Operating Systems Category - Page 342 of 1031 - CNX Software

December 11, 2019July 5, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

RISC-V based PolarFire SoC FPGA and Devkit Coming in Q3 2020

Microsemi unveiled PolarFire FPGA + RISC-V SoC about one year ago, but at the time, development was done on a $3,000 platform with SiFive U54 powered HiFive Unleashed board combined with an FPGA add-on board from Microsemi. I’ve now been informed that Microchip has announced its Linux-capable PolarFire FPGA+RISC-V SoC would start shipping in Q3 2020 at the RISC-V summit and that a development kit will be sold for a few hundred dollars. PolarFire SoC FPGA PolarFire SoC FPGA key features and specifications: Mid-Range FPGA optimized for Low Power High-speed serial connectivity with built-in multi-gigabit/multi-protocol transceivers from 250 Mbps to 12.7 Gbps Up to 461k logic elements consisting of a 4-input Look-Up Table (LUT) with a fracture-able D-type flip-flop Up to 31.6 Mb of RAM Power optimized transceivers Up to 1420 18 × 18 multiply-accumulate blocks with hardened pre-adders Integrated dual PCIe for up to ×4 Gen 2 Endpoint […]

December 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Google ADT-3 is a Developer-Focused TV Box for Android TV on Android 10

Google ADT-3 Android TV 10 Developer-Kit

Back in 2014, Google killed Google TV and announced Android TV, and as a result, introduced ADT-1, the first developer kit specifically designed for Android TV. Since then ADT-2 was introduced in 2018 in an HDMI stick form factor, and now the company has announced the launch of Android TV on Android 10 together with ADT-3 devkit targetting Android TV app development for Android 10. The “developer kit” just looks like a standard TV box, although It’s really tiny and comes with what looks like a voice remote control. Google did not provide the full specifications, but ADT-3 is equipped with a quad-core Cortex A53 processor coupled with 2GB DDR3 memory, and supports 4Kp60 HDR video playback and output via an HDMI 2.1 output port. That probably means the box is powered by an Amlogic S905X2 processor since few other TV box SoCs combine 4x A53 cores with HDMI 2.1. […]

December 11, 2019 by Stephen Vicinanza - 7 Comments

EEPD Launches AMD Ryzen Embedded NUC Boards & Mini PCs

EEPD SBC Profive follows embedded NUC Standard Electronic Equipment Production and Distribution, also known as EEPD, has just released its latest Embedded SBCs based on the AMD Ryzen Embedded R1000 and V1000 platforms. Respectively they are the SBC Profive NUCR and NUCR both designed for industrial uses. The NUCv has 4 variants with 2 different V1000 series CPUs to choose from, while the NUCR has two R1000 variants. eNUC and Integrated Graphics All variations and types of SBCs and BoxPCs use the embedded NUC standard utilizing the AMD Ryzen embedded platform and series with Radeon Vega Graphics integrated into the system. SBC Profive NUCR specifications AMD Series R1000 Processors – R1606G / R1505G Integrated GPU – AMD Radeon Vega 3 Graphics Up to 32 GB dual-channel DDR4 memory 2x Gigabit Ethernet ports (Intel I210 with IEEE1588) 1x MicroSD card slot 3x M.2 Type B, Type E, Type M sockets M.2 SATA […]

December 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SiFive Learn Inventor is a Wireless RISC-V Development Kit Inspired by BBC Micro:bit

SiFive Learn Inventor is a RISC-V educational board partially inspired by BBC Micro:bit board with the same crocodile clip-friendly edge connector, and an LED matrix. The board is also fully qualified to work with the Amazon FreeRTOS real-time operating system. Shaped in the form of a hand, the board features SiFive FE310 RISC-V processor found in the SiFive HiFive1 board, as well as ESP-WROOM-32 WiFi + Bluetooth module. SiFive Learn Inventor specifications: SoC – SiFive FE310-G003 32-bit RISC-V (RV32IMAFC) processor @ 150 MHz with 64KB of internal SRAM Storage – 512 KB flash “Display” – 6×8 “widescreen” array of RGB LEDs with 262,000 colors each; LEDs can expand off-board onto external arrays via the edge connector Wireless Connectivity – 802.11b/g/n WiFi 4 (2.4GHz) and Bluetooth 4.2 LE via an ESP32 module (ESP-WROOM-32) USB – 1x Micro USB port for power and programming/debugging Expansion A/D Converters (four) accessed via on-board coprocessor […]

December 10, 2019December 10, 2019 by Stephen Vicinanza - 12 Comments

FreeMesh WiFi 5 Mesh Network Router Runs OpenWrt

FreeMesh W1326 LTE Router Mesh Network Access FreeMesh has launched an open-source mesh router, the WE1326 LTE FreeMesh Router (included are two nodes) that runs OpenWrt open-source operating system. Open Source and “Hackable” Mesh System FreeMesh enters the mesh market with source code posted on Gitlab, a user-hackable/customizable mesh in other words. FreeMesh uses OpenWrt – the OpenWrt project is a Linux operating system aimed at embedded systems. The focus is on removing the need for a static firmware, where there is only one option for software for the hardware being purchased. The Offerings and Markets The company is targeting the residential market, where most mesh systems are almost double the $150.00 price tag of the FreeMesh. It is reported that there are other ZBT WE826-WD based mesh routers on the market, check out the LinuxGizmos.com article for more information. FreeMesh Specifications FreeMesh Router CPU Dual Core 880MHz MediaTek MT7621AT ROM SPI […]

December 9, 2019December 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Testing NVIDIA Jetson Nano Developer Kit with and without Fan

A few weeks ago I received NVIDIA Jetson Nano for review together with 52Pi ICE Tower cooling fan which Seeed Studio included in the package, and yesterday I wrote a getting started guide showing how to setup the board, and play with inference samples leveraging the board’s AI capabilities. I’ll now test the board with the stock heatsink in both 5W and 10W modes, and see if thermal throttling does occur, and then I’ll fit the tower cooling fan to find out if we can extract more performance that way and how much lower the CPU temperature is. Jetson Nano Stress Tests with Stock Heatsink Let’s install SBC-Bench testing utility,

wget https://raw.githubusercontent.com/ThomasKaiser/sbc-bench/master/sbc-bench.sh
chmod +x sbc-bench.sh

1 2	wget https://raw.githubusercontent.com/ThomasKaiser/sbc-bench/master/sbc-bench.sh chmod +x sbc-bench.sh

check it’s properly installed,

sudo ./sbc-bench.sh -m
Time        CPU    load %cpu %sys %usr %nice %io %irq   Temp
15:05:06:  922MHz  0.05   5%   1%   2%   0%   0%   0%  35.0°C
15:05:11:  922MHz  0.13   3%   1%   1%   0%   0%   0%  35.0°C
15:05:16:  922MHz  0.12   3%   1%   1%   0%   0%   0%  34.8°C

sudo ./sbc-bench.sh -m

Time CPU load %cpu %sys %usr %nice %io %irq Temp

15:05:06: 922MHz 0.05 5% 1% 2% 0% 0% 0% 35.0°C

15:05:11: 922MHz 0.13 3% 1% 1% 0% 0% 0% 35.0°C

15:05:16: 922MHz 0.12 3% 1% 1% 0% 0% 0% 34.8°C

and run it in 5W mode:

sudo nvpmodel -m 1

sudo ./sbc-bench

sbc-bench v0.6.9

Memory performance:
memcpy: 3685.3 MB/s 
memset: 8555.4 MB/s 

7-zip total scores (3 consecutive runs): 2877,2885,2854

OpenSSL results:
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-128-cbc     284837.64k   525113.11k   639412.05k   706251.09k   728449.02k   729841.66k
aes-128-cbc     284316.13k   525028.93k   634287.70k   704675.84k   728088.58k   728973.31k
aes-192-cbc     262002.90k   458230.17k   544725.93k   588999.68k   604075.35k   604607.83k
aes-192-cbc     261583.66k   458583.96k   538986.92k   588138.84k   602303.15k   604067.16k
aes-256-cbc     247370.60k   405101.35k   466444.29k   501432.32k   512816.47k   513370.79k
aes-256-cbc     247650.51k   405270.40k   469783.72k   502266.54k   513187.84k   512977.58k

Full results uploaded to http://ix.io/23rg. Please check the log for anomalies (e.g. swapping
or throttling happenend) and otherwise share this URL.

sudo nvpmodel -m 1

sudo ./sbc-bench

sbc-bench v0.6.9

Memory performance:

memcpy: 3685.3 MB/s

memset: 8555.4 MB/s

7-zip total scores (3 consecutive runs): 2877,2885,2854

OpenSSL results:

type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes

aes-128-cbc 284837.64k 525113.11k 639412.05k 706251.09k 728449.02k 729841.66k

aes-128-cbc 284316.13k 525028.93k 634287.70k 704675.84k 728088.58k 728973.31k

aes-192-cbc 262002.90k 458230.17k 544725.93k 588999.68k 604075.35k 604607.83k

aes-192-cbc 261583.66k 458583.96k 538986.92k 588138.84k 602303.15k 604067.16k

aes-256-cbc 247370.60k 405101.35k 466444.29k 501432.32k 512816.47k 513370.79k

aes-256-cbc 247650.51k 405270.40k 469783.72k 502266.54k 513187.84k 512977.58k

Full results uploaded to http://ix.io/23rg. Please check the log for anomalies (e.g. swapping

or throttling happenend) and otherwise share this URL.

The temperature never went over 44.5°C, and no throttling occurred. tegrastats during 7-zip multi-core test:

CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@43.5C PMIC@100C GPU@43.5C AO@52.5C thermal@43.5C POM_5V_IN 3348/2567 POM_5V_GPU 0/0 POM_5V_CPU 1549/912
RAM 1211/3956MB (lfb 515x4MB) SWAP 0/1978MB (cached 0MB) IRAM 0/252kB(lfb 252kB) CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@44C PMIC@100C GPU@43.5C AO@52C thermal@43.5C POM_5V_IN 3348/2568 POM_5V_GPU 0/0 POM_5V_CPU 1549/912
RAM 1239/3956MB (lfb 508x4MB) SWAP 0/1978MB (cached 0MB) IRAM 0/252kB(lfb 252kB) CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@44C PMIC@100C GPU@43.5C AO@52.5C thermal@43.5C POM_5V_IN 3348/2569 POM_5V_GPU 0/0 POM_5V_CPU 1549/913
RAM 1265/3956MB (lfb 502x4MB) SWAP 0/1978MB (cached 0MB) IRAM 0/252kB(lfb 252kB) CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@43.5C PMIC@100C GPU@43.5C AO@52.5C thermal@43.5C POM_5V_IN 3348/2571 POM_5V_GPU 0/0 POM_5V_CPU 1510/914

CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@43.5C PMIC@100C GPU@43.5C AO@52.5C thermal@43.5C POM_5V_IN 3348/2567 POM_5V_GPU 0/0 POM_5V_CPU 1549/912

RAM 1211/3956MB (lfb 515x4MB) SWAP 0/1978MB (cached 0MB) IRAM 0/252kB(lfb 252kB) CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@44C PMIC@100C GPU@43.5C AO@52C thermal@43.5C POM_5V_IN 3348/2568 POM_5V_GPU 0/0 POM_5V_CPU 1549/912

RAM 1239/3956MB (lfb 508x4MB) SWAP 0/1978MB (cached 0MB) IRAM 0/252kB(lfb 252kB) CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@44C PMIC@100C GPU@43.5C AO@52.5C thermal@43.5C POM_5V_IN 3348/2569 POM_5V_GPU 0/0 POM_5V_CPU 1549/913

RAM 1265/3956MB (lfb 502x4MB) SWAP 0/1978MB (cached 0MB) IRAM 0/252kB(lfb 252kB) CPU [100%@1428,100%@1428,off,off] EMC_FREQ 3%@1600 GR3D_FREQ 0%@76 APE 25 PLL@41.5C CPU@43.5C PMIC@100C GPU@43.5C AO@52.5C thermal@43.5C POM_5V_IN 3348/2571 POM_5V_GPU 0/0 POM_5V_CPU 1510/914

Only two Cortex-A57 cores are used even under load, and power […]

December 9, 2019 by Stephen Vicinanza - No Comments

Congatec Conga-SMX8-Nano SMARC 2.0 CoM Features NXP i.MX 8M Nano Processor

Congatec Announces Ultra-Low-Power SMARC 2.0 CoM Congatec has come out with a new CoM, the Conga-SMX8-Nano that carries up to 4x ARM Cortex-A53 and 1x Cortex-M7 cores with a full spectrum of options. The SMARC 2.0 module can meet ultra-low-power requirements, offers low cost, as well as high-level performance. Background Information Background on NXP i.MX 8M Nano processors and modules have been reported in our report about iWave’s iW-RainboW-G34M-SM SoM and the introduction of the i.MX 8M Nano ARM Cortex-A53 and M7 processor to the market. A Board for the Industry The intention here is to develop a board that has high performance, ultra-low power requirements and can reach high volumes at low cost. The modules are scalable to the conga-SMX-8-Mini CoM, with options for a multitude of setups across types. Example Uses for conga-SMX8-Nano The company offers the example of a complex medical user interface that engineers might want […]

December 8, 2019February 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

ROCK Pi SATA HAT Targets ROCK Pi 4 & Raspberry Pi 4 NAS

Radxa ROCK Pi 4 is a single board computer (SBC) powered by Rockchip RK3399 hexa-core processor and inspired by Raspberry Pi 3 Model B+. The company has now designed ROCK Pi SATA HAT expansion board to design 4-bay NAS based on Raspberry Pi 4 and ROCK Pi 4. There are 3 models with support for 2, 4 or 5 drives: Dual/Quad SATA HAT connected over two USB 3.0 ports and working with both boards Penta SATA HAT connected over PCIe and compatible with ROCK Pi 4 only ROCK Pi Dual/Quad SATA HAT Specifications: 2x or 4x SATA connectors supporting 2.5″ or/and 3.5″ HDD/SSD 2x USB 3.0 port to connect to RPi 4 via one or two JMS561 USB to SATA controllers Storage Features – HDD suspend mode, UASP, software RAID 0/1/5 Misc Fan and heatsink header for Raspberry Pi 4 CPU cooling Optional PWM control fan for HDD heat dispatching […]