i.e. not based on Webkit or Mozilla Engine, with human-machine interfaces (HMI) in mind, rather than individuals browsing the web, and that means that while performance will be better, site compatibility does suffer at this point in time. Key features in Flow Browser Before going into benchmarks and other tests, let’s check some of the key features listed for Flow Browser: HTML & CSS3CSS – Animations and Transitions, CSS Transforms (2D and 3D), CSS Flexbox, Bi-directional text layout Graphics – Web Fonts – Canvas, SVG & WebGL […]

Onlogic Raspberry-Pi CM4 mini PC Dual GbE
Posted on

Onlogic industrial Raspberry Pi CM4 based mini PC to offer dual GbE, USB 3.1, M.2 SATA socket

Yesterday, we covered two Raspberry Pi CM4 carrier boards with dual Ethernet ports, including one from Seeed Studio with dual Gigabit Ethernet and USB 3.1 ports, and another from MCUZone with Gigabit + Fast Ethernet ports, USB 2.0 ports, plus a 4G LTE modem. But Onlogic will soon add another option with a complete Raspberry Pi CM4 based industrial mini PC with dual Gigabit Ethernet, teased as “One Tough Pi”, as well as USB 3.2/2.0 ports, M.2 SATA storage, and more. Onlogic “One Tough Pi” mini PC preliminary specifications: SoM – Raspberry Pi CM4 module with  up to 8 GB LPDDR4 memory, 32 GB eMMC flash storage Storage –  M.2 2280 SATA SSD support Video & audio output – 1x Micro HDMI port up to 4Kp60 Connectivity – 2x Gigabit Ethernet ports USB – 3x USB ports include 1x USB 3.2 Gen 1 port, and 2x USB 2.0 ports; 1x […]

Geniatech XPI-3288 SBC
Posted on

Geniatech XPI-3288 Raspberry Pi lookalike features Rockchip RK3288 SoC

Geniatech XPI is a family of single board computers following Raspberry Pi 3 form factor. We first covered XPI-S905X SBC in 2018, which was followed by XPI 3128 board last year. The company has now launched another model with Geniatech XPI-3288 SBC powered by Rockchip RK3288 32-bit quad-core Cortex-A17 processor coupled with 2G RAM and 16GB eMMC flash. Geniatech XPI-3288 specifications: SoC – Rockchip RK3288 quad-core Cortex-A17 processor @ up to 1.6GHz with Arm Mali-T764 GPU System Memory – 2GB RAM Storage – 16GB eMMC flash (8/32GB optional), MicroSD card slot Video Output – HDMI up to 4Kp60 (may be limited to 4Kp30 on  some older 4K TVs) Video decoding H.264 up to HP level 5.1 @ 2160p24 (3840×2160) MPEG-1/-2/-4, AVS, VP8, MVC up to 1080p60 (1920×1080) VC-1 up to AP level 3 @ 1080p30 (1920×1080) H.263 @ 576p60 (720×576) Connectivity Gigabit Ethernet port Optional dual-band 802.11b/g/n/ac WiFi 5 and […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Raspberry Pi RP2040 HDMI
Posted on

Raspberry Pi RP2040 boards are coming with… HDMI?

We’ve already seen Raspberry Pi RP2040 MCU can support VGA output using the microcontroller’s programmable I/O blocks.  But yesterday, I saw two upcoming RP2040 boards with an HDMI connector. How is that supposed to work? The first one is Olimex RP2040-PICO-PC that’s indeed like a pico PC board with an HDMI connector for video, a micro SD card for storage, a standard 3.5mm audio jack for speaker or headphone, and a USB host for a keyboard. RP2040-PICO-PC teaser small PC with RP2040-PICO module. Video, Audio, SD-card, UEXT, I2C, Lipo battery, Reset, USB pwr, USB host for keyboard, Debug TxRx, SWD for JTAG debug #rp2040 #raspberrypi #circuitpython #retrogames pic.twitter.com/str79xsMkm — OLIMEX Ltd (@Olimex) March 1, 2021 There are some I/O headers for good measure, what looks like a 3-pin UART console header, a 2-pin header for LiPo battery, as well as a reset button. The second board, dcelectr DC2040, follows the […]

Raspberry Pi Pico Reset Button Soldered
Posted on

A neat way to add a reset button to Raspberry Pi Pico

The Raspberry Pi Pico is a nice little board, but if you program in C language, you’d need to disconnect the micro USB cable each time you’d like to flash the UF2 firmware. That’s not convenient and could damage your board over time.  The Raspberry Pi Foundation even decided to write a blog post explaining how to add a reset button to your Raspberry Pi Pico using a breadboard circuit. Here’s what it looks like. That works but you may want to use that breadboard for another circuit, so the reset button takes space. Another solution is to program with a Raspberry Pi board and use SWD mode to upload code using the debug port, instead of using mass storage (BOOTSEL) mode. I’ve also found out that most baseboards for the Pico board will include a reset button. But this morning, I’ve come across another solution that looks pretty neat. […]

Boardcon LGA3576 Rockchip RK3576 System-on-Module designed for AI and IoT applications