Category: Android

Posted on by Jean-Luc Aufranc (CNXSoft) - 29 Comments on Mele A1000: AllWinner A10 (Cortex A8) Based Hackable Android STB

Mele A1000: AllWinner A10 (Cortex A8) Based Hackable Android STB

The Mele A1000 is an Android 2.3 IP Set-top Box (STB) powered by AllWinner A10 (Cortex A8) CPU with 512 MB RAM and 2 GB NAND Flash.  AllWinner A10 is the CPU to be used by the 15 USD (BOM Cost) Rhombus Tech Linux Computer, an alternative to the Raspberry-Pi. Since they do not have an alpha board yet, the Mele A1000 STB is apparently the development platform chosen by developers involved in Rhombus Tech low cost board while they wait for the hardware. Let’s have a look at the device specifications: CPU: ARM CortexA8 1GHz (AllWinner A10) Memory: DDR3 512MB RAM / 2 4GB Nand Flash OS System: Android 2.3 External Storage: Supports SD card up to 32GB, supports 2.5″ SATA HDD up to 1TB, Supports max 16GB USB flash disk Video coding: HD MPEG1/2/4.H.264.HD AVC/VC-1,RM/RMVB, Xvid/DviX4/5/6, RealVideo8/9/10, VP6 Video Format: ts/m2ts/tp/trp/mkv/mp4/mov/avi/rm/rmvb/wmv/vob/asf/flv/dat/mpf/mpeg Audio Format: MP3/WMA/WMV/OGG/FLAC/MKV Subtitle Format: SRT/SMI/SSA/ASS Network […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linux 3.3 Release

Linux 3.3 Release

Linux Torvalds announced the release of Linux Kernel 3.3 on the 18th of March: So after the extra -rc release last weekend, now the final 3.3 is out there in the usual locations. Things did indeed calm down during the last week, and the shortlog looks pretty boring. The diffstat from -rc7 is dominated by the arch/tile defconfig changes, the rest is pretty small, although there are changes spread out in various subsystems (drivers, filesystem, networking, perf tools). … And obviously, the 3.3 release means that the merge window for 3.4 is now open, although I may keep of pulling stuff for a day or so to encourage people to test the actual release. Linux 3.2 brought ext-4 and btrfs file system improvements, support for Qualcomm Hexagon processor, an improved profiling tool (perf top), and better CPU and network bandwidth management. Linux 3.3 brings the following key changes: Android merge: […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on A Novel Approach to In-Vehicle Infotainment (IVI) – Android Builder Summit 2012

A Novel Approach to In-Vehicle Infotainment (IVI) – Android Builder Summit 2012

Thomas B. Rücker,  Program Manager at Tieto, discusses In-Vehicle Infotainment (IVI) with Android at the Android Builder Summit in February 2012. Abstract: In the future vehicles are going to be always online. The constantly increasing number of electronic devices raises consumer expectations. Both driver and passengers want to be online. This requires new and flexible IVI and HMI solutions. Users expect intuitive and simple to operate interfaces, but at the same time they expect the systems to handle a lot of their data and apps. We are witnessing a paradigm shift in Infotainment solutions. Open software platforms will allow users to add new functionality and services, also by third parties, over the whole life-span of a product. This requires solutions that reconcile the multi-media world of consumers with traffic security requirements, in a cost effective and secure hardware platform. The presentation will highlight challenges and opportunities by bringing Android to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Archos G10 xs Teaser Video with Sliding Keyboard Dock

Archos G10 xs Teaser Video with Sliding Keyboard Dock

Archos has just released a teaser video for its next generation Android tablet, the Archos G10 xs (xs stands for extra small). The video does not show much, except the concept of the new tablet which features a sliding keyboard where the tablet can be docked. Archos has not released the specifications for the G10 XS yet, but we do know the casing is made of stainless steel, is 7.6mm thick (12mm with the keyboard) and Archos has worked for 3 years on this design. There will be several models whose retail price should be between 200 and 300 Euros (Which would be between 200 and 300 USD in the US thanks to lower taxes). The new tablets will be powered by a Texas Instruments processor (probably OMAP 4) like the Archos G9 tablets and run Android 4.0 and Windows 8 depending on the model. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on Using OpenOCD JTAG in Android Kernel Debugging – Android Builder Summit 2012

Using OpenOCD JTAG in Android Kernel Debugging – Android Builder Summit 2012

Mike Anderson, CTO and Chief Scientist for The PTR Group, gives a tutorial about Linux kernel debugging in Android with OpenOCD JTAG at the Android Builder Summit in February 2012. Abstract: Owing to the use of the Linux kernel, Android device drivers can be debugged using many of the same techniques as Linux. Still, much of the user-space interface code typically found in Linux is missing in Android. This complicates the debugging of kernel driver code. This presentation will demonstrate the use of the open on-chip debug (OpenOCD) software and an inexpensive JTAG to debug Android kernel code. The target audience for this presentation are platform developers looking to debug their kernel code such as device drivers. This presentation is targeted at intermediate-level developers with some understanding of kernel code development. You can also download the presentation slides on linuxfoundation.org website. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Android Device Porting Tutorial – Android Builder Summit 2012

Android Device Porting Tutorial – Android Builder Summit 2012

Benjamin Zores, Open Source Software and Multimedia Architect at Alcatel-Lucent, gives step-by-step to port Android to your own device at Android Builder Summit in February 2012. Abstract: This talk is presented as a step by step tutorial meant for Android platform rookies, as to discover all Androidisms one has to tackle down to bring his own custom device to life. Based on a real-life Android 4.0 ICS device porting experience, the talk will cover early board bringup (from U-Boot and Fastboot to Linux kernel and drivers), AOSP device integration, Android-specific device init customization, touchscreen input layer adaptations and Hardware Abstraction Layer (HAL) driver interfaces development. You can also download the presentation slides on linuxfoundation.org website. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on ADB: (Android Debug Bridge) : How It Works – Android Builder Summit 2012

ADB: (Android Debug Bridge) : How It Works – Android Builder Summit 2012

Tetsuyuki Kobayashi, working at Kyoto Microcomputer a Japanese development tool vendor, explains how the ADB (Android Debug Bridge) works at Android Builder Summit in February 2012. Abstract: ADB is very nice and important tool. Every Android Builders uses adb command such as ‘adb shell’ and ‘adb logcat’. But what does it mean ‘adb kill-server’ ? I studied the source code of adb. I share you how adb works and some tips I found. This session is for developers who want to know Android internal deeply. You can also download the presentation slides on linuxfoundation.org website. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Using Android Outside the Mobile Phone Space – Android Builder Summit 2012

Using Android Outside the Mobile Phone Space – Android Builder Summit 2012

Jason Kridner, chief software architect for the Sitara ARM microprocessor business at Texas Instruments (TI) and the community development manager, explains why and how to use Android in diverse embedded systems (and not only smartphones and tablets) at the Android Builder Summit in February 2012. Abstract: A few years back all embedded devices were designed like PCs. For example, users understood the use of a mouse and keyboard and could minimize and maximize a window using mouse clicks and launch new applications from Start. The increasing demand and usage of smartphones globally has not just changed the definition of user experience for embedded equipments but has made emerging technologies like touch and display panels, connectivity solutions and infrastructure, affordable to non- phone products segments. The embedded equipment designers and users have grown accustomed in no time to the smartphone features and technologies like multi-touch, high-resolution display panels, connectivity over 3G […]