Category: Android

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Open Source Mali 200/400 Drivers (LIMA) Demo on Android Tablet

Open Source Mali 200/400 Drivers (LIMA) Demo on Android Tablet

Luc Verhaegen, the lead developer of LIMA open source project, provided an update at LinuxTag 2012 last week-end. This open-source MALI GPU driver isn’t ready for consumers yet, but the LIMA team has made some progress and showcased an OpenGL ES demos running on a Chinese tablet running Android. Luc said the tablet used for the demo is the same hardware as the Spark KDE/Vivaldi tablet, so the video demo below must be running on an AMLogic 8726-M processor with a Mali 400 GPU. The drivers already (partially) work on both Mali-200 and Mali-400 GPUs. The fragment shader instructions set is fully known and they have disassembler and assembler fully implement, but they still need to work on the compiler. The vertex shader instruction set is 80% known, they have a simple shader disassembler and are working on the assembler. You can also watch the 40 minute presentation at LinuxTag […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on YOOE F4 – Freescale i.MX6 Quad Core Cortex A9 Android 4.0 Tablet

YOOE F4 – Freescale i.MX6 Quad Core Cortex A9 Android 4.0 Tablet

Freescale i.MX6 processors will finally be available in some devices very soon, as YOOE is currently finalizing the development of YOOE F4 (Model: RT-E597A), a 9.7″ tablet powered by Freescale i.MX6 Quad with 1 GB of RAM and running Android 4.0.4. Samples will be available in June and mass-production is expected to start in July. The company will sell this tablet for 220 to 250 USD retail. Charbax is currently in Shenzhen and a shot a video showing the tablet at the company offices, and performance seems to be very good. YOOE is the company that manufactures one of the first low cost Allwinner A13 Tablets. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Rikomagic MK802 Android mini PC Unboxing and Review

Rikomagic MK802 Android mini PC Unboxing and Review

Youtube user Zaatour36 has received the low cost MK802 Android 4.0 mini-PC based on AllWinner A10 processor and has uploaded 2 videos. The first video gives an overview of the device connectors and show the different cables (mini HDMI to HDMI, USB) and adapters (microUSB to USB and power) that are provided with the MK802. The second video is more like a review, and shows how to connect the device, go to the setup menu to change the settings and language and play around with the different Android applications. You’ll also be able to get a feeling of the performance. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Ubuntu, Tizen, XMBC… Demos at Q2.12 Linaro Connect in Hong Kong

Ubuntu, Tizen, XMBC… Demos at Q2.12 Linaro Connect in Hong Kong

Linaro has announced several demos would take place at Linaro Connect on June 1st, 2012 in Hong Kong: Big.LITTLE in-kernel Switcher (Linaro) SIProp – Combat Scouter – How much your Combat Power? (SIProp) Android Toolchain Improvements (Linaro) Origen Running Awesome Code (Linaro) Snowball with MM enablement (Linaro) Tizen on Snowball (Linaro) Google+ Hangouts on an ARM Board (Linaro) Low-Cost Logic Analyzer (Linaro) XBMC on Snowball – ST Ericsson Snowball (Linaro) (Ubuntu) Unity 3D on Snowball (Linaro) Ubuntu TV on Snowball (Linaro) PCM (Phase Change Memory) : Linaro kernel meets with the PCM technology (Micron) ARM DS-5 & Linaro (ARM) Most of the demos will be organized by Linaro, but three others companies will also shown the “show”, namely SIProp, Micron and ARM. It’s always interested to see what happens at Linaro because it gives a view into the future to what may comes to the new products and developers can see what new features are available for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on VIA Technologies Unveils the APC, an ARM11 $49 Android PC

VIA Technologies Unveils the APC, an ARM11 $49 Android PC

VIA Technologies has today introduced the Android PC system (APC) powered by WonderMedia ARM11 processor, with 512 MB RAM and 2MB Flash in a small Neo-ITX motherboard and that will sell for a mere 49 USD, slightly higher than the 35 USD Raspberry Pi. But whereas the Raspberry Pi would struggle to run Android with 256 MB, the APC has just enough memory top run Android 2.3 and Android 4.0. Another advantage is the presence of a VGA connector which is missing on the Raspberry Pi, as well as a few other connectors. Here are VIA APC hardware specifications: VIA WonderMedia 8750 ARM11 CPU@ 800 MHz 2GB NAND Flash 512 DDR3 SDRAM Hardware Video Decoder supporting up to 1080p resolution VGA and HDMI display ports 4x USB 2.0 ports microSD slot 10/100 Ethernet port Audio-out/ Mic-in 15W power adapter Power consumption: 4 Watts (Idle) 13.5 Watts (Max. load) Dimensions: 17cm […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Droid Stick KVD-13 Another Low Cost Android mini-PC

Droid Stick KVD-13 Another Low Cost Android mini-PC

Following the steps of the $74 Android 4.0 mini PC (MK802), a couple more ARM based mini PCs have shown up, including Shenzhen Kimdecent Technology Droid Stick KVD-13 powered by a Renesas processor based on Cortex A9 with a PowerVR SGX530 GPU (possibly Renesas NEC EV2 processor), featuring 512 MB RAM, 4GB Flash and running Android 2.3. The good thing with this mini PC is that the HDMI connector is of the right gender: male. No offense to HDMI female connectors ;), but for this type of device, it’s just neat to plug it directly into the TV/monitor HDMI connector. Here are the device specifications: CPU Renesas Cortex-A9 Dual Core Processor @ 1GHz with PowerVG SGX530 GPU System Memory 512MB DDR3 Storage 4GB NAND Flash microSD card Connectivity WiFi 802.11b/g/n USB Ports 1x USB 2.0 Host 1x mini USB (for power) Video Output 1x HDMI 1.4 (Up to 1080p) Video Codecs […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Phytec phyCORE-AM335x System on Module (SOM) Based on TI Sitara AM335x

Phytec phyCORE-AM335x System on Module (SOM) Based on TI Sitara AM335x

PHYTEC announced the phyCORE-AM335x System on Module (SOM) powered by Texas Instruments Sitara AM335x Cortex-A8 processor clocked at 720Mhz and PowerVR SGX530 GPU. This SoM targets industrial applications and supports standards such as EtherCAT, Ethernet/IP, PROFINET, PROFIBUS, POWERLINK, SERCOS-III and CANopen. Here are phyCORE-AM335x SOM specifications: TI’s Sitara AM335x ARM Cortex-A8 processors @ 720 MHz (AM3352, AM3354, AM3356, AM3357, AM3358 and AM3359) PowerVR SGX530 Graphics (AM3359, AM3358, AM3354 only) 512 MB DDR3, 512MB/1GB NAND, 8 MB SPI Flash, 32 KB EEPROM 6x  UARTs, 3x I2C, 2x McASP, 2x SPI, 2x CAN 2x USB OTG 2x 10/100/1G Ethernet (Gigabit PHY on carrier board) 24 bpp TTL or LVDS 44 x 50 mm form factor -40 degrees to +85 degrees C temperature range Linux, Compact 7, Android The phyCORE-AM335x SOM will be available in a PHYTEC Rapid Development Kit (RDK) including: phyCore-AM335x SOM A carrier board Board support packages (BSP) Demo images […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 70 Comments on 74 USD AllWinner A10 Android 4.0 Mini PC

74 USD AllWinner A10 Android 4.0 Mini PC

A cheap white brand Android 4.0 USB/HDMI Stick based on AllWinner A10 has started to show up in Chinese websites. Initially, I thought it was like a low cost version of FXI Tech Cotton Candy (which will start shipping this month), but as you can see in the image below, the HDMI port is female so you’d still need a HDMI cable. The hole next to the USB port should be for the power supply, so this device is apparently not powered via USB (TBC). Connect a wireless mouse and keyboard to the device, the power supply, and an HDMI cable to your TV, and you’ve got yourself a cheap PC running Android 4.0. Since this is based on AllWinner A10, you could also insert a microSD card with Ubuntu, Debian or your other favorite Linux distribution and have yourself a Linux PC. Here are the specifications of the device […]