100ask T113-S3 board
Posted on

100ASK-T113-Pro Allwinner T113-S3 industrial board, and Allwinner T113-S4 with 256MB DDR3

Last year, Jean-Luc introduced the T113-S3 processor and the small MangoPi-Dual board with T113-S3. This time, I will introduce a development board with relatively rich resources, the 100ASK-T113-PRO, which consists of a core board with T113-S3 and a carrier board with a large number of peripheral interfaces, and the upcoming Allwinner T113-S4 SoC with 256MB DDR3. 100ASK-T113-Pro Allwinner T113-S3 industrial board While the T113-S3 and D1s/F133 RISC-V processors are pin-to-pin compatible, the T113-S3 is a dual-core Arm Cortex-A7 processor with HiFi4 DSP, CAN interfaces added (CAN is not mentioned publicly, but can be seen in the T113-S3 Datasheet) and 128MB DDR3 on-chip memory.   100ASK-T113-PRO preliminary specifications: T113-S3 Core Lite: SoC – Allwinner T113-S3 CPU – Dual-core Arm Cortex-A7 with 32 KB L1 I-cache + 32 KB L1 D-cache per core, and 256 KB L2 cache DSP – Single-core HiFi4 Memory – 128 MB DDR3 (SIP) Storage – 16MB SPI NandFlash […]

mini PCIe card 4x CAN FD
Posted on

Half-size mini PCIe card adds up to 4 CAN FD interfaces to embedded systems

esd electronics CAN-PCIeMiniHS/402 is a half-size mini PCIe card with four CAN FD Interfaces designed for embedded systems with one model adding extended temperature range support from -40C to 85°C. The company also introduced the CAN-Mini/402-4-DSUB9-150mm adapter to more easily connect the four CAN network interfaces via DSUB9 connectors. It comes with four individual small adapter boards, each equipped with a DSUB9 plug and a jumper for selectable onboard CAN termination, as well as 150 mm long wires. CAN-PCIeMiniHS/402 highlights: 4x CAN FD interfaces according to ISO 11898-2, no galvanic isolation, bit rates from 10 Kbit/s up to 8 Mbit/s Bus mastering and local data management by FPGA (Intel Cyclone IV EP4CGX) PCIe Mini interface according to Mini Card Electromechanical Spec. R1.2 Supports MSI (Message Signaled Interrupts) HW-Timestamp capable Dimensions – 30 mm x 27 mm (Half-size mini PCIe form factor) Temperature Range Standard – 0°C … +75°C Extended range: […]

Orange Pi 5B
Posted on

Orange Pi 5B SBC adds up to 256GB eMMC flash, built-in WiFi 6 and Bluetooth 5.0 module

Orange Pi 5B is a variant of the Rockchip RK3588S powered Orange Pi 5 SBC with up to 256GB eMMC flash and a soldered-on wireless module offering WiFi 6 and Bluetooth 5.0 connectivity, at the cost of losing the M.2 2242 socket and 16MB QSPI NOR flash found in the original board. The board still comes with HDMI 2.1, DisplayPort 1.4 (USB-C), and MIPI DSI display connectors, three camera connectors, a Gigabit Ethernet interface, a few USB ports, and a 26-pin GPIO header for expansion. Orange Pi 5B specifications with the new features highlighted in bold, and the missing ones as strikethrough text: SoC – Rockchip RK3588S octa-core processor with 4x Cortex-A76 cores @ up to 2.4 GHz, 4x Cortex-A55 cores @ up to 1.8 GHz, Arm Mali-G610 MP4 GPU, 6 TOPS AI accelerator System Memory – 4GB, 8GB, or 16GB LPDDR4/4x (32GB RAM is also listed, but not for […]

NVIDIA Jetson Orin Nano Developer Kit
Posted on

$499 NVIDIA Jetson Orin Nano Developer Kit delivers up to 80x Jetson Nano Devkit performance

NVIDIA Jetson Orin Nano Developer Kit is an upgrade to the popular Jetson Nano Developer Kit that delivers 80 times the performance, up to 50 times the performance per watt, and gives the developers the ability to design entry-level AI-powered robots, smart drones, intelligent vision systems, and more. The Jetson Orin Nano has a similar form factor as the original Jetson Nano, but is fitted with a Jetson Orin Nano 8GB module with up to 40 TOPS AI performance, and is equipped with a DisplayPort video output, USB 3.2 Gen 2 ports, two M.2 Key M sockets for SSDs, Gigabit Ethernet, a pre-installed Wi-Fi module, and connectors for cameras. NVIDIA Jetson Orin Nano Developer Kit specifications (compared to Jetson Nano Developer Kit-B01) The new developer kit is supported by the Ubuntu 20.04-based NVIDIA JetPack 5.1.1 SDK, as well as application-specific frameworks such as NVIDIA Isaac ROS and DeepStream, which are […]

Qualcomm Robotics RB1 RB2 Vision Kit
Posted on

Qualcomm Robotics RB1 and RB2 development kits launched for $199 and up

We quickly mentioned the Qualcomm Robotics RB1 and RB2 development kits in our post about Lantronix Open-Q 2210RB and 4210RB SiPs mostly to complain about the lack of information at the time. But things have changed the Qualcomm Robotics RB1 and RB2 devkits for cheaper, smaller Linux-powered robots with lower power consumption are now available, and we have more details with three options: Core Kit, Vision Kit, and Full Kit. So let’s have a closer look. All kits are based on the Qualcomm Robotics RB1/RB2 Core Kit with the following (preliminary) specifications: System-on-module RB1 –  Thundercomm TurboX C2210 SoC – Qualcomm QRB2210 CPU – Quad-core Cortex-A53 processor at up to 2.0 GHz GPU – Adreno 702 GPU at 845 MHz with support for OpenGL ES 3.1, Vulkan 1.1, OpenCL 2.0 Hexagon QDSP6 v66 DSP 1080p 30 fps encode / 1080p 30fps decode System Memory – 1GB or 2GB LPDDR4 Storage […]

GL-S200 Thread Border Router review with Thread Dev Boards
Posted on

A first look at GL.iNet GL-S200 Thread Border Router kit with three nRF52840 Thread boards

GL.iNet are better known for their routers, but the company is also offering IoT gateways and Smart Home hubs such as the GL-S10 BLE to MQTT IoT gateway. The company is now preparing to launch the GL.iNet GL-S200 Thread Border Router in early April, and I’ve been asked to do some beta testing before launch, so GL.iNet have sent me a kit with the GL-S200 and three Thread development boards acting as IoT nodes. A Thread Border Router acts as a WiFi or/and Ethernet gateway connecting to battery-powered Thread sensor nodes equipped with a low-power 802.15.4 radio. In this first post, I’ll go through the hardware and specifications, before reporting my finding in a separate post next week. GL-200 Thread Border Router kit unboxing and specifications The development boards are all identical and they were each kept in an antistatic bag. But let’s open the GL-S200 package first. The Thread […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
MSPM0L Block Diagram
Posted on

Texas Instruments MSPM0 Arm Cortex-M0+ microcontrollers sell for 39 cents and up

Texas Instruments has just introduced its low-cost MSPM0 Arm Cortex-M0+ microcontroller portfolio comprised of the MSPM0L series with a 32 MHz CPU, up to 64 kB of flash, and 4 kB SRAM, and the MSPM0G series with an 80 MHz CPU, up to 128 kB of flash and 32 kB SRAM. Texas Instruments MSPM0L MSPM0L1306 key features: CPU – Arm 32-bit Cortex-M0+ core @ up to 32 MHz Memory – Up to 4KB SRAM Storage – Up to 64KB flash Digital peripherals 3-channel DMA controller 4x 16-bit general-purpose timers, each with two capture/compare registers supporting low-power operation in STANDBY mode, supporting a total of 8 PWM channels Windowed watchdog timer Analog peripherals 12-bit 1.45-Msps analog-to-digital converter (ADC) with up to 10 total external channels Configurable 1.4-V or 2.5-V internal ADC voltage reference (VREF) 2x zero-drift, zero-crossover chopper operational amplifiers (OPA) 1x general-purpose amplifier (GPAMP) 1x high-speed comparator (COMP) with 8-bit […]

Radxa ROCK 3C
Posted on

ROCK 3C SBC – A $39+ Raspberry Pi 3 lookalike with Rockchip RK3566-T AI SoC, M.2 NVMe SSD support

Radxa ROCK 3C, also called ROCK 3 Model C, is a Rockchip RK3566-T Arm SBC with up to 8GB RAM and WiFi 5. It mostly follows the Raspberry Pi 3 Model B form factor, but also adds an M.2 PCIe socket for NVMe SSDs. The single board computer also comes with a MicroSD card slot and eMMC flash module socket to boot the OS, a 4Kp60 capable HDMI 2.0 port, a MIPI DSI connector, a MIPI CSI camera connector, a 3.5mm jack with microphone, four USB ports, Gigabit Ethernet, and a 40-pin color-coded GPIO header. ROCK 3C specifications: SoC – Rockchip RK3566-T quad-core Cortex-A55 processor @ 1.6 GHz with Arm Mali-G52 GPU, 0.8 TOPS NPU (AI accelerator) System Memory – 1GB, 2GB, 4GB, or 8GB LPDDR4 2112MT/s Storage MicroSD card slot eMMC module socket M.2 Key-M PCIe socket for 2230 NVMe SSD Video Output HDMI 2.0 up to 4Kp60 2-lane […]

Boardcon LGA3576 Rockchip RK3576 System-on-Module designed for AI and IoT applications