Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

December 2, 2016December 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

CHUWI LapBook 14.1″ Full HD Laptop is Powered by Intel Celeron N3450 Apollo Lake Processor

We’ve already seen Voyo Vbook A1 Apollo Lake laptop based on Intel Celeron N3450 SoC going for pre-order a couple of weeks ago, but its has a 11.6″ display only, and I prefer to use larger screens when I need a laptop as it’s less of a shock when switching from my 39″ TV screen connected to my desktop computer. CHUWI LapBook offers just that with many of the same specifications as Voyo laptop, but with a 14.1″ display instead, and a little less storage & battery capacity. CHUWI LapBook laptop specifications: SoC – Intel Celeron N3450 quad core “Apollo Lake” processor @ 1.1 GHz / 2.2 GHz (Burst frequency) and 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz (Burst freq.); 6W TDP System Memory – 4GB DDR3L Storage – 64 GB eMMC flash + micro SD slot up to 128 GB Display – 14.1″ IPS […]

December 2, 2016December 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mediatek Introduces Helio X23 and X27 Processors with Faster Clocks, Better Camera Support, Lower Power Consumption

Mediatek has just announced upgrades to their Helio X20 and X25 deca-core processors with respectively Helio X23 and X27 boasting higher CPU and GPU frequencies, higher camera quality, as well as lower power consumption thanks to MiraVision EnergySmart Screen power-saving technology. The two new processor still feature MediaTek tri-cluster deca-core architecture with two ARM Cortex A72 cores, four ARM Cortex A53 core, and 4 more low power Cortex A53 cores, but Helio X23 Cortex A72 cores’ max CPU frequency increased from 2.1 GHz to 2.3 GHz, and Helio X27 got a small boost to 2.6 GHz for the Cortex A72 cores (vs 2.5 GHz) and 1.6 GHz for the low power Cortex A53 cluster, as well as a higher frequency ARM Mali-T880 MP4 GPU at 875 MHz instead of 850 MHz for Helio X25. MediaTek Helio X23 and X27 also support dual camera photography with the upgraded MediaTek Imagiq image […]

December 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Seagate Duet Portable Hard Drive Automatically Syncs with Amazon Cloud Drive

Seagate has announced the launch of Seagate Duet 1TB portable hard drive with auto-sync to Amazon Cloud Drive, so that your data is always backed in the cloud. If you use the drive to backup data, that means you’ll have a extra backup copy in the cloud, which could be useful if the drive fails just when you want to back it up (it happened to me), or somehow your house burns down… Another advantage is that if you forget to take your drive with you, the data will be accessible from anywhere with an Internet connection from Amazon Cloud service. It connects through your Mac or PC’s USB 3.0 port, and sync files to the cloud after an initial setup with your Amazon account. Once the setup is done, you can use the drive as you’d normally do, and files will automatically be backed up in the cloud. The […]

December 1, 2016December 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Hack Autonomous Driving into Your Car with Open Source Hardware Comma Neo and Open Pilot Software

George Hotz setup Comma.ai company and worked on a commercial project called Comma One to add autonomous driving to some car models, but then the US highway authorities started to ask questions and promised ever increasing fines if he could not comply with some specific safety regulations/requirements, and eventually he decided to cancel the project due to the regulatory burden. A few weeks passed since the cancellation, and he has now released Open Pilot auto-pilot software and Comma NEO a work-in-progress open source hardware platform connecting to Qualcomm Snapdragon 820 powered OnePlus 3 smartphone to run the software. The system is said to implement “Adaptive Cruise Control (ACC) and Lane Keeping Assist System (LKAS) for Hondas and Acuras”, and performs about the same as “Tesla Autopilot at launch, and better than all other manufacturers”. Open Pilot currently only supports the Acura ILX 2016 with AcuraWatch Plus and the Honda Civic […]

December 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

reMarkable 10.3″ Digital Notepad and e-Reader is Designed to Feel Like Paper

If you like to take notes with pen and paper, but would prefer a digital solution to store your note, there are already some solutions like Boogie Board and Rocketbook, but reMarkable offers much more that the other two with a 10.3″ E-Ink touchscreen display and pressure sensitive pen capable of detecting 2048 levels of pressure sensitivity, it allows to read books as any e-readers, and also write your own notes on a blank piece of “paper” or existing digital documents, drawing sketches, and save & share the results. The whole user experience is supposed to feel as if you were reading and writing on paper. reMarkable tablet specifications: SoC – ARM Cortex A9 processor @ 1 GHz (Likely NXP i.MX6 series processor since they support EPD interfaces) System Memory – 512 MB DDR3L Storage – 8GB internal storage good for around 100,000 pages Display – 10.3″ monochrome digital paper […]

November 30, 2016November 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

NXP Modular IoT Gateway Supports Thread, Zigbee, NFC, Bluetooth and WiFi Connectivity

NXP has just announced a modular IoT gateway solution for large node networks (>= 250 nodes) based on Volansys i.MX6UL system-on-module, supporting wireless communications protocols such as Thread, ZigBee, NFC through add-on modules, on top of Wi-Fi and Bluetooth 4.1. NXP Modular IoT Gateway specifications: SoM – Volansys i.MX6UL 200-pin SO-DIMM module with: SoC – NXP i.MX 6UL ARM Cortex A7 processor @ 528 MHz System Memory – 256MB to 1GB DDR3L RAM Storage – 1GB to 4GB NAND flash, optional 4GB to 16GB eMMC flash, EEPROM for device info PMIC, Mbit Ethernet PHY Wireless Connectivity Expansion Modules: PN7120 explorer board for NFC Kinetis KW41 module for Thread support JN5169 module for Zigbee support 2x MikroBUS headers Baseboard connectors / features: Storage – 1x micro SD slot Connectivity – 1x 10/100M Ethernet port, Murata WiFi 802.11 b/g/n & Bluetooth 4.1 + EDR module with external antenna connector USB – 2x […]

November 30, 2016November 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

You Can Buy AirPods-like Wireless Bluetooth Stereo Earbuds for $16 and Up

Most Bluetooth headsets on the market actually come with some sort of wire or holding mechanism, which may not always be convenient, for example I can’t use mine comfortably while lying down on the bed. But that to electronics miniaturization, companies have recently started to offer truly wireless Bluetooth earbuds, including Apple’s yet-to-be available $159 Airpods. This morning I noticed two similar products in new arrivals list, first with $59.99 QCY Q29 mini Earburds on GeekBuying, and then even cheaper, but not quite as good looking (and likely not so good sounding), “FreeStereo Twins Wireless Bluetooth v4.1 In-Ear Headset w/ Mic” on DealExtreme going for just $22.25 including shipping. Let’s start with QCY Q29 earbuds specifications: Connectivity – Bluetooth 4.1 with HFP, HSP, A2DP, AVRC protocols support; up to 5-10 meter range Built-in Microphone Charging port – pogo on earbuds, micro USB to storage/charging box Battery – 45mAh for up […]

November 30, 2016November 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$59 HiFive1 Arduino Compatible Board is Powered by Sifive Open Source RISC-V MCU (Crowdfunding)

Royalty-free RISC-V instruction sets has been getting in the news in the last few years with various MMU designs from companies or projects like lowRISC, PULPino, and SiFive, and recently there are been rumors that Samsung may use RISC-V in their future IoT SoCs. Many projects are still in progress, and while you can get involved in OnChip Open-V MCU crowdfunding campaign to their get the MCU or a development board, the cost for the MCU ($49) and development board ($99) is a little on the high side, and delivery is expected in 2018 for most rewards. SiFive appears to have a more interesting open source RISC-V solution with HiFive1 Arduino compatible board going for $59 and slated to ship between December 2016 and February 2017. HiFive1 development board specifications: MCU – SiFive Freedom E310 (FE310) 32-bit RV32IMAC processor @ up to 320+ MHz (1.61 DMIPS/MHz) Storage – 128 Mbit […]