Congatec conga-TCR8 AMD Ryzen Embedded 8000 COM Express computer-on-module series delivers up to 39 TOPS of AI performance

conga-TCR8 COM Express Compact module

Congatec has released a new line of Ryzen Embedded 8000-powered COM Express Type 6 Compact computer-on-modules with the conga-TCR8 module series offering up to 39 tera operations per second (TOPS) for AI inference and 128GB of DDR5-5600 memory with error correction code (ECC) for data-sensitive and data-critical applications. The Ryzen Embedded 8000 processor series comes with either six or eight ‘Zen 4’ cores, an integrated XDNA neural processing unit (16 TOPS), and the AMD Radeon RDNA 3 graphics unit which can be used as a general-purpose graphics processing unit with up to 12 compute units (adding up to 39 TOPS for the SoC). Graphics output is supported by four displays with up to 8K resolution, and peripheral options include six PCIe Gen 4 slots, four USB 3.2 Gen 2 ports, four USB 2.0 ports, and three DisplayPort interfaces. The conga-TCR8 Type 6 modules are intended for high-volume applications that require […]

The Things Indoor Gateway Pro: A Managed LoRaWAN Solution with ESP32 and Semtech SX1302

The Things Indoor Gateway Pro with dual external antenna

The Things Industries first introduced the Things Indoor Gateway, an affordable multi-channel LoRaWAN gateway designed for IoT networks in 2019. While low-cost single-channel gateways like Dragino OLG01, priced as low as $83.50, were available, they often struggled with connectivity in shared environments. The Things Indoor Gateway, priced around $111, offered a reliable solution for large-scale IoT deployments. Building on this success, the company has now launched the next-generation Things Indoor Gateway Pro. This managed LoRaWAN gateway is designed for seamless IoT network installation, featuring zero-touch provisioning, full cloud management, and flexible connectivity options including LTE, Ethernet, and Wi-Fi with automated failover. With advanced device management tools such as mTLS, FOTA, and secure boot, the Things Indoor Gateway Pro is a future-ready solution tailored for evolving IoT needs. Previously, we explored a variety of LoRaWAN gateways, including the AgroSense LoRaWAN for high-precision agriculture, the WisGate Soho Pro RAK7267 for greenhouse monitoring, […]

u-blox X20 all-band GNSS module offers centimeter-level accuracy, u-blox F9 pin-to-pin compatibility

u blox X20 all band GNSS module

u-blox has recently launched the X20 all-band GNSS module with an integrated L-band receiver that supports all available GNSS satellite signals (L1/L2/L5/L6) and can provide centimeter-level accuracy globally. The module also includes PPP (Precise Point Positioning) correction on top of RTK (Real-time Kinematic) and features like end-to-end security functions, advanced jamming/spoofing detection, and other software features. These features make this device useful for industrial automation, automotive, UAVs, and ground robotics applications. Multi-band GNSS receivers using L1, L2, L5, and the new L6/E6 band frequencies enhance accuracy, reliability, security, and other benefits. That includes better PNT (Positioning, Navigation and Timing) and RTK performance, access to global precise point positioning (PPP) services like Galileo HAS, faster convergence times in PPP for industrial and automotive use, and access to regional PPP services like MADOCA-PPP. Additionally, it helps comply with regional regulations like AIS-140 for NavIC in India and improves jamming and spoofing immunity […]

Radxa X4 review – An Intel N100 alternative to Raspberry Pi 5 tested with Ubuntu 24.04

Radxa X4 Ubuntu 24.04 review

We already looked at the Radxa X4 kit featuring an Intel N100 SBC with a design similar to the Raspberry Pi 5 and accessories including a Radxa Power PD 30W power adapter, an NVMe SSD, and a USB-C to USB-C cable, in the first part of the review, before installing Ubuntu 24.04 on the board.

In the second part of the review, we will test Ubuntu 24.04 in more detail with some benchmarks and power consumption measurements to show how well it works (or not) compared to a Raspberry Pi 5. We will also test the 40-pin GPIO header on the Radxa X4 controlled through a Raspberry Pi RP2040 microcontroller.

NXP i.MX RT700 dual-core Cortex-M33 AI Crossover MCU includes eIQ Neutron NPU and DSPs

NXP i.MX RT700 AI crossover MCU block diagram

NXP has recently announced the release of  NXP i.MX RT700 RT700 AI crossover MCU following the NXP i.MX RT600 series release in 2018 and the i.MX RT500 series introduction in 2021. The new i.MX RT700 Crossover MCU features two Cortex-M33 cores, a main core clocked at 325 MHz with a Tensilica HiFi 4 DSP and a secondary 250 MHz core with a low-power Tensilica HiFi 1 DSP for always-on sensing tasks. Additionally, it integrates a powerful eIQ Neutron NPU with an upgraded 7.5 MB of SRAM and a 2D GPU with a JPEG/PNG decoder. These features make this device suitable for applications including AR glasses, hearables, smartwatches, wristbands, and more. NXP i.MX RT700 specifications: Compute subsystems Main Compute Subsystem Cortex-M33 @ up to 325 MHz with Arm TrustZone, built-in Memory Protection Unit (MPU), a floating-point unit (FPU),  a HiFi 4 DSP and supported by NVIC for interrupt handling and SWD […]

AAEON SRG-CM4 IoT gateway features Raspberry Pi CM4 SoM for industrial applications

AAEON SRG-CM4 Gateway

AAEON SRG-CM4 is an IoT gateway based on the Raspberry Pi Compute Module 4 (CM4) with 1GB to 8GB of RAM and 8GB to 32GB of eMMC storage, all powered by the Broadcom BCM2711 quad-core Cortex-A72 SoC. The gateway features a modular chassis, maintaining the compact size and industrial-grade features typical of AAEON’s edge gateway products, making it ideal for various embedded applications. In terms of connectivity, the SRG-CM4 offers two switchable serial ports supporting RS-232/422/485, with an optional isolated RS-485 port, CAN 2.0 A/B, and two isolated DI/DO. Additional interfaces include two Gigabit Ethernet RJ45 ports, two USB 2.0 ports, and an HDMI 1.4 video output. The device operates within a wide temperature range of -20°C to 70°C and supports a DC 9V to 36V power input, ensuring reliability in industrial environments. We previously covered the reComputer R1025-10, a Raspberry Pi CM4-based DIN Rail industrial gateway with optional wireless […]

ADLINK AVA-1000 is a rugged EN50155-compliant T2G gateway for railway and industrial applications

ADLINK AVA 1000 T2G gateway top view

The ADLINK AVA-1000 T2G gateway is a rugged, EN50155-compliant T2G (Train-to-Ground) gateway designed for railway and industrial environments. Powered by a choice of NXP i.MX8M Plus Quad Cortex-A53 processor or an Intel Processor N50 Alder Lake-N processor. The i.MX8M Plus model is equipped with up to 8GB LPDDR4 and a 64GB eMMC flash whereas the Alder Lake variant features up to 4GB LPDDR5 memory and a 32GB eMMC flash. In terms of connectivity, the gateway features three M12 GbE ports and supports a wide range of options including 5G, WiFi 6, and GNSS. The AVA-1000 T2G gateway’s fanless design, wide operating temperature range, and 24-110V DC input ensure reliable operation in industrial environments. Additionally, its compliance with EN50155 and other industrial standards makes it ideal for various industrial applications. AVA-1000 T2G gateway specifications System Processor (multiple options) NXP i.MX8M Plus quad-core Cortex-A53 processor @ up to 1.8 GHz with Cortex-M7 […]

MYiR Tech MYC-LD25X – A compact STM32MP25 system-on-module running Debian 12

MYD LD25X development board

MYiR Tech’s MYC-LD25X is a compact 39x37mm system-on-module built around the STMicro STM32MP25 dual-core Cortex-A35 SoC running at 1.5GHz with a Cortex-M33 core, and an NPU capable of 1.35 TOPS. The module comes with up to 2GB LPDDR4 RAM, 8GB eMMC storage, and a range of connectivity options, including Gigabit Ethernet, USB, CAN FD, UART, and SPI. Designed for industrial HMI, edge computing, energy systems, and automation, the MYC-LD25X is suitable for high-performance applications in these fields. Previously, we covered other development boards from MYiR, including the MYD-J7A100T, MYD-YG2UL, MYD-YG2LX, and MYD-J1028X. We also wrote about other STM32MP25-based system-in-package and system-on-module namely the Digi ConnectCore MP25 and Octavo OSD32MP2. Feel free to check them out if you’re interested. MYC-LD25X STM32MP25-based System-On-Module MYC-LD25X specifications: SoC – STMicro STM32MP257D processor CPU – Dual-core Arm Cortex-A35 64-bit RISC core operating at up to 1.5 GHz MPU – 32-bit Arm Cortex-M33 RISC core clocked at […]

Youyeetoo X1 x86 SBC