Linux Category - Page 353 of 551 - CNX Software

January 25, 2016February 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Zsun Wifi Card Reader Can Now Run OpenWrt

Zsun Wifi card reader is a tiny micro SD card reader with WiFi connectivity, and while people managed to access the device serial console a few months ago, the plan was to eventually run OpenWrt since it’s based on the popular Atheros AR9331 WiSoC combined with 64MB RAM and 16MB SPI Flash. It would also be one the smallest OpenWrt capable device with dimensions of 30 x 33 mm. A team of Polish managed this feat, and have now posted instructions to install OpenWrt, as well as other documentation, for example a description of the board’s GPIOs. There are four methods to flash OpenWrt: Solder on an Ethernet jack and flash from the original uboot (hard but safe) Reflash the bootloader from the original firmware to one that supports upload over serial (less soldering but fatal if you mess up) Reflash the firmware from the original firmware using mtd_write (easy […]

January 25, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Autonomous Deep Learning Robot Features Nvidia Jetson TK1 Board, a 3D Camera, and More

Autonomous, a US company that makes smart products such as smart desks, virtual reality kits and autonomous robots, has recently introduced a deep learning robot that comes with a 3D camera, speaker and microphone, Jetson TK1 board, and a mobile base. The robot appears to be mostly made of the shelves parts: 3D Depth camera – Asus Xtion Pro 3D Depth Camera Speaker & Microphone Nvidia Jetson TK1 PM375 board – Nvidia Terra K1 quad-core Cortex A15 processor @ 2.3 GHz with a 192-core Kepler GPU, 2GB RAM, 16 GB flash Kobuki Mobile Base – Kobuki is the best mobile base designed for education and research on state of the art robotics. Kobuki provides power supplies for external computer power as well as additional sensors and actuators. Its highly accurate odometry, amended by calibrated gyroscope, enables precise navigation. The robot is designed for research in deep learning and mobile robotics, […]

January 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

NanoPi 2 Fire Board Adds Gigabit Ethernet and Power Management, Drops WiFi and Bluetooth

NanoPi 2 board, based on Samsung S5P4418 quad core Cortex A9 processor with WiFi and Bluetooth, has now gotten a brother, called Nano Pi 2 Fire, with wireless connectivity replaced by Gigabit Ethernet, and a power management IC (PMIC) for software power-off, sleep and wakeup. NanoPi 2 Fire specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz System Memory – 1GB 32bit DDR3 Storage – 1x Micro SD Slot Connectivity – Gigabit Ethernet port Video Output / Display I/F- 1x HDMI 1.4a, 0.5 mm pitch SMT FPC seat for full-color LCD (RGB: 8-8-8) Camera – 24-pin DVP interface; 0.5mm pitch USB – 1x USB Host port; 1x micro USB 2.0 OTG port for power and data Expansions Headers – 40-pin Raspberry Pi compatible header with UART, I2C, SPI, GPIOs… Debugging – 4-pin header for serial console Misc – User and reset buttons, power and user […]

January 20, 2016January 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

JaguarBoard is a $65 Single Board Computer Powered by Intel Atom Z3735G Processor (Crowdfunding)

While we have recently started to see low Intel Atom x5 “Cherry Trail” development boards such as UP Board and LattePanda, we have not really seen any Intel Atom Z3735F/G “Bay Trail” boards despite their popularity in mini PCs and TV sticks. JAGUAR ELECTRONIC H.K. aims to fill that avoid with their JaguarBoard single board computer powered by an Intel Atom Z3735G processor coupled with 16GB flash and 1GB RAM. JaguarBoard specifications: SoC – Intel Atom Z3735G quad core processor @ 1.33GHz / 1.83GHz (burst) with Intel HD graphics @ 311 MHz / 646 MHz System Memory – 1GB DDR3L RAM Storage – 16GB eMMC flash, 1x micro SD card slot up to 32GB Video Output – HDMI 1.4 @ up to 1080p Audio – HDMI, Line In and Line Out (stereo) 3.5mm jacks Connectivity – 10/100Mbps USB – 3x USB 2.0 Expansion Headers 8-pin header with 2x UART and I2C 4-pin […]

January 16, 2016January 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

PixiePro Board Combines NXP i.MX6Q Processor with WiFi 802.11ac, Bluetooth 4.2, NFC, GPS, and a 3G Modem

Saying that the market now provides a wide range of development boards is probably an understatement, but Code Ing has found out that most hobbyist boards had limited on-board wireless connectivity with WiFi and Bluetooth basically the best you could expect, with any extra wireless functionality requiring USB dongles. So the company designed PixiePro single board computer powered by NXP i.MX6Q quad core Cortex A9 processor with on-board wireless connectivity including WiFi 802.11ac, Bluetooth 4.2, GPS/GLONASS, NFC and a 3G module. PixiePro board specifications: SoC – NXP i.MX6Q quad core Cortex A9 processor @ 1 GHz with Vivante 2D and 3D GPUs System Memory – 2GB 64-bit DDR3 Storage – 2x UHS-I micro SD card slot up to 104 MB/s Video Output – micro HDMI up to 1080p60 Audio Output – HDMI and 3.5mm mini TOSLINK optical port/Line Out Connectivity WiFi 802.11 a/b/g/n/ac 2×2 MIMO with two antenna connectors Bluetooth […]

January 15, 2016October 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Ocean is a Battery Powered Mobile Server Powered by Allwinner A20 Processor

iCracked, a company selling and repairing iPhones, has designed a thin and battery powered mobile Linux server called Ocean. The device is powered by Allwinner A20 processor with 1GB RAM, 4GB flash completed with 8 to 64 GB internal storage (SD card), and runs Debian 8.1 Jessie. Ocean mini server specifications: SoC – Dual core ARM Cortex A7 processor @ 1.0 GHz System Memory – 1GB DDR3 @ 480 MHz Storage – 4GB flash for firmware, 8 to 64 GB internal SD card Connectivity – 802.11 b/g/n WiFi up to 72 Mbps, and Bluetooth 4.0 LE + EDR with 10 dBm Antenna USB – 1x USB 2.0 host port, 1x mini USB for power Misc – Programmable RGB button Battery – 4,200 mAh; good for two days of continuous CPU usage; Charged via mini USB port (~4 to 5 hours) or Qi charger (~10 hours) Dimensions – 15 x 7.8 […]

January 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Review of EzeeCube Media Hub and Private Cloud Server

EzeeCube is a Linux Kodi based media hub powered by Freescale i.MX6 Quad processor that includes a 1 or 2 TB hard drive by default and is expandable with extra 2TB hard drive modules that you simply stack on top of each other to get up to 10TB storage. I had a look at EzeeCube hardware last October, but due to one issue with the Android app that prevents syncing pictures between my phone and the hard drive on the device, one of the key selling point of the system, I decided to postpone the review. EzeeCube developers finally found a workaround in early December, but as I was busy with other tasks and the end of year holidays, I only managed to finally review the device in the last few days. Initial Setup The first thing that you go through after connecting all cables, and powering up the media […]

January 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AMD Launches 3 ARM based Opteron A1100 Server SoCs: A1120, A1150 and A1170

AMD Roadmap showed “Seattle” Cortex A57 server SoC were expected in H2 2014, which later became known as Opteron A1100, and the company unveiled their Optron A1100 development board in summer 2014, but since then there has been a few delays, the announcement of Huskyboard 96Boards EE development board, and finally they announced availability of three Opteron A1100 processors yesterday. So there’s one quad core Cortex A57 with Opteron A1120, and two octa-core with Opteron A1150 and A1170 clocked at respectively 1.7 and 2.0 GHz. I was surprised by the rather high TDP at 25W and 32W since one of ARM advantage is low power consumption. But since it is a server SoC it needs to be compared to Intel server SoC, and AnandTech did that against Intel Atom C2750 with eight Silvermont cores @ 2.4 GHz. On the three important metrics, i.e. price, performance and power consumption, AMD A1170 […]