Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

July 27, 2015July 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$55 UWatch UX Strapless Heart Rate Monitor Watch Syncs with iOS and Android Devices

Last time I checked about heart rate monitor, they required a chest strap to monitor ones heart rate, which I found cumbersome. It’s been while though, and I’ve now been informed that a low cost Bluetooth strapless heart rate monitor watch was available for $59.99 on GeekBuying. This type of product should provide a much more accurate evaluation of your daily calories burn rate than typical fitness bands based on an accelerometer and gyro sensor, but I’m not quite sure how they compare to the old models with a chest strap. Uwatch UX specifications and features: SoC – Mediatek Aster MT2501 ARM7 processor @ 108 MHz (A lower end version of MT2502 used in LinkIt One Devkit) System Memory – 32MB RAM Storage – 24MB NOR flash Heart rate monitor – Built-in photoelectric heart rate sensor Other sensors – magnetometer, 3-axis gravity and acceleration sensor Connectivity – Bluetooth 4.0 and […]

July 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 45 Comments

New FCC Rules May Prevent Installing OpenWRT on WiFi Routers

Many cheap WiFi routers are sold with the vendor firmware, but the most popular ones likely also support OpenWRT, which some users may prefer as it is much more customizable. However, this may soon become more difficult according to a talk at the upcoming “Wireless Battle of the Mesh” which will take place on August 3-8 in Maribor, Slovenia. The talk scheduled for August 6 at 15:00 is entitled “openWRT vs. FCC – forced firmware lockdown?” and Simon Wunderlich, the speaker, provided the following abstract: The new FCC rules are in effect in the United States from June 2nd 2015 for WiFi devices such as Access Points. They require to have the firmware locked down so End-Users can’t operate with non-compliant parameters (channels/frequencies, transmit power, DFS, …). In response, WiFi access point vendors start to lock down firmwares to prevent custom firmwares (such as OpenWRT) to be installed, using code […]

July 25, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

NanoPi is a $16 WiFi and Bluetooth LE Linux Development Board

NanoPi is a new Linux development board powered by Samsung S3C2451 ARM9 processor with Wi-Fi and Bluetooth LE connectivity, connectors for a camera and an LCD display, as well as two expansion headers including a 40-pin “Raspberry Pi compatible” header. NanoPi specifications: Processor – Samsung S3C2451 ARM9 @ 400Mhz System Memory – 64M DDR2 Storage – micro SD slot Connectivity – AP6210 module for 802.11 b/g/n WiFi and Bluetooth 4.0 USB – 1x USB 1.1 host port, 1x micro USB OTG port for power and data (serial or Ethernet) Display I/F – LCD Interface: 0.5mm pitch SMT FPC seat, support full-color LCD (RGB: 8-8-8) Camera I/F – DVP Camera Interface: 0.5mm pitch FPC connector, including ITU-R BT 601/656 8-bit, I2C and GPIOs Debugging – Serial Port Expansion Headers “GPIO1” – 40-pin header including UART, SPI, I2C, GPIO pins (Raspberry Pi compatible) “GPIO2” – 12-pin header including I2S, I2C, UART pins Power – […]

July 24, 2015July 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

PiPo X1 is a Windows 10 Bay Trail HDMI TV Stick

PiPo used to the mostly know for its low cost tablets, but then they started launching ARM based mini PCs, and followed with x86 mini PCs such as the popular PiPo X7. Netbook Italia found out the company is now working on a new HDMI TV stick that will run Windows 10, but they must have run out of “lucky” names because the product will apparently be called PiPo X1, a name they already used for a Rockchip RK3188 TV stick… The hardware is not really interesting, as it has basically the same specs as the other Bay Trail-T sticks on the market: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz (Bust frequency: 1.83 GHz) with Intel HD graphics Gen 7 System Memory – 2 GB Storage – 32 GB eMMC + micro SD slot up Video & Audio Output – HDMI Connectivity – 802.11 […]

July 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Kodi 15 Isengard Release

After several months of development, including H.265 hardware decoding in Android, Kodi 15 “Isengard” has recently been released by the developers. It’s available for Windows, Linux, Mac OS X, and Android, and for the first time a stable release can directly be downloaded from Google Play store with so far over 400,000 active installs from the app store. Key features and improvements of Kodi 15 include: Android specific changes – 4K, refresh rate switching and H.265 for hardware that support it including several Amlogic platforms, and Nvidia Shield Android TV. Android 5.0 and greater is required. New chapter selector window – Allows users to visually browse and select chapters from mkv videos and other containers that support chapters Adaptive seeking (aka Skip Steps) – The more times a user presses a button to seek in a period of time, the larger the jump forward or backward will be. Audio and […]

July 22, 2015July 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

ODROID-C1+ Board is an Upcoming Upgrade to ODROID-C1 Board

ODROID-C1 board has been relatively popular thanks to its great hardware features and good software support for its $35 price tag. In mid-June however, ODROID-C1 got out of stock due to sudden large orders, and it was only scheduled to sale again in early August because of long leadtime for some components. It turns out ODROID-C1 may never sell again, simply because it will be replaced by ODROID-C1+ with various improvements. It’s still very much based on ODROID-C1 with Amlogic S805 processor, 1GB RAM, and an eMMC sockets, but Hardkernel made the following improvements: HDMI connector change to Type-A from Type-D (micro HDMI). Improved SD card compatibility CEC function whether the RTC backup battery is installed or not ODROID-C1+ can be powered from the USB OTG port as well as DC-Jack I2S signals exposed for external audio DAC All of which are welcomed modifications. The board size will remain the […]

July 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Geniatech Showcases Amlogic T866 TV Box with 2 HDMI inputs, 1 HDMI output

Amlogic mostly makes SoCs for tablets, for example the M80x series, and TV boxes such as Amlogic S805 or S812, but they also have a processor family designed for Smart TVs such as Amlogic T866 quad core Cortex A9 processor @ 1.8 GHz coupled with an octa-core Mali-450MP. Somehow, Geniatech has designed ATV1866 TV box based on the latter support two HDMI inputs, and one HDMI output. The box does not appears to support video recoding from the HDMI input, nor time-shifting, but the company showcased picture-in-picture (PiP) functionality, showing either input used in full screen or windowed mode on top of the Android user interface. HDMI version is 2.0 for the output, with H.265 codec supported, but I could not find details about the HDMI inputs. The box is running Android 4.4 for now, but will certainly run Android 5.0 at launch. The company is still developing the product, […]

July 21, 2015July 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Remix Mini Android Mini PC Offers a Better Desktop Experience (Crowdfunding)

Android mini PC are great to consume content, but when I tried to blog with one, I found many shortcomings which made it not such as good user experience, and writing articles on an Android mini PC everyday, it would seriously decrease my productivity. That’s probably why Chinese start-up Jide Tech decided to work on Remix OS, based on Android 5.0 but with customizations for a better desktop experience including multitasking support, resizable windows, shortcuts support, a taskbar, and more. The company has now launched a Kickstarter campaign for a low cost mini PC powered by Allwinner A64 and Remix OS. They called it Remix Mini, and dubbed it the “First True Android mini PC”. Two versions are available, one with 1GB RAM + 8GB storage, and one with 2GB + 16GB storage. Specifications: SoC – Allwinner H64 quad core Cortex A53 processor @ 1.2 GHz System Memory – 1 […]