Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

October 30, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Banana Pro Allwinner A20 Development Board Looks Similar to Raspberry Pi Model B+

Banana Pi development board was launched about half year ago with Raspberry Pi model B form factor, but with more powerful Allwinner A20 dual core processor, and extra interfaces such as SATA. A few months later, the Raspberry Pi foundation launched Raspberry Pi Model B+ with pretty much the same specifications, but a different board layout and connector placement, and LeMaker has now designed a new version of the AllWinner A20 development board called “Banana Pro” that’s somewhat similar to R-Pi B+ board layout, with a 40-pin header, and similar connector placement, minus a few differences, such as using two USB ports instead of four, and the addition of a Wi-Fi module. Banana Pro specifications with differences against Banana Pi highlighted in bold: SoC- Allwinner A20 dual core Cortex A7 processor @ 1 GHz with Mali-400MP2 GPU System Memory – 1 GB DDR3 Storage – micro SD card slot, SATA […]

October 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

MIPI Introduces SoundWire Audio Interface for Mobile Devices

MIPI (Mobile Industry Processor Interface) Alliance is a non-profit corporation that establishes standards for hardware and software interfaces in mobile devices. MIPI is better known for its MIPI DSI (Display Serial Interface) and CSI (Camera Serial Interface), but as you can see from the diagram below, they’ve been busy publishing a lot more interface specifications. The latest being MIPI SoundWire, a new audio interface for amplifiers, microphones and audio codecs used in smartphones, tablets, mobile PCs and other devices. The consortium only released a “MIPI SoundWire Specification Brief” so there aren’t that many details. SoundWire is not the first audio interface from MIPI, with SLIMbus having been first introduced in 2007, and later updated in 2013 with SLIMBus 1.1. SLIMbus must not have been that widely used, as only Intrinsyc OPEN-Q 8084 Development Kit appears to feature the interface among all the board listed on CNX Software. Nevertheless SLIMBus and […]

October 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Qualcomm Releases Userspace Adreno 320 GPU Drivers for Ubuntu

Qualcomm Developer Network has just sent the October Newsletter by email, and they had some news specific to Ubuntu / Linux support on IFC6410 development board powered by a Snapdragon 600 processor. Firs they link to a guest blog post on Qualcomm website entitled “Video Conferencing on Linux with the Qualcomm Snapdragon 600 Processor“, where Qualcomm partner eInfochips stated: Qualcomm Technologies, Inc.’s leadership in mobile market with Linux Android support is well established. As the demand for Qualcomm Snapdragon processors, a product of Qualcomm Technologies, Inc., increase in adjacent markets, the need for non-Android Linux support becomes evident. Which is always good to read. The rest of the post blog provides a few more details about their a low-latency (50ms glass-to-glass) video conferencing solution based on OpenEmbedded build with Linaro Linux Kernel, and making use of Qt5, Gstreamer, and Sofia SIP library. Further improvements will be achieved with hardware video […]

October 30, 2014October 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Mastermind UT One is an Upcoming Ubuntu Touch Tablet Powered by Intel Bay Trail-T SoC

Canonical unveiled Ubuntu Touch for Phones & Tablets early 2013, launched an impressive yet failed crowdfunding campaign for Ubuntu Edge smartphone in Summer 2013, and after many more months of development, Ubuntu Touch phones are expected by the end of the year with Ubuntu version of Meizu MX3/MX4 and BQ Aquaris. Ubuntu Touch tablets may be coming soon as Phoronix has been informed of an upcoming UT One tablet powered by Intel Atom Z3735D and running Ubuntu Touch. UT One specifications: SoC – Intel Atom Bay Trail-T Z3735D quad core processor @ 1.33 to 1.5 GHz with Intel HD Graphics Gen 7. System Memory – 2GB DDR3L Storage – 16 GB internal flash + micro SD slot Display – 10.1″ IPS LCD with 1280×800 resolution. 10-point touch screen Video Output – micro HDMI Audio I/O – 3.5mm audio port, HDMI, 2x built-in speakers Connectivity – 802.11 b/g/n Wi-Fi, Bluetooth 4.0 […]

October 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Zero+ IoT Wi-Fi Board is Programmable with Lisp (Crowdfunding)

There have been so many low cost Wi-Fi modules and boards with GPIO headers announced this year, especially on crowdfunding sites, and from the hardware point of view, Zero+ (Zero Plus) board looks very much like many other Ralink RT5350 boards such as Vocore or AsiaRF AWM002, but what makes it different is that it can be programmed with Lisp from a web-based IDE. But let’s go through Zero+ board specifications first: SoC – Ralink/Mediatek RT5350 MIPS processor @ 360MHz with dual band 802.11n Wi-Fi with data Rate up to 150Mbps System Memory – 32 MB RAM Storage – 8MB to 16 MB SPI Flash (for firmware) Expansions Headers – 2x headers with access to I2C, SPI, USB, 2x UART, JTAG, and 14x GPIOs USB – 1x USB host port, 1x micro USB for power Misc – 2x buttons Dimensions – 36 x 25mm (possibly module dimensions only, not full board). I’m […]

October 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Nordic Semi Announces nRF51 DK Arduino Compatible Board, and nRF51 Dongle with Bluetooth Smart, ANT, and 2.4GHz Connectivity

Nordic Semiconductor has introduced two new low cost development boards supporting Bluetooh LE, ANT/ANT+, and proprietary 2.4GHz applications based on their nRF51 series SoCs: nRF51 DK, an Arduino UNO Rev.3 compatible board that can be used for various IoT and wearables applications, and nRF51 Dongle, a USB dongle to connect to a PC or board, which can be useful for packet sniffing and BLE peer connection. nRF51 DK Development Board Key features listed for the board: SoC – Supports nRF51822 (BT/2.4Ghz) and nRF51422 (BT/ANT) SoCs based on an ARM Cortex M0 processor, with 128kB or 256kB flash memory, and 16kB or 32kB RAM. Connectivity Bluetooth Smart, ANT/ANT+ and 2.4GHz proprietary Integrated PCB antenna Connector for RF measurements Expansions Headers Arduino Uno Rev. 3 compatible connector for use with 3rd party shields All I/O and interfaces available via connectors Debugging Segger J-Link OB and ARM CMSIS-DAP Program/Debug supported Support for Program/Debug […]

October 28, 2014October 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

OpenELEC for M8 TV Box (Amlogic S802) with USB Tuner Support

M8 TV Box is an Android media player based on Amlogic S802 that’s relatively popular. We’ve already seen XBMC Linux ported to M8 device, for people who want a more pure XBMC experience, and automatic frame rate switching, but now OpenELEC Beta 2 is also available for the device thanks to Alex Deryskyba (Codesnake). The firmware image (OpenELEC-Meson8-K200-devel-test build 2.zip) will work on M8 / TM8, and any other Amlogic S802 devices based on K200 board. It is based on OpenELEC 4.1.2 and Linux 3.10, and a beta version, so there may still be some bugs, for example Bluetooth is not working. One very interesting feature is built-in VDR / Tvheadend DVB backends which means you should be able to use one of these USB tuners to watch Live TV from your box via satellite (DVB-S/S2), cable (DVB-C) or digital terrestrial TV (DVB-T2/ATSC) dongle. The zip files contains three files […]

October 28, 2014October 28, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

BungBungame Photon2 Tablet Features AMD A10 Micro–6700T Mullins Processor

AMD A10 Micro–6700T is the most powerful AMD Mullins low power processor (4.5W TDP) that competes with quad core Intel Bay Trail-T processors, and even outperforms them in terms of performance, especially GPU performance with Radeon R6 graphics, but possibly not in terms of power consumption. BungBungame Photon2 may be the first tablet to feature this AMD processor, so let’s have a look. BungBungame Photon2 technical specifications: SoC – AMD A10 Micro-6700T quad core APU @ 1.2 to 2.2 GHz. with Integrated AMD Radeon R6 Graphics System Memory – 4GB DDR3L-1333 Storage – 64GB SSD + micro SD card slot up to 128GB Display – 10.1″ touchscreen display, 1920×1200, 16:10 aspect ratio Video Output – Micro HDMI 1.4a Connectivity – 802.11a/b/g/n/ac/MIMO Wi-Fi, Bluetooth 4.0 LE, NFC Camera – 2MP rear and front webcams USB – 1x micro USB 2.0 Battery – 31Wh battery good for 6 to 8 hours usage. […]