SolidRun HummingBoard is a Raspberry Pi Compatible Board Powered by Freescale i.MX6

Yesterday, I wrote about Banana Pi, an AllWinner A20 powered development board that’s mechanically and electrically compatible with the Raspberry Pi so that you can keep using your existing R-Pi accessories. It turns out another company is working on a similar concept. Solidrun who has brought us Cubox and Cubox-i in the past, will soon launch HummingBoard, a Raspberry Pi compatible board powered by Freescale i.MX6 solo/dual/quad SoC, bring even more power than the AllWinner A20 dual core Cortex A7 SoC found in the Banana Pi. The HummingBoard, previously known as Carrier One, is composed of a baseboard and SolidRun microSOM (micro System-on-Module) have comes with the followings specifications: SoC = Freescale i.MX6 Quad @ 1 GHz with Vivante GC2000 3D GPU. The microSoM also comes in solo and dual flavors, and although it’s likely the HummingBoard will be sold with these variants too, it’s not 100% confirmed System Memory – 2 GB RAM Storage – micro SD card slot, …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

AllWinner A80 To Support 5 Operating Systems, Products To Become Available in May

AllWinner has released some more materials about their AllWinner A80 Ultracore octa core big.LITTLE SoC ahead of the Hong Kong Electronics Fair 2014, and we’ve learned more about OptimusBoard, as well as tablets and TV boxes availability through a video interview shot by Charbax at the exhibition. Part of the release was more detailed specifications: CPU Octa-Core big.LITTLE Cortex-A15/7 Low-power CoolFlex power management architecture 2MB + 512 KB L2 Cache GPU – Imagination Technologies PowerVR 64-core G6230 with support for OpenGL ES 3.0/2.0, OpenCL 1.x, RenderScript, DX 9.3/10.0 Memory Supports dual-channel DDR3/DDR3L/LPDDR3/LPDDR2, up to 8GB Supports Raw NAND with 72-bit ECC Supports eMMC V4.5 Video Supports UHD H.264/VP8 [email protected] video playback Supports multi-format FHD video decoding, including MPEG 1/2/4, H.263, H.264. WMV9/VC-1, etc Supports H.265/VP9 [email protected] video playback Supports H.264 HP/VP8 [email protected] video capture Supports 3840×[email protected] 3D decoding, BD/SBS/TAB/FP supported Supports 3840×[email protected] 3D encoding Supports RTSP, HTTP, HLS, RTMP, MMS streaming media protocolsDisplay Display Supports dual-channel LVDS 1920×[email protected] Supports RGB …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Mediatek MT8639 Wi-Fi Display SoC to Support 802.11ac, NFC

Wi-Fi display technologies such as Miracast and Airplay allow you to conveniently mirror your mobile device on your TV without the needs to connect any cables, and for over about a year we’ve seen Miracast, Airplay, DLNA, and EZcast dongles on the market. In theory, this is all great, but in practice, this is all too often disappointing because of lag, sometimes the video quality is very poor, and sometimes it won’t connect. Mediatek is now working on MT8639 supporting 802.11ac which will hopefully offer a more consistent and enjoyable user experience, if your mobile device also supports 802.11ac. Here are the main features of the chip: ARM Cortex A7 @ 1 GHz Wi-Fi Dual band 2.4Ghz and 5 GHz 802.11 b/g/n/ and 802.11ac Wifi-Direct, Wi-Fi SoftAP, and Wi-Fi Bridge support Optional NFC support Wi-Fi Display – DLNA, Airplay, Miracast, “Windows” mirror Video Output – HDMI 1.4 / MHL 2.0 (Up to 1080p) Power – 2.1 W (against 2.5 W …

Support CNX Software – Donate via PayPal or become a Patron on Patreon