OpenWrt Category - Page 7 of 43 - CNX Software

June 5, 2024June 4, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PCIe to 5G HAT+ for Raspberry Pi 5 takes SIMCom and Quectel 5G modules

Waveshare PCIe to 5G/4G/3G HAT+ for Raspberry Pi 5 is a PCIe Gen 2 x1 to M.2 HAT+ designed to take 5G modules from SIMCom and Quectel and a Nano SIM card. The kit ships with a 4-in-1 PCB antenna, associated cables, a heatsink, a 4cm 16-pin PCIe FPC cable, a 40-pin female header, and a fixture set for mounting. We had previously written about the SixFab 5G HAT for the Raspberry Pi 5 with a Quectel RM502Q-AE M.2 module, but this specific kit still relies on the USB 3.0 interface. The Waveshare kit is the first 5G kit using the PCIe interface from the Raspberry Pi 5 interface and it is offered with Quectel RM502Q-AE, RM530N-GL, RM520N-GL, or SIMCom SIM8262E-M2, SIM8262A-M2 M.2 3042/3052 modules. Waveshare PCIe to 5G HAT+ specifications: M.2 Key B socket for 3042/3052 5G modules with PCIe interface 16-pin PCIe FPC connector directly connected to the […]

June 4, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

GCT GDM7243SL is a dual-core RISC-V 5G/4G LTE modem with support for NTN, NB-IoT, LTE Cat M, Cat1bis, Cat1 and/or Cat4

CT Semiconductor Holding GDM7243SL is a multi-mode 5G/4G LTE IoT modem with two 400 MHz RISC-V cores capable of operating in Cat 4, Cat 1bis, Cat M1, Cat NB1/NB2 (NB-IoT) and non-terrestrial networks (NTN) in order to work anywhere on earth. If I remember correctly, one of the first commercial RISC-V SoCs I saw was a storage controller from Western Digital introduced in 2019. But since then, we’ve seen more and more RISC-V chips come to market from entry-level microcontrollers up to Linux-capable application processors, and even chips for datacenters that are out of the scope of topics covered on CNX Software. But with GDM7243SL, I think it’s the first time I’ve encountered a RISC-V modem, so let’s have a closer look. There are two models, the GDM7243SL1 and GDM7243SL2, with different memory and storage options, and the L1 lacks support for LTE Cat 4. GDM7243SL key features: CPU 400 […]

June 3, 2024July 30, 2024 by Debashis Das - 3 Comments

Quectel SG368Z WiFi 5 and Bluetooth 4.2 smart module is built around Rockchip RK3568 SoC

The Quectel SG368Z Smart Module is an all-in-one hardware package built around a Rockchip RK3568 AI SoC that combines computing, graphics, storage, and connectivity in a compact form factor. The LGA module offers WiFi 5 and Bluetooth 4.2 connectivity, dual gigabit Ethernet networking, various video output options (HDMI, LVDS, RGB, MIPI, eDP), USB, PCIe, and many other features making it suitable for applications like smart homes, wearables, and industrial automation. Previously we have seen Quectel introduce various communication modules like the Quectel BG95-S5 5G, the Quectel KG200Z LoRa the Quectel RG255G RedCap IoT Module, and the Quectel CC660D-LS IoT-NTN module, but this is the first time we have seen Quectel release a Smart Module which can be certainly be considered as a SoM in a LGA package. Quectel SG368Z Smart Module specifications: SoC – Rockchip RK3568 CPU – Quad-core Cortex A55 processor at up to 2.0 GHz GPU – Mali G52 […]

April 17, 2024April 16, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

RAKwireless launches SX1303 based M.2 LoRaWAN concentrator modules and full-duplex gateway

Wislink M.2 2242 2280 LoRaWAN SX1303 concentrator modules

RAKwireless has recently introduced two new LoRaWAN products with the RAK5166/67 WisLink M.2 3042/2280 concentrator module based on the Semtech SX1303 RF transceiver and the RAK7285 WisGate Edge Ultra Full-Duplex gateway for high-density network deployments, particularly for smart city infrastructure, metering applications, and other scenarios requiring reliable two-way communication at scale. RAK5166 and RAK5167 M.2 3042 and 2280 LoRaWAN concentrator modules RAK5166/RAK5167 specifications: Wireless Semtech SX1303 baseband processor with 8 x 8 channels LoRa packet detectors, 8x SF5-SF12 LoRa demodulators, 8x SF5-SF10 LoRa demodulators, one 125/250/500 kHz high-speed LoRa demodulator, and one (G)FSK demodulator Tx power up to 27 dBm Rx sensitivity down to -139 dBm @ SF12, BW 125 kHz Supports global license-free frequency band (EU868, IN865, RU864, US915, AU915, KR920, AS923-1, AS923-2, AS923-3, AS923-4) Listen Before Talk (LBT) support Fine Timestamp Built-in ZOE-M8Q GPS module (optional) 2x MHF4 IPEX connectors for the LoRa and GNSS (optional) antennas Host […]

March 30, 2024March 30, 2024 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

INCTEL N100 fanless mini PC and micro firewall appliance comes with four 2.5GbE ports using Intel i226V controllers

INCTEL N100, also sold under the Partaker brand, is a fanless mini PC and “micro firewall appliance” powered by an Intel Processor N100 CPU and equipped with four 2.5GbE ports all using Intel i226V. It has features similar to the tiny, actively cooled iKOOLCORE R2 Alder Lake-N mini PC that combines Intel and RealTek controllers, but the INCTEL model has a larger yet thinner design. The device supports up to 16GB DDR5 memory, can take an M.2 NVMe SSD and/or a 2.5-inch SATA drive for storage, and also provides two video outputs through HDMI and DisplayPort, as well as a few USB ports, an RJ45 console port, and optional support for WiFi and 4G LTE connectivity. INCTEL N100 specifications: SoC- Intel Processor N100 quad-core Alder Lake N-series processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel UHD graphics @ up to 750 MHz; TDP: 6W System Memory […]

March 19, 2024March 18, 2024 by Tomisin Olujinmi - 12 Comments

TinyVision is a compact Allwinner V851S/V851S3-powered Linux board for vision-based applications

Unrelated to tinyVision.ai, the TinyVision development board is a computer vision board from Chinese developer YuzukiTsuru powered by either the Allwinner V851S or the V851S3 and is billed as an “ultimate all-in-one solution for Linux motherboards, IPCs, servers, routers, and more.” It packs features such as a Cortex-A7 core running at 1200MHz, a 2-channel MIPI CSI input, and an independent image signal processor (ISP) capable of a maximum resolution of 2560 x 1440 in a compact form factor. TinyVision specifications: Processor – Allwinner V851SE / V851s3 with Cortex-A7 core @ 1200MHz and RISC-V E907GC core @ 600MHz NPU: 0.5TOPS (tera operations per second) @ INT8 precision Memory – 64MB DDR2 (V851se), 128MB DDR3L (V851s3) Storage – MicroSD card slot (supports UHS-SDR104), onboard SD NAND via SPI Display – 2-lane MIPI DSI (1280 x 720 @ 60fps), RGB LCD (320 x 240 @ 60fps) Video Input ISP with a maximum resolution […]

March 12, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Banana Pi launches $30 WiFi 6 router with Triductor TR6560 SoC running a fork of OpenWrt

When Banana Pi started to sell the low-cost Banana Pi BPI-WiFi 6 router board powered by Triductor TR6560 dual-core SoC and TR5220 WiFi 6 chipset, I mentioned they should probably offer a complete system with enclosure and antennas for this to become more popular. It took a while, or about nine months to be precise, but the Banana Pi BPI-WiFi 6 router is now available with a plastic enclosure, four external antennas, an Ethernet cable, and a power supply for $30.90 plus shipping on Aliexpress. Banana Pi BPI-WiFi 6 router specifications: SoC – Triductor TR6560 dual-core Arm Cortex-A9 processor @ 1.2 GHz with LSW (Line-Card Switching) and hardware NAT up to 5 Gbps WiFi chipset – Triductor TR5220 WiFi 6 chipset System Memory – 512 MB DDR3 Storage – 128MB SPI NAND flash Networking 1x Gigabit Ethernet WAN port with optional PoE support 3x Gigabit Ethernet LAN ports 2.4 GHz […]

March 5, 2024March 4, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Industrial OpenWrt gateway features MediaTek MT7628 SoC, WiFi, LTE, and GNSS connectivity

Atreyo AG-702 industrial OpenWrt gateway

Atreyo AG-702 is an industrial OpenWrt gateway based on the MT7628 processor with dual Ethernet and WiFi connectivity as well as a built-in LTE and GNSS modem supporting two SIM cards. The gateway is equipped with isolated RS485 and RS232 interfaces, two digital isolated inputs, one relay output, and a USB host port that can be used to connect a flash drive or USB converters to various other interfaces. It is housed in an anodized aluminum enclosure and supports a wide 14-60V DC input range suitable for industrial settings. Atreyo AG-702 specifications: SoC – MediaTek MT7628 MIPS processor at 580MHz System Memory – 256MB Storage – 32MB eMMC flash + 512MB NAND flash with ExtRoot support (overlay) Networking 100Mbps Ethernet WAN port 100Mbps Ethernet LAN port LTE/GPRS with dual SIM, 1x external antenna 2.4 GHz WiFi with 1x external antenna GNSS with active antenna support USB – 1x USB 2.0 […]