Easy and Safe Way to Try Linux on Popular Rockchip RK3188 mini PCs

Until recently, installing Linux on Rockchip R3188 based TV boxes or HDMI TV dongles meant you had to flash one or more binaries to your device using various type of tools for Linux or Windows. But thanks to various members of the community, it’s now as easy as flashing an image for the Raspberry Pi, as long as you own Minix Neo X7, PQ Labs iStick A350-SSD, Radxa Rock development board, or Rikomagic MK802IV (AP6210 or 8188EU Wi-Fi module versions) thanks to images provided by Ian Morrison on G+ mini PC community that can be booted from a (micro) SD card, which the added advantage that it won’t mess with your Android installation. You can do it whether you use a Windows or Linux PC, and it should also be possible on Mac OS X, but I don’t know the commands. Here are the steps to follow for MINIX NEO X7, other products will have the same procedure, only the …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

PQ Labs iStick A350-SSD is a Quad Core HDMI TV Stick with an mSATA Connector and a Battery

Since there are now so many quad core HDMI TV Sticks and TV Boxes, it would be easy to discount PQ Labs iStick A350-SSD as yet another Android TV devices powered by Rockchip RK3188 SoC, were it not for its mSATA connector and included battery. The company has also managed to add 3 USB ports, and a micro USB port, in a form factor only slightly bigger than a standard HDMI TV dongle. iStick A350-SSD specifications: SoC – Rockchip RK3188  quad-core Cortex A9 @ 1.6GHz with Mali-400MP4 GPU System Memory – 2GB DDR3 Storage – 4 GB NAND Flash, mSATA connector, micro SD slot Video & Audio Output – HDMI, audio jack Connectivity – 10/100M Ethernet, dual band Wi-Fi 802.11 b/g/n and Bluetooth 4.0 (AP6330 module) USB – 3x USB Host, 1x micro USB Misc – Recovery switch, power button, active cooling system Battery – 270 mAh (3.7V) Power Supply – 5V/2A Dimensions – 10 x 5.5 x 1.5 cm …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

How to Convert Your HDTV into a Massive Touchscreen Enabled Android Tablet

Thanks to Android mini PCs, it’s now very easy and cheap to run Android on your HDTV, but most of the time touchscreen functionality is missing. There are already full products such as AIO Android PCs, and Smart Displays that brings Android to large display with touchscreen, and PQ Labs iStick A200 HDMI TV stick supports directly their overlay touch frames so you can “touchscreenize” your TV with their mini-PC and correct frame connected via USB. If you’d rather use another model of infrared touch frame for your TV and own Android device, Hardkernel has just explained how to do in the February edition of ODROID magazine using their ODROID-XU development board. In the magazine, they explain some details about the difference between capacitive and infrared touchscreens, and provide instructions to choose the right IR touch frame, how-to modify the software if necessary, and how to connect the touch frame to the monitor. I’ll provide a summary of the practical step, …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

PQ Labs iStick A200 Android mini PC Connects to G4 Series Multi-Touch Screens

PQ Labs iStick A200 is a Rockchip RK3066 Android 4.1.1 mini PC with 2 GB RAM, 4 GB Flash, an HDMI (female) output, a USB 2.0 Host port, and a miniUSB port for power. Pretty boring stuff if you ask me… And I would not be writing about it, if the company hadn’t interfaced their infrared touch frames to this mini PC to allow 10-point multi-touch on a large screen or projector output, making it a pretty good solution for conferences and interactive digital signage. Before going further, let’s have a look at the details of specifications for the iStick A200: SoC – ARM Cortex A9 Dual Core @ 1.6Ghz with HyperSpeed (Equivalent to 2.0Ghz Dual Core) and Quad Core Mali400 GPU (cnxsoft: It has to be Rockchip RK3066) System Memory – 2 GB DRAM chipset Storage – 4 GB NAND flash + microSD socket (Up to 32 GB) Video Output – HDMI (female connector) Connectivity – WiFi (802.11 b/g/n) …

Support CNX Software – Donate via PayPal or become a Patron on Patreon