Folding@Home ARM64 Linux Beta Release for COVID-19 Vaccine Research

Folding@Home ARM64 Raspberry Pi

A few months ago, we reported that Rosetta@Home supported 64-bit Arm SBC’s and Servers in the Fight against COVID-19. But Folding@home did not support Arm hardware just yet, but thanks to work from Neocortix, Linaro, Arm, miniNodes, and Packet.com, we now get support for Folding@home on ARM64 meaning you can help researchers studying SARS-CoV-2 virus and help them develop a COVID-19 vaccine with Raspberry Pi 3/4 boards, or other 64-bit Arm SBC’s and servers. The solution relies on Neocortix Cloud Services Platform allowing the unused capacity of large numbers of individual mobile phones or other connected nodes to be harnessed into a single, unified computational engine. The very first application that made use of the platform was Neocortix PhonePaycheck were users get paid to let businesses perform calculations on their phones at night while charging and connected to WiFi. That way users of premium phones like Galaxy S10 or S20 […]

How to Fix Unreliable USB Hard Drives, Stalled Transfers in Linux

Fix USB Hard Drive Stalled Linux

Last June, I reviewed a Ryzen Embedded SBC with Windows 10, and the USB hard drive I normally use for review had all sorts of problems including very slow speeds and/or stalled transfers but no error messages. Last week, I tried again by installing Ubuntu 20.04 on the same Ryzen Embedded SBC, and the USB hard drive had troubles again, so just assume there were some hardware incompatibility issues between the SBC and the drive, and there may not be a fix or workaround. Sometimes, it’s indeed a hardware issue with the drive getting too many bad blocks, and if that’s the case, and the drive is still under warranty you can return it and get a fresh new (or refurbished) drive for free. But that drive was still working with my laptop getting around 100MB/s. So I ran out of ideas until numero53 commented he had similar problems with […]

Exor nanoSOM nS02 System-on-Module Features the 800MHz version of STM32MP1 Processor

800 MHz-STM32MP1 System-on-Module

Arrow Electronics and Exor Embedded have announced the nanoSOM nS02 system-on-module based on the 800MHz version of STMicro STM32MP1 microprocessor unveiled last February. The 25.4 x 25.4mm module is designed for IoT edge applications such as smart IoT controllers and gateways, cloud edge interfaces, and building automation. A supporting development kit can also be provided by Arrow Electronics. NanoSOM nS02 specifications: SoC -STMicro STM32MP157 dual-core Cortex-A7 processor @ 800MHz with 3D GPU System Memory – Up to 1GB DDR3L Storage – Up to 32GB eMMC flash, 4KB EEPROM USB & Ethernet Hub – Microchip LAN9512 controller 131x solder pads with Storage – 2x SD Video Output – 24-bit RGB LCD parallel or 2-lane MIPI DSI Camera Input – 8,10,12-bit video input Audio – 1x I2S channel Networking – 2x 10/100M Ethernet (one native, one via USB hub) USB – 2x USB 2.0 host, 1x USB OTG 4x SPI, 1x I2C, […]

Supermicro Launches SuperServer SYS-E100-9W-H Fanless Whiskey Lake Embedded Mini PC

SuperServer SYS-E100-9W-H Whiskey Lake-Embedded Industrial Computer

US-based Supermicro is known for its server products, but the company’s latest SuperServer SYS-E100-9W-H fanless embedded mini PC targets other applications, specifically industrial automation, retail kiosks, smart medical devices, and digital signage. The mini PC is equipped with an Intel Core i7-8665UE Whiskey Lake Embedded processor coupled with up to 64GB DDR4 memory, and offers plenty of connectivity options with dual Gigabit Ethernet, eight USB ports, four serial ports, and dual video output with HDMI and DisplayPort.SuperServer SYS-E100-9W-H specification: SoC – Intel Core i7-8665UE quad-core/octa-thread Whiskey Lake Embedded processor @ 1.7 GHz (Base) / 4.4 GHz (Turbo) with Intel UHD Graphics 620; 15W TDP System Memory – 2x DIMM slots for up to 64GB DDR4-2400MHz (non-ECC) Storage – Support for M.2 NVMe/SATA SSD Video Output – HDMI and DisplayPort Audio – ALC 888S HD Audio codec, optional Mic-in/Line-Out Networking – Dual Gigabit Ethernet via Intel I210IT and Intel I219LM USB […]

BaHa Box Smart Automation Hub Features Allwinner H2+ or NXP i.MX 6ULL Processor (Crowdfunding)

BaHa Box

Most devices on the market are designed with a single brand of processor, but for their BaHa Box smart automation hub, xPoint Products decided to offer either Allwinner H2+ or NXP i.MX 6ULL versions. Why is that? Easy: Allwinner H2+ processor provides a cheaper solution for the residential market, while NXP i.MX 6ULL wide temperature range makes it more suitable for commercial applications. Both versions of BaHa Box smart hub run Linux on 256MB RAM, and offers Ethernet, WiFi, and Bluetooth connectivity, with options for Zigbee and Z-Wave. The hub supports over 2,000 devices and can work either connected to the cloud, or “offline” without internet. BaHa Box specifications: SoC Residential-grade version – Allwinner H2+ quad-core Cortex-A7 processor Commerical-grade version – NXP i.MX 6ULL Cortex-A7 processor System Memory – 256MB DDR3 Storage MicroSD card slot Residential-grade version – 256KB flash Industrial-grade version – 256MB flash Connectivity 10/100M Ethernet, WiFi, and […]

Odyssey Blue J4105 Windows & Linux Mini PC Comes with a 128GB SSD, an Arduino Compatible MCU

Odyssey Blue J4105

We recently reviewed ODYSSEY-X86J4105 SBC by Seeed Studio with Windows 10, and installed it to the Re_Computer case to convert it into a mini PC. Besides being a standard Intel Gemini Lake SBC, the board also comes with an Arduino MCU and header, as well as a 40-pin I/O header so it can be an all-in-one Arduino development platform, or be used for advanced robotics projects. Both the board and case had to be purchased separately, and Windows 10 was pre-installed on the internal eMMC flash. But now, Seeed Studio has started to offer Odyssey Blue J4105 mini PC with ODYSSEY-X86J4105 SBC pre-installed into Re_Computer case and fitted with a 128GB SSD for increased storage capacity and better performance. Odyssey Blue J4105 mini PC specifications: SoC – Intel Celeron J4105 quad-core processor @ 1.5/2.5 GHz (Turbo) with 12EU Intel UHD Graphics 600 @ 250-750 MHz; 10W TDP System Memory – […]

iWave Telematics Control Unit Supports GPS, 4G LTE, WiFi, and Bluetooth

iWave Telematic Control Unit

We’ve often written about iWave Systems’ single board computers, development kits, and systems-on-module, but the company has also been offering automotive products such as a Linux based OBD-II Dongle. And they’ve just introduced a new one called Telematics Control Unit (TCU) based on an Arm Cortex-A7 processor and offering GPS, 4G LTE Cat 4/1/M1, WiFi 5, and Bluetooth 5.0 connectivity for vehicle fleet management and insurance companies that want to know how drivers behave… iWave Telematics Control Unit (TCU iW-G26) specifications: Processor – Arm Cortex-A7 based CPU @ 792MHz (likely NXP i.MX 7ULP) System Memory – 256MB DDR3L SDRAM Storage – 4GB eMMC Flash Connectivity 4G LTE Cat 4, Cat 1, Cat M1 (eMTC) 802.11b/g/n Wi-Fi 4 or 802.11b/g/n/ac Wi-Fi 5 (Hotspot & Station mode) Bluetooth 5.0 GNSS – GPS/A-GPS receiver with antenna Sensors – 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer OBD Features & Protocols 12V Power Input from TCU […]

RAK2287 Mini PCIe LoRaWAN Concentrator Module Supports up to 500 Nodes per km2

RAK2287 LPWAN Concentrator Module

RAK Wireless launched its first Mini PCIe LoRaWAN concentrator module in 2018 with RAK833 mPCIe card featuring Semtech SX1301 LoRa baseband chip. It was soon followed by RAK2247 mPCIe with a very similar design but some tweaks to increase its maximum transmission power and range, and improve thermals and stability with the addition of a heatsink. The company has now introduced a new version with RAK2287 Mini PCie LoRaWAN concentrator module being mostly inspired by RAK2247 module but replacing Semtech SX1301 by Semtech SX1302 LoRa transceiver that’s suppose to reduce current consumption (and heat), lower the BoM cost, and able to handle a higher amount of traffic. The new mini PCIe card also adds u-blox ZOE-M8Q GPS system-in-package to provide GNSS functionality. RAK2287 key features and specifications: LoRa Connectivity Semtech SX1302 LoRa Transceiver with 2x SX1250 Tx/Rx front-end Tx power – up to 27dBm Rx sensitivity – down to -139dBm […]

Exit mobile version
Youyeetoo X1 x86 SBC