You searched for up board - Page 182 of 1039 - CNX Software

IZIRUNF7 STM32F7 MCU board with M.2 socket

June 9, 2021

IZIRUN open-hardware STM32 development boards expose GPIOs through M.2 connector (Crowdfunding)

M.2 sockets are typically used to connect wireless or storage expansion boards to laptops, computers, and SBC’s. But nothing precludes them from being used for another purpose, and earlier this year we wrote about Sparkfun MicroMod MCU boards with an M.2 connector for GPIOs, I2C, SPI, etc… IZITRON has expanded the concept with three slightly larger (IZIRUN) STM32 boards routing more IOs to the M.2 connector, and additional features such as built-in EEPROM and buttons. IZIGOBOARD carrier board is then used to host the STM32F0, STM32F4, or STM32F7 board in order to ease development. IZIRUN STM32 development boards IZIRUN boards specifications: Microcontroller IZIRUNF0 – STMicro STM32F030CCT6 Cortex-M0 MCU @ 48 MHz with 256KB flash, 32 KB SRAM IZIRUNF4 – STMicro STM32F407VET6 Cortex-M4 MCU @ 168 MHz with 512KB flash, 192KB SRAM IZIRUNF7 – STMicro STM32F769NIH6 Cortex-M7 MCU @ 216 MHz with 2MB KB flash, 532KB SRAM On-board RAM – IZIRUNF7 […]

June 8, 2021

Aetina DeviceEdge Mini Edge AI computers support NVIDIA Jetson SO-DIMM modules

NVIDIA Jetson modules offer a wide range of AI performance starting from the entry-level 492 GFLOPS Jetson Nano module up to the 32 TOPS Jetson AGX Xavier platform. That’s probably Aetina decided to offer its DeviceEdge Mini AI edge solution with either Jetson Xavier NX, Jetson Nano, or Jetson TX2 NX pin-compatible SO-DIMM modules designed for applications in smart transportation, factories, retail, healthcare, AIoT, robotics, etc… The three models M1, M2, and M3 can all take the Jetson modules listed above, and come in a very similar form factor with the following key features: Common features: Storage – 128GB M.2 NVMe SSD (default) Video Output – Micro HDMI 1.4 connector Networking – Gigabit Ethernet RJ45 port, optional WiFi/Bluetooth M.2 module USB – 1x USB Type-C OTG only port Expansion 1x M.2 2242 M-key socket fitted with NVMe SSD 1x M.2 2230 E-key socket for optional Wifi/BT function 1x DB15 male […]

Graperain Samsung, Rockchip RK3588, and Qualcomm CPU modules, SBCs, and carrier boards

June 7, 2021

Keyboard also serves as USB-C hub with 11 ports from audio jack to VGA

I’m not sure who needs this, but if you’d like a USB-C hub with a QWERTY keyboard and a good variety of ports, you’ll be glad QGeeM Keyboard and USB-C hub/dock station exists. The device comes with one HDMI port, one VGA D-Sub connector, 3x USB 3.0 ports, a memory card reader, an RJ45 port for Ethernet, an audio jack, and USB-C port with USB-C PD 3.0 support up to 100W. This may look like a keyboard PC, but nope, it’s just a USB-C hub that happens to have a built-in keyboard. QGeeM Keyboard and USB-C hub key features: Storage – MicroSD and full-size SD/SDXC card readers (multiplexed) up to 2TB Video Output HDMI 1.4 port up to 4Kp30, VGA D-Sub connector up to 1920×1080 @ 60 Hz Dual display setups up to 1080p60 per display Mirroring and extended display modes supported Audio -3.5mm audio AUX jack Networking – Gigabit […]

June 5, 2021

3D printer board leverages Allwinner A64’s AR100 core for real-time control

Elias Bakken has been working on Recore 3D printer control board based on Allwinner A64 processor since 2019 and with revision “A5” of the PCB, Recore is now considered stable and will ship to customers. But wait? Isn’t Allwinner A64 just a quad-core Cortex-A53 processor meant to run Linux? But 3D printer control boards require real-time I/O and that’s why many are designed with STM32, Arduino compatible Microchip MCU or other microcontrollers. The trick here is that Elias did not use the Cortex-A53 cores for real-time control, but instead the 300 MHz AR100 32-bit OpenRISC 1000 core found in Allwinner A64 SoC. Recore specifications: SoC – Allwinner A64 quad-core Cortex-A53 processor running at 1 GHz, with AR100 32-bit core @ 300 MHz, Mali-400MP2 GPU System Memory – 1 GB DDR3 RAM Storage – 8 GB eMMC flash Video Output – HDMI output to connect a display Networking – Gigabit Ethernet […]

AMD Ryzen Embedded V2000 mini-ITX motherboard

June 4, 2021June 4, 2021

Ryzen Embedded V2000 mini-ITX industrial motherboard offers four DP++ video ports

DFI RNO171 is a mini-ITX industrial motherboard powered by an AMD Ryzen Embedded V2000 processor with up to 64GB RAM, two SATA ports, four DisplayPort++ video outputs, and plenty of I/Os including dual GbE, a PCIe x16 expansion slot, multiple USB and serial ports, and more. DFI RNO171 mini-ITX SBC specifications: SoC – AMD Ryzen V2000 Series Processors either: AMD Ryzen Embedded V2748, 8C/16T up to 2.9GHz (4.25GHz) with 4MB cache, 7 CU Radeon Vega graphics; 45W TDP AMD Ryzen Embedded V2546, 6C/12T up to 3.0GHz (3.95GHz), with 3MB cache, 6 CU Radeon Vega graphics; 45W TDP AMD Ryzen Embedded V2718, 8C/16T up to 1.7GHz (4.15GHz), with 4MB cache, 7 CU Radeon Vega graphics; 15W TDP AMD Ryzen Embedded V2516, 6C/12T up to 2.1GHz (3.95GHz), with 3MB cache, 6 CU Radeon Vega graphics; 15W TDP System Memory – Up to 64GB dual-channel DDR4 (ECC/non-ECC) via 2x 260-pin SODIMM sockets Storage […]

June 4, 2021June 4, 2021

TQ unveils i.MX 8M Plus LGA module and evaluation single board computer

We’ve seen plenty of systems-on-module based on NXP i.MX 8M Plus AI processor announced at Embedded World 2021 either with edge or board-to-board connectors. TQ TQMa8MPxL is a bit different as an i.MX 8M Plus LGA (Land Grid Array) system-on-module meant to be soldered on a carrier board. The company also took the occasion to unveil STKa8MPxL evaluation kit based on TQMa8MxML in single board computer format to demonstrate its new LGA module. TQMa8MPxL i.MX 8M Plus LGA module Specifications: SoC – NXP i.MX 8M Plus “Quad 8 ML/AI”, “Quad 6 Video”, or “Quad 4 Lite” processor with four Cortex-A53 cores, one Cortex-M7 core, Vivante GPU, video encoder/decoder, HiFi4 audio DSP, and 2.3 TOPS AI accelertor System Memory – Up to 4 GB LPDDR4 Storage – Up to 256 MB (MBytes)Quad SPI NOR flash, up to 256 GB eMMC flash, optional EEPROM up to 64 Kbit 362-pin LGA with Storage […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

Intel QuickSync & Intel Gaussian-and Neural Accelerator 2.0

May 31, 2021

Intel Core i7-1195G7 Tiger Lake mobile processor reaches up to 5 GHz

Intel introduced the Tiger Lake family of processors last September with the 7-15W UP4-Series SoCs, and the more powerful 12-28W UP3-Series processors. The company has announced two new Tiger Lake processors at Computex 2021 with the Core i5-1155G7 and Core i7-1195G7 U-Series with the latter reaching up to 5.0 GHz with Intel Turbo Boost on a single core to compete and in some cases outperform AMD Ryzen 5000-series mobile processors. While reaching 5GHz on a 28W processor is a nice milestone, nothing much has changed as we can see from the table above, except for tweaks in the CPU and GPU frequency. The base frequency has actually been slightly lowered in the new part, but the Turbo frequencies for single-core and all cores have been increased. Intel did share some performance slides comparing a Core i7-1195G7 system to one with AMD Ryzen 7 5800U. The first slide shows casual gaming […]

May 27, 2021June 4, 2022

CatsPi Industrial Lite RPi CM4 carrier board features GbE, RS485, Watchdog MCU

We’ve seen a fair deal of Raspberry Pi CM4 carrier boards, and here’s another one courtesy of QwaveSystems with CatsPi Industrial Lite board following Raspberry Pi SBC form factor/dimensions, and equipped with Gigabit Ethernet, RS485, USB ports, as well as a watchdog MCU among other interfaces and features. Contrary to what the name implies, CatsPi Industrial Lite only works with Raspberry Pi CM4 with eMMC flash, but not the CM4 Lite module since there’s no MicroSD card on the baseboard. It’s not the first Raspberry Pi Compute Module 4 carrier board with RS485, however, as we previously covered CM Hunter also including CAN and 1-wire interfaces, but QwaveSystems’ solution is more compact and mostly mechanically compatible with Raspberry Pi model B SBC’s. CatsPi Industrial Lite board specifications: Compatible SoMs – Raspberry Pi CM4 with eMMC flash only Video Output – Micro HDMI port Connectivity – Gigabit Ethernet, optional 802.11b/g/n/ac WiFi […]