eModGate X0 ESP32 industrial IoT controller
Posted on

eModGATE Moduino X0 – An ESP32-based industrial IoT controller with battery support

TECHBASE eModGATE Moduino X0 is an industrial IoT control based on a choice of ESP32 modules from Espressif and Pycom, equipped with a battery slot for remote installations, and various interfaces to connect sensors or actuators via RS232, RS485, and/or digital I/Os. We first wrote about TECHBASE Moduino-X series ESP32 IoT endpoints almost six years ago with the X1 and X2 models, but since then the company has added more models such as the large X3 and X4 devices with more I/Os, and the new entry-level Moduino X0 that’s similar to the X1, but with battery support instead of a supercapacitor. eModGATE Moduino X0 specifications: ESP32 wireless module/board options ESP32-WROVER with ESP32 dual-core Tensilica LX6 processor @ 240 MHz, 8MB PSRAM, 4MB or 16MB SPI flash Pycom WiPy 3.0 with 4MB RAM, 8MB Flash Pycom SiPy with 512kB RAM, 4MB Flash, Sigfox Pycom LoPy with 4MB RAM, 8MB Flash, Wi-Fi/BT4.2, […]

CrowView 14 inch laptop monitor extender
Posted on

CrowView adds a 14-inch portable monitor to your laptop for $115 and up (Crowdfunding)

Elecrow CrowView is a lightweight 14-inch portable monitor designed to be attached to your laptop adding a secondary monitor to it through a clamping structure that works with laptops having a 13-inch to 16.5-inch display. We’ve seen this type of laptop monitor extension for years, and you’ll find various models on Amazon. But the Elecrow is now offering the CrowView at a significantly lower price than competitors especially if you pledge $114.90 for the super early bird reward on Kickstarter. The regular price ($179) can still be interesting as in this price range you’d usually get an 11-inch or 12-inch display. CrowView specifications: 14-inch IPS display with 1920×1080 resolution, 60 Hz refresh rate, 400 nit brightness Compatible with 13-inch to 16.5-inch laptops with 4 to 8mm thick displays thanks to a telescopic snap 230° hinge enabling face-to-face mode. Ports Mini HDMI port for video input 2x full-featured USB Type-C port […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Raspberry Pi CM4 stock August 1
Posted on

Raspberry Pi supplies are improving, but trust may be hard to rebuild with makers

Last December, Eben Upon provided an update about Raspberry Pi availability and expected “unlimited supplied” by H2 2023. Nine months later, Raspberry Pi supplies have indeed improved a lot. Still, some makers with small-volume production have already moved on, and are using alternative solutions. This seems especially true for products based on Raspberry Pi CM4 modules. Tom’s Hardware has just had a fresh look at the Raspberry Pi supply situation, and based on Eben’s tweets noted an increased number of Raspberry Pi boards had shipped in 2023. Eben said June was the second-best month ever for Raspberry Pi Trading with 788,000 units sold, and July looks to breach if the one million units a month is reached, beating the March 2021 records of 814k units. He further expanded saying 119k Zero boards, of which 33k Zero 2 boards (almost entirely consumer), and estimated around 250-400ku went to the retail market. […]

Ubuntu Smartphone with physical keyboard
Posted on

Ubuntu Touch 20.04 OTA-2 adds support for Fairphone 3, Volla Phone X23, F(x)tec Pro1 X smartphones

UBPorts has just released Ubuntu Touch 20.04 OTA-2 based on Ubuntu 20.04 with three new phones supported namely the Fairphone 3, the Volla Phone X23, and F(x)tec Pro1 X with the latter being introduced in 2020 in a crowdfunding campaign claiming Ubuntu Touch support. Ubuntu Touch was initially an initiative by Canonical for desktop/mobile convergence, but when the company decided to refocus its efforts on cloud and IoT, the UBPorts community took over and eventually outed the first stable Ubuntu Touch release in June 2017. Work has continued since then and with the Ubuntu Touch 20.04 OTA-2 release, the community-supported distribution now supports 15 smartphones with the Fairphone 4, Google Pixel 3a and 3a XL, Oneplus 5 and 5T, OnePlus 6 and 6T, Vollaphone and Vollaphone X, Vollaphone 22, Xiaomi Mi A2, Xiaomi Poco M3, Xiaomi Redmi Note 7 and 7 Pro, besides the three new mobile devices added to […]

Robo Pico Review Raspberry Pi Zero W robot
Posted on

Robo Pico review – A Raspberry Pi Pico W-based motor & sensor control board tested with BocoBot robotic kit

Cytron Robo Pico is a carrier board for the Raspberry Pi Pico (W) specially designed for robotics & IoT applications with a 2-channel DC motor driver, four servo motor ports, and seven Grove I/O connectors to connect various sensors and/or actuators. When the company asked us to review the Robo Pico board, I noticed they had a car robotic kit based on the board called the BocoBot that comes with installation videos and five tutorials including obstacle avoidance movement with ultrasonic sensors, light search, line following, and WiFi remote control. So I asked for the full kit to make the review more fun and interesting. Robo Pico board Robo Pico specifications: Supported MCU board – Raspberry Pi Pico/Pico W and compatible Motor control 2x DC Motor terminals with Motor status LEDs for each motor terminal 2x motor test buttons for each motor terminal Header to connect to 4x servos Expansion […]

ESP32-S3 Linux 6.3
Posted on

12 Euros ESP32-S3-DevKit-LiPo board runs Linux 6.3

Olimex ESP32-S3-DevKit-LiPo is a new open-source hardware ESP32-S3 board with 8MB flash, 8MB PSRAM, as well as LiPo battery and JTAG support that can run Linux 6.3, or the more traditional Arduino or MicroPython firmware. The board is based on the ESP32-S3-WROOM-1-N8R8 module, features two USB-C ports for power, programming, and JTAG debugging, plenty of expansion with two rows of I/Os plus a pUEXT connector, Reset and Boot buttons, and a couple of LEDs. ESP32-S3-DevKit-LiPo specifications: Wireless module – Espressif ESP32-S3-WROOM-1-N8R8 with SoC – ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learning, WiFi 4 & Bluetooth 5 LE/Mesh Memory – 8MB OSPI PSRAM Storage – 8MB QSPI flash PCB antenna Dimensions – 25.5 x 18.0 x 3.1 mm USB 1x USB Type-C OTG port also used for JTAG/Serial 1x USB Type-C port for USB-serial programming and power Expansion 2x 22-pin GPIO headers pUEXT […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Turing RK1 RK3588 SoM
Posted on

Turing RK1 RK3588 system-on-module for cluster boards is now available (for pre-order)

Turing Pi has been making mini-ITX cluster boards for Raspberry Pi CM4 and NVIDIA Jetson modules for over four years, but last year, the company teased their own Turing RK1 system-on-module based on a powerful Rockchip RK3588 Arm processor with 6 TOPS NPU while launching the Turing Pi 2 cluster board on Kickstarter and raising over 2 million dollars in the process. The Turing RK1 is now available for pre-order with the 8GB RAM going for $130, the 16GB model for $170, and you’d have to spend $260 if you need 32GB RAM. Most people will probably want to add $10 to purchase the RK1 heatsink with a built-in fan as well. Pre-orders are expected to start shipping on October 27. Turing RK1 specifications: SoC – Rockchip RK3588 CPU – Octa-core processor with 4x Arm Cortex-A76 @ 2.4 GHz, 4x Arm Cortex-A55 @ 1.8 GHz GPU – Arm Mali-G610 MP4 […]

Youyeetoo X1 SBC
Posted on

Youyeetoo X1 – A Compact Intel Jasper Lake SBC going for $110 and up

Youyeetoo X1 is a compact Intel Celeron N5105 Jasper Lake SBC with up to 16GB RAM, optional eMMC flash of up to 256GB capacity, support for an M.2 NVMe or SATA SSD,  up to three video outputs, Gigabit Ethernet, and optional WiFi and Bluetooth or 4G LTE connectivity. In some ways, it reminds me of the Zimaboard, but the X1 SBC comes with an 11th Gen Jasper Lake processor instead of a 7th Gen Apollo Lake processor, it’s cooled with a fan and heatsink instead of being fanless and does offer more I/Os. Youteetoo X1 specifications: SoC – Intel Celeron N5105 quad-core Jasper Lake processor @ 2.0 GHz / 2.9GHz (Turbo), with Intel UHD Graphics @ up  to 800MHz; TDP: 10W System Memory – 4GB, 8GB, or 16GB LPDDR4 Storage Optional eMMC flash with 64GB, 128GB, or 256GB capacity M.2 Key-M socket for M.2 2280 NVMe or SATA SSD SATA […]

Boardcon LGA3576 Rockchip RK3576 System-on-Module designed for AI and IoT applications