Operating Systems Category - Page 367 of 1032 - CNX Software

August 5, 2019August 5, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Pine64 SoEdge-RK1808 AI Module Delivers 3.0 TOPS via Rockchip RK1808 SoC

SOPINE Model A Baseboard + SoEdge-RK1808

A few weeks ago, Ameridroid reported Pine64 would soon launch SoRock and SoEdge systems-on-module, but at the time there was virtually no info except SoRock would be likely based on either RK3328 or RK3399 and work on the existing Clusterboard, while SoEdge would be an AI Neural module for Artificial Intelligence tasks, with up to 3 TeraFLOPS of performance. I did not write about it at the time, simply because there was so little information, but this morning I’ve just received some photos of SoEdge-RK1808 module fitted to a baseboard that looks to be SOPINE Model “A” carrier board. SoEdge-RK1808 SoM Let’s try to derive the specifications from the photos even though some components appear to be blurred out or just unclear: SoC – Rockchip RK1808 dual-core Cortex-A35 processor with 3.0 TOPS NPU (Neural Processing Unit) System Memory – 2GB RAM (2x 8GBit Micro DDR4-2400) but limited PC-2133 Storage – […]

August 4, 2019August 11, 2021 by Jean-Luc Aufranc (CNXSoft) - 57 Comments

Amlogic S912 vs Amlogic A311D/S922X-B Benchmarks Comparison

A few days ago we compared Amlogic A311D to Rockchip RK3399 since both the top-of-the-line processors from Amlogic and Rockchip are currently available. Rockchip RK3588 will even be faster, but we need to wait until Q1 2020 at least before it becomes available, and delays are not unheard of, so I’d expect it may take about one year before I can get my hands on a sample. Another comparison is against Amlogic S912, the previous high-end processor from the company. Amlogic A311D and S922X-B are newer and will be faster but it’s interesting to find out just how much. Note the Amlogic S922X found in ODROID-N2 is clocked at a lower speed compare to A311D/S922X-B, so performance will be somewhat lower. Since I recently benchmarked Khadas VIM3 with Amlogic A311D processor, I decided to dust off my old Khadas VIM2 Amlogic S912 development board, fit it a large heatsink, install […]

August 3, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Android Gaming on Khadas VIM3 SBC (Video)

I started playing with Khadas VIM3 Basic SBC powered by Amlogic A311D processor and 2GB RAM, and noticed Android benchmarks, especially 3D graphics were significantly better (40% improvement) than the ones of Rockchip RK3399. So I decided it may be interesting to show Android gaming on the single-board computer, and installed the latest version of Android 9.0 with Google Play store. Finally I connected the RF dongle of Tronsmart Mars G01 wireless gamepad, as well as USB keyboard and mouse to get some fun. Since the board only has two USB type-A ports, I also inserted MINIX NEO S2 USB-C + SSD hub to connect the gamepad RF dongle. Then I tried to install and play four games Beach Buggy Racing Installed via Google Play Played with Tronsmart gamepad. Perfectly smooth with max graphics settings. Similar to other TV boxes or boards. Riptide GP2 Installed via Amazon Store Played with […]

August 3, 2019 by Stephen Vicinanza - No Comments

Actcast Combines IFTTT-like Service with AI and Raspberry Pi 3 / Zero

In a report on April 30, 2017, Idein had developed GPGPU accelerated object recognition for the Raspberry Pi platform. That development led to the beta release of the ActCast IoT platform, which was announced on July 29, 2019, and uses deep learning algorithms for object and subject recognition. The program is for use with IoT and AI. The idea is to increase performance and link the system to the web for even more solutions. What it Does The use of physical world information in IoT projects has many applications. Such as a doorbell that sees a person, can then recognize the person. Ultimately letting the user know over the web through a smartphone, the person should be let in. And then the system unlocks the door. So Actcast is a bit like IFTTT with artificial intelligence / computer vision capabilities. Edge Computing Bringing the source of data closer to the […]

July 31, 2019August 4, 2019 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

BeagleBone Green Gateway SBC Adds Octavo OSD3358 SiP, Ethernet, and a DC Jack

BeagleBone Green Wireless was launched in 2016 as an alternative to the official BeagleBone Green with WiFi & Bluetooth connectivity, and some extra USB ports meaning the Ethernet port had to go. The Linux SBC was based on Texas Instruments Sitara AM3358 processor and a 512 MB RAM chip. Seeed Studio has been working on an update of the board named BeagleBone Green Gateway that combines the processor, the RAM chip, and more components into one thanks to Octavo Systems OSD3358 SiP. The new board also adds Ethernet, a DC jack for power instead of just relying on micro USB, and an I2C RTC chip and battery. BeagleBone Green Gateway specifications with changes highlighted in bold: SiP – Octavo Systems OSD3358 with Texas Instruments AM3358 Arm Cortex-A8 processor @ 1.0 GHz, 2×32-bit 200-MHz programmable real-time units (PRUs), 3D graphics accelerator, 512MB DDR3 SDRAM, 4KB EEPROM, and integrated power management Storage […]

July 31, 2019 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Orange Pi Zero LTS SBC Launched for $8.49 and Up

Orange Pi Zero LTS is an update to Orange Pi Zero Allwinner H2+ board with the same specifications, but tweaks to the hardware that Shenzhen Xunlong Software claims lower power consumption and reduce heat. The SBC supports Armbian’s Debian and Ubuntu images, and best suited for headless applications that require network connectivity via Ethernet and/or WiFi such as smart speakers. The board also features one USB port, and two I/O headers for expansion. The good news is that you can now buy Orange Pi Zero LTS for the same price as the original model, namely $8.49 for the 256MB RAM version, and $10.49 for the 512MB model$10.49 for the 512MB model, excluding shipping costs ($4.73 to my location). Here’s a reminder of Orange Pi Zero LTS (v1.5) specifications: SoC – Allwinner H2+ quad-core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 256 to […]

July 30, 2019July 30, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Librem 5 Linux Smartphone Specifications Finalized

If you were interested in purchasing, or more exactly pre-ordering, a privacy-focused, open source Linux smartphone with clearly defined hardware specifications, Purism Librem 5 was not quite for you. Until today that is, as while the company did not commit to exact specifications at the beginning of the project, Purism has now revealed the full specifications of Librem 5 Linux smartphone. Librem 5 specifications: SoC – NXP i.MX8M quad-core Cortex A53 @ up to 1.5GHz, Cortex-M4 real-time core, 3G GPU with OpenGL/ES 3.1, Vulkan, OpenCL 1.2 support System Memory – 3GB RAM Storage – 32GB eMMC flash, MicroSD slot up to 2 TB Display- 5.7″ IPS TFT touchscreen with 1440×720 resolution Connectivity Cellular Option 1 – Gemalto PLS8 3G/4G modem w/ single sim on replaceable M.2 card Option 2 – Broadmobi BM818 (made in China) nanoSIM tray Dual-band 802.11a/b/g/n WiFi 4, Bluetooth 4.0 GPS – Teseo LIV3F GNSS Cameras – […]

July 30, 2019July 30, 2019 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

“New” Allwinner H603 Processor Shows Up in X96H Low-cost TV Box

A little while ago, we started to see Rockchip RK3318 TV boxes that appeared to have the same specifications as Rockchip RK3328 based devices. We later learned RK3318 was a cost-down version of RK3328 but failed to get any details about the lower-cost as we were informed Rockchip did not really want to advertise the cheaper model. It appears Allwinner may have done something similar with Allwinner H6 processor, as we’ve started to see an Allwinner H603 processor shows up in X96H TV box on Aliexpress and GearBest with price starting at around $26.99 shipped in 2GB RAM + 16GB storage configuration, and going up to $40.99 with 4GB RAM, 64GB flash, and dual-band WiFi & Bluetooth connectivity. X96H TV box specifications: SoC – Allwinner H603 quad-core Arm Cortex-A53 @ 1.5 GHz with Arm Mali-T720 GPU System Memory / Storage Configurations 2GB DDR3 + 16GB eMMC flash + microSD slot […]