Hardware Category - Page 48 of 1189 - CNX Software

December 16, 2024December 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Olimex ESP32-P4-DevKit offers Ethernet, USB JTAG, MIPI DSI and CSI interfaces

Olimex ESP32-P4-DevKit is a compact development board powered by a 400 MHz ESP32-P4 general-purpose dual-core RISC-V microcontroller with a 10/100Mbps Ethernet RJ45 connector, a USB-C Serial/JTAG connector, MIPI DSI/CSI connectors for a display and a camera, GPIO headers and UEXT connector, Boot and Reset buttons, and a few LEDs. In some ways, it offers similar to the Waveshare ESP32-P4-NANO board we covered last month, but in a different form factor, and it lacks WiFi 6 connectivity and a USB Type-A connector. It’s also much more compact and cheaper than the official ESP32-P4-Function-EV-Board launched this summer, but again, with fewer features. Olimex ESP32-P4-Devkit: Microcontroller – ESP32-P4 MCU Dual-core RISC-V microcontroller @ 400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz GPU – 2D Pixel Processing Accelerator (PPA) VPU – H.264 and JPEG codecs support Memory – 768 KB HP L2MEM, 32 […]

December 16, 2024December 19, 2024 by Sponsored Post - No Comments

Save up to 50% on PCB orders with PCBWay Christmas 2024 Big Sales event (Sponsored)

PCBWay has a special treat for Christmas 2024 with the Big Sales event for up to 50% on PCB manufacturing and assembly services. But that’s not all, as the PCB manufacturer also offers free coupons, free PCB prototypes for Christmas, and a game to win free modules. Let’s have a closer look at each offer and conditions. Nine coupons are offered including several valid for all services, and two specific to the company’s CNC and 3D printing services: $5 discount for $30 or more orders $10 discount for $59 or more orders $15 discount for $109 or more orders $30 discount for $279 or more orders $50 discount for $699 or more orders $100 discount for $1299 or more orders $200 discount for $2999 or more orders CNC and 3D printing coupons: $5 discount for $29+ orders, and $20 off for $199+ orders You’ll be asked to log in to […]

December 16, 2024April 20, 2025 by Debashis Das - No Comments

STM32-powered MM6108-EKH05 Wi-Fi HaLow evaluation kit supports Bluetooth, Camera, and Qwicc/MikroBus modules

Morse Micro has recently launched the MM6108-EKH05 Wi-Fi HaLow Evaluation Kit designed to reduce the development and deployment time of IoT products. Built around the Morse Micro MM6108 HaLow SoC, this kit combines long-range, low-power wireless connectivity with a range of integrated sensors, making it ideal for IoT engineers and developers. Key features include Wi-Fi HaLow connectivity, an STM32U585 Cortex-M33 MCU, integrated sensors (temperature, humidity, accelerometer), 16 MB of SPI Flash memory, programmable GPIOs, power measurement tools, and WPA3 security for reliable and secure communication. The kit also includes alternative power options including USB, battery, or external power, and embeds support for a camera, MikroBus and Qwicc expansion modules, Bluetooth, and current measurement circuitry. All these features make this kit useful for applications including smart homes, industrial automation, and agricultural monitoring. MM6108-EKH05 specifications: MCU – STM32U585 Arm Cortex-M33 microcontroller @ 160 MHz with TrustZone, 2 MB Flash Storage – 16Mbit […]

December 15, 2024March 29, 2025 by Sayantan Nandy - 1 Comment

Nordic Thingy:91 X multi-sensor cellular IoT platform combines nRF9151 LTE IoT SiP, nRF5340 BLE SoC, and nRF7002 WiFi 6 IC

Nordic Semiconductor introduced the Nordic Thingy:91 in mid-2019, a cellular IoT prototyping platform built around the Nordic nRF9160 system-in-package (SiP). It supports LTE-M, NB-IoT, and GPS, and includes features like an Arm Cortex-M33 core, Arm TrustZone security, and flash memory. The platform is ideal for creating IoT Proof-of-Concepts, demos, and prototypes, making it easy to test and deploy IoT applications. The upgraded Nordic Thingy:91 X features the new Nordic nRF9151 SiP, offering support for LTE-M, NB-IoT, GNSS, and DECT NR+ for global connectivity, integrates the nRF5340 SoC for USB and Bluetooth LE, and the nRF7002 IC for Wi-Fi locations. The platform includes sensors for environmental and motion sensing, one expansion connector for Qwiic/STEMMA QT and Grove modules, and antennas for LTE, GNSS, and Wi-Fi. Additionally, the kit also features a Nano/4FF SIM slot, two SIM cards, and a 1,350 mAh Li-Po battery managed by nPM6001 and nPM1300 PMICs, to support field […]

December 14, 2024December 13, 2024 by Tomisin Olujinmi - 1 Comment

4D Systems Raspberry Pi RP2350 display modules come in touch and non-touch options for embedded applications

4D Systems, an Australian company specializing in intelligent display solutions, has released Raspberry Pi RP2350-powered display modules with touch and non-touch options. The display modules are available in eight different sizes from 2.4-inch to 9.0-inch and different resolutions from 240×320 up to 800×480 pixels. They are “Powered by Raspberry Pi”-certified and leverage the Raspberry Pi RP2350’s dual-core architecture and security features for “secure, professional-grade applications that require modern UI”. 4D Systems is well-known for its high-quality displays designed for developers looking to create sophisticated user interfaces in embedded systems. There are four touch panel options for each gen4-RP2350 display module: non-touch, resistive touch, capacitive touch, and capacitive touch with a cover lens bezel (CLB). The gen4-RP2350 series also features a 30-pin FPC/ZIF socket to fit a 0.5mm pitch FFC for connecting a motherboard or accessory board. We have already covered Waveshare’s RP2350-LCD-1.28 display module but the gen4-RP2350 display modules are […]

December 13, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

HUNSN RJ42 and RJ43 Intel N150 fanless network appliances and mini PCs come with four 2.5GbE ports, four video outputs

We’ve previously seen the new Intel N150 “Twin Lake” processor in mini PCs such as Beelink EQ14 and ASUS NUC 14 Essential among others, but the new quad-core CPU is now also found in HUNSN RJ42 and RJ43 fanless network appliances with four 2.5GbE RJ45 ports. They also double as mini PCs with multiple video outputs and USB ports. The mini PCs ship with up to 32GB RAM and 512GB of storage, support four independent displays through HDMI, DisplayPort, and USB-C interfaces, and offer five USB Type-A ports for expansion. The HUNSN RJ42 and RJ43 offer a similar set of features as previous Intel N100 network appliances with 2.5GbE ports such as the iKOOLCORE R2 and INCTEL N100, but with a slightly faster Intel N150 “Alder Lake-N Refresh” or “Twin Lake” processor thanks to higher clock speeds, and extra interfaces. HUNSN RJ42/RJ43 specifications: SoC – Intel Processor N150 quad-core “Twin […]

December 13, 2024February 2, 2025 by Jean-Luc Aufranc (CNXSoft) - No Comments

Khadas Mind 2 AI Maker Kit – An Intel Core Ultra 7 258V “Lunar Lake” mini PC for developers

Khadas recently announced the Mind 2 mini PC with an Intel Core 5 or 7 “Meteor Lake” mini PC. But the company is prepping the launch of another similar device called the “Khadas Mind 2 AI Maker Kit Dev Workstation” or “Intel Core Ultra Processor (Series 2) AI PC Dev Kit” with a 15th Gen Intel Core Ultra 7 258V “Lunar Lake” processor offering up to 115 TOPS of AI performance. I’ll just call it “Khadas Mind 2 AI Maker Kit” for shorts. The system ships with 32GB RAM and a 1TB SSD, and Khadas says the new system is designed specifically for developers working on AI PC applications, but apart from the faster SoC, it comes with similar features as the Mind 2. This includes HDMI 2.0 video output, two 40Gbps USB4 ports, Wi-Fi 6E (802.11ax), and Bluetooth 5.3 connectivity, as well as two USB 3.2 Gen2 Type-A ports […]

December 13, 2024December 12, 2024 by Tomisin Olujinmi - No Comments

STMicro releases STM32N6 Cortex-M55 MCU series with in-house NPU and dedicated computer vision pipeline

STMicro has announced the availability of the STM32N6 microcontroller series based on the 800MHz ARM Cortex-M55 and the 600 GOPS-capable Neural-ART Accelerator. The STM32N6 is the company’s “newest and most powerful STM32 series,” bringing MPU-level performance to MCUs. It is the first STM32 to feature the Arm Cortex-M55 and offer up to 4.2MB of embedded RAM. Additionally, the chip includes ST’s NeoChrom GPU and an H.264 hardware encoder. According to Remi El-Quazzane, MDRF (Microcontrollers, Digital ICs, and RF Products) President at STMicro, the STM32N6 “marks the beginning of a long journey of AI hardware-accelerated STM32, which will enable innovations in applications and products in ways not possible with any other embedded processing solution.” STMicro offers two versions of the STM32N6 MCU: the STM32N6x7 AI line featuring the Neural-ART accelerator and the STM32N6x5 GP (general-purpose) product line without an NPU. The microcontroller series is primarily targeted at computer vision and audio […]