Linux Category - Page 352 of 551 - CNX Software

February 1, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

BayLibre ACME Cape for BeagleBone Black Measures Power and Temperature with Sigrok

Sigrok open source signal analysis software suite had a major release last week-end with libsigrok 0.4.0, libsigrokdecode 0.4.0, sigrok-cli 0.6.0, and PulseView 0.3.0. The new version added numerous bug fixes for supported hardware such as UNI-T UT61E digital multimeter or USBee AX Pro logic analyzer, and added support for several logic analyzers, oscilloscopes, multimeters, programmable power supplies, an electronic load, an LCR meter, a scale, and one BeagleBone Black cape, namely BayLibre ACME. The ACME initiative was launched in order to get rid of the limitations of proprietary solutions, and provide an open source hardware and software multi-channel power and temperature measurements solution to the community. BayLibre ACME cape supports up to 8 probes to measure VBUS (0 to +36V), VSHUNT ( 2.5uV up to 81.92mV), CURRENT AND POWER. Three current / power probes have been developed with all featuring TI INA226 for the ADC conversion: ACME HE10 Power Probe […]

January 31, 2016January 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MINIX NGC-1 Braswell Mini PC Runs Windows 10 or Ubuntu

MINIX showcased some unnamed Braswell mini PCs at IFA 2015 last September, but since then the company has been pretty quiet about their new Intel based mini PCs. The good news is that MINIX NGC-1 will be launched in about two weeks with an Intel Celeron N3150 quad core “Braswell” processor coupled with 4GB RAM, and 128GB M.2 SSD, and beside running Windows 10 64-bit, it will also support Ubuntu. MINIX NGC-1 specifications: SoC – Intel Celeron N3150 quad-core processor @ 1.6 GHz / 2.08 GHz (Turbo) with 2MB L2 cache, and Intel HD graphics with 12EU (4W SDP / 6W TDP) System Memory – 4GB DDR3L Storage – 128 M.2 SSD Video Output – HDMI 1.4 up to 4K @ 30 Hz, and mini DisplayPort Audio I/O – HDMI, 3.5mm stereo jack (microphone + headphone), and optical S/PDIF Connectivity – Gigabit Ethernet, 802.11ac WiFi and Bluetooth 4.2 with two […]

January 29, 2016January 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Intrinsyc Open-Q 600 Single Board Computer is Powered by Qualcomm Snapdragon 600 Processor

Intrinsyc has released several Qualcomm Snapdragon development kits and system-on-modules over the last few years, and the company has now unveiled their first single board computer with Open-Q 600 SBC powered by Snapdragon 600 quad core processor with 2GB RAM and 16GB eMMC flash. Open-Q 600 specifications: SoC – Qualcomm Snapdragon 600 (APQ8064) quad core Krait 300 processor @ 1.7GHz with 2MB L2 cache, Adreno 320 GPU, and Hexagon QDSP6V4 DSP System Memory – 2GB PCDDR3 RAM @ 533MHz; dual channel 32-bit Storage – 16GB eMMC 4.5 flash, micro SD card slot Video Output / Display I/F – HDMI 1.4a port for up to 1080p @ 60Hz, 2-lane MIPI-DSI connector Audio – HDMI, 3.5mm stereo headset output with mono input, 3.5mm Mic line in; Qualcomm WCD9311 audio codec Camera – 2-lane MIPI-CSI connector supporting 8 MP camera up to WXGA resolution @ 60 fps Connectivity Gigabit Ethernet (RJ45) via Qualcomm […]

January 28, 2016January 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

BeagleBone Black Industrial 4G is Red, and Offers an Extended Temperature Range

BeagleBone Black is a great little board for hobbyists with plenty of I/Os, and decent software support, but the development board has not been designed to be used in low or high temperatures as found in some industrial settings, so Element14 has designed BeagleBone Black Industrial 4G with the same specifications as BeagleBone Black Rev C, but a red PCB, support for an extended temperature range between -20 and +85°C, and additional board protection with a conformal coating. BeagleBone Black Industrial 4G Specifications: SoC – Texas Instruments Sitara AM3358BZCZA10 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3L @ 800 MHz Storage – 4GB eMMC + micro SD slot Video Out/Display I/F – HDMI and LCD interfaces Connectivity – 10/100M Ethernet (RJ45) Serial Port – UART0 access via 6 pin 3.3V TTL Header. Header is populated USB – USB 2.0 Client port: Access to […]

January 27, 2016January 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SDK Released for Steam Link Based on Marvell ARMADA 1500 Mini Processor

Steam Link is a small $50 device that streams PC Games played from Steam PC or Steam Machine to your TV up to 1080p resolution through your home network, and Valve has recently released an SDK to allow developers creating their own apps. But before getting into the SDK features, let’s check out the hardware. The company (Valve) did not provide many details, but some users torn it down, so the hardware specs are not a secret anymore. SoC – Marvell DE3005-A1 ARMv7 processor @ 1.0 GHz with OpenGL ES2.0 capable GPU System Memory – 512MB RAM (Micron MT41K256M16LY-107) Storage – 4GB NAND flash (Micron MT29F32G08CBAC) Video Output – HDMI up to 1080p60 Connectivity – 10/100M Ethernet, WiFi 802.11 b/g/n/ac and Bluetooth 4.0 LE via Marvell 88W8897 wireless chip USB – 3x USB 2.0 host ports Power Supply – 5V via power barrel Dimensions – N/A Marvell DE3005-A1 is also […]

January 27, 2016January 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Orange Pi One Quad Core ARM Linux Development Board Launched for $9.99

Orange Pi One board was unveiled at the end of last year as a cheaper alternative to Orange Pi PC with Allwinner H3 quad core processor, 512 MB RAM, an Ethernet Port and HDMI output. I’ve already compared it to C.H.I.P and Raspberry Pi Zero, and found that it was both much more powerful and cheaper to use as an Internet connected board with HDMI output than the two more well-known competitors. The good news is that Orange Pi One is now selling for $9.99 + shipping on Aliexpress, which in my case would be $13.38 in total. Orange Pi One technical specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – micro SD card slot Video & Audio Output – HDMI with CEC support Connectivity – 10/100M Ethernet USB -1x […]

January 27, 2016January 27, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

OpenAMP Open Source Framework Provides the Glue between Linux, RTOS, and Bare Metal Apps in Heterogeneous SoCs

SoCs becoming more complex, and go beyond homogeneous multicore systems by mixing different type of cores such as high performance cores, low power real-time cores, or even FPGA fabric. Examples include NXP i.MX6 SoloX with an ARM Cortex A9 core for Linux apps, and an ARM Cortex M4 core for real-time tasks, or Xilinx Zynq UltraScale+ MPSoC with Cortex A53 core for higher level apps, Cortex R5 cores for real-time processing, and Ultrascale FPGA logic. All these different cores are running their own Linux based OS, real-time operating system or bare metal application, and all this makes software development an even greater difficult tasks. In order to reduce the complexity, and address some of the issues, the Multicore Association has launched a new working group targeting the management, expansion, and standardization of OpenAMP (Open Asymmetric Multi Processing), an open source framework that allows operating systems to interact within a broad […]

January 26, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Rhombus Tech 15.6″ Libre Laptop is User-Upgradeable with EOMA68 CPU Cards

When the first Raspberry Pi model launched, there was just not enough boards to fill the demand, and as people kept waiting they were also investigating alternatives, and a growing community worked on Allwinner based platforms. At the time (2012), the main hardware project was EOMA68 CPU card using a PCMCIA connector, with ended up inside Improv development board, and aimed at providing user replaceable and upgradeable CPU cards. Sadly the initiative got some issues, and things did not quite work out as expected, but the person who launched the whole project, Luke Kenneth Casson Leighton (LKCL), did not give up on the idea, and has kept on working on EOMA68 standard with CPU cards from Allwinner and other SoC vendors. Recently, he’s been working on a Libre Laptop based on an Allwinner A20 EOMA68 CPU module, and will showcase the prototype at FOSDEM 2016 in Brussels this coming week-end. […]