Linux Category - Page 605 of 609 - CNX Software

October 25, 2010October 25, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

Finding a device IP Address

If you are developing software for an Ethernet (or Wifi) device, you’ll need to access the board for debugging and/or testing purpose. If your board does not have user interface or the serial port is not available, you’ll have to find the IP address (assuming it is using DHCP) before accessing the board thru telnet or ssh. A simple way to do that is to ping the broadcast address and check the arp table. > ping -b 192.168.0.255 WARNING: pinging broadcast address PING 192.168.0.255 (192.168.0.255) 56(84) bytes of data. 64 bytes from 192.168.0.246: icmp_seq=0 ttl=64 time=0.018 ms 64 bytes from 192.168.0.101: icmp_seq=0 ttl=64 time=0.217 ms (DUP!) 64 bytes from 192.168.0.246: icmp_seq=1 ttl=64 time=0.023 ms > arp -i eth0 arp -i eth1 Address HWtype HWaddress Flags Mask Iface 192.168.0.103 ether 00:50:FC:00:00:01 C eth1 192.168.0.109 ether 00:13:20:01:01:01 C eth1 If you cannot find your device, it may be configured to […]

October 5, 2010October 5, 2010 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

How to check open files for a process

While debugging your program, you may encounter the message “Too many open files”. One way to fix the issue could be to review your code and check open, fopen, socket and pipe calls are matched with close and fclose calls, but with large projects this may be cumbersome. A better way is to list the open files using the proc filesystem. I’ll use VirtualBox program as an example since this is running in our server. First, locate the process ID (PID): pgrep VirtualBox 3901 3950 Then list the file descriptor opened for process 3901 sudo ls -l /proc/3901/fd total 0 lrwx—— 1 root root 64 2010-10-05 14:52 0 -> /dev/pts/1 lrwx—— 1 root root 64 2010-10-05 14:52 1 -> /dev/pts/1 lr-x—— 1 root root 64 2010-10-05 14:52 10 -> pipe:[15825] l-wx—— 1 root root 64 2010-10-05 14:52 11 -> pipe:[15825] lr-x—— 1 root root 64 2010-10-05 14:52 12 -> pipe:[15829] […]

September 21, 2010November 4, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

Netgem Set-top-box N5000 – Toshiba Places

Mid-september, Netgem showcased their new set-top box at IBC 2010: the Netbox N5000 Internet/TV Adaptor. A modified version of this Set-top box will be used by Toshiba (Toshiba places) and be available for purchase for 99 Euros starting in October 2010 in France and later in 2011 in some other Europeans countries. [ad#Google Adsense – Wide Banner] First let’s have a look at the casing (Not the one used by Toshiba places). The front panel has the Power LED, a USB port and the remote sensor. They’ll either provide Infrared or RF remotes depending on the end customer requirements. The back of the set-top box features TV In/Out, Digital Audio (S/PDIF) output, HDMI output, an Ethernet port and the power jack (+12V). Their product brief also mentions a USB port on the rear as an option and Wifi support (802.11n). The Netbox N5000 hardware is based on Sigma Designs SMP8655 […]

September 19, 2010September 19, 2010 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

D-link Boxee Box available for pre-order

D-link Boxee set-top-box is available for pre-order on amazon for 199 USD. It can only be pre-ordered to addresses in the US for now and shipments should start in November. D-Link disclosed that its device is based on an Intel Atom processor CE4100 (Sodaville), not an ARM or MIPS processor as many other STBs do. It is running on embedded Linux. Key features listed by D-Link for the device (beside its weird shape) are basically those of the Boxee media-streaming software on which it’s based: Enjoy thousands of shows available for free from your favorite networks, ready to watch at any time Check-out free movies from the web & watch new releases in stunning HD from premium movie services Play videos, songs, or pictures from your computer or home network Plays any non-DRM video, music, and photos and media from anywhere on the Internet The device features the following input/output and […]

September 6, 2010November 25, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

List the dynamic libraries used by a program

In order to know which dynamic libraries a particular binary is using, just type ldd. For example with busybox: sh-3.00# ldd /bin/busybox /bin/busybox: is setuid libcrypt.so.0 => /lib/libcrypt.so.0 (0x2aaed000) libm.so.0 => /lib/libm.so.0 (0x2ab41000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x2ab9c000) libc.so.0 => /lib/libc.so.0 (0x2abeb000) ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x2aaa8000) Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

September 2, 2010September 5, 2010 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Samsung Galaxy Tab Video

As blogged previously, Samsung released its Android Tablet at IFA in Berlin today. Here’s a video to show off the Samsung Galaxy Tab including the TV commercial at the end: That looks really good until you look at the price tag: 799 Euros. Here are the full specs of this Android tablet: Network: 2.5G (GSM/ GPRS/ EDGE) : 850 / 900 / 1800 / 1900 MHz 3G (HSUPA 5.76Mbps, HSDPA 7.2Mbps) : 900 / 1900 / 2100 MHz OS: Android 2.2 (Froyo) Display: 7.0 inch TFT-LCD, WSVGA (1024 x 600) Processor: Cortex A8 1.0GHz (ARM) Application Processor with PowerVR SGX540 Camera: 3 MP Camera with Auto-Focus and LED Flash 1.3MP front camera for Video Telephony Mini-HDMI connector with 1080p video output. Docking Station GPS (A-GPS) Value-added Features: Android Market™ and Samsung Apps for more applications and contents Readers Hub, Media Hub, Music Hub, Social Hub (Facebook/Google/Outlook) Adobe Flash 10.1 player […]

August 29, 2010November 25, 2010 by Jean-Luc Aufranc (CNXSoft) - No Comments

Digital Signage: Implementing a smooth scrolling text

Many digital signage hardware feature scroll text. However, in many cases the scrolling text is either not smooth, sometimes teared or very slow. It may depends on the performance of the hardware used but also on the implementation of the software. Once easy way to implemented scrolling text is just to redraw the text again and again at different position. However, this is very slow and yields poor results unless maybe you have a Truetype accelerator or similar hardware font accelerator. The next step is then to convert the text into pixmaps. This can either be done in the digital signage manager software (Windows PC/MAC or Linux based) or the digital signage player. Doing so in the latter makes it much more flexible. So you may create 2 pixmaps whose width and length match the region to be displayed, you write the text on those 2 pixmaps, then simply move […]

August 22, 2010December 13, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Quick guide to install Samba/CIFS in Linux

You may want to install Samba/CIFS in a Linux host to share files with other Windows computer or to use as a media server with a networked media player. If samba is missing, install it in the host machine (foomachine):

sudo yum install samba

1	sudo yum install samba

Create a new smb user:

/sbin/smbpasswd -a foouser

1	/sbin/smbpasswd -a foouser

Start / check status / restart samba service:

/etc/rc.d/init.d/smb start / status / restart

1	/etc/rc.d/init.d/smb start / status / restart

To make samba service run automatically at startup:

/sbin/chkconfig smb on

1	/sbin/chkconfig smb on

Type \\foomachine\foouser in Windows Explorer and type the username foouser and the password to access your Linux files. To add other directories to share with samba, edit /etc/samba/smb.conf Resource: http://www.cpqlinux.com/samba.html Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com