Ubuntu Category - Page 70 of 196 - CNX Software

February 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Fitlet3 is a compact, fanless Elkhart Lake mini PC for IoT and industrial applications

Fitlet3 fanless mini PC based on a choice of three Atom or Celeron Elkhart Lake processors is an upgrade to the Compulab Fitlet2 mini PC introduced in 2017 with Apollo Lake processors. Designed to be used as a fanless industrial mini PC or an IoT gateway, Fitlet3 comes with up to 32GB RAM, supports SATA and NVMe storage, offers two 4K video outputs, up to four Gigabit Ethernet ports, optional WiFi 6E, Bluetooth 5.2, and/or 4G/5G cellular connectivity, as well as a wide range 7V to 42V power input. Fitlet3 specifications: Elkhart Lake SoC (one or the other) Intel Atom x6425E quad-core processor @ 2.0 GHz / 3.0 GHz (Boost frequency); TDP: 12 W Intel Celeron J6412 quad-core processor @ 2.0 GHz/ 2.6 GHz; TDP: 10 W Intel Atom x6211E dual-core processor @ 1.3 GHz / 3.0 GHz ; TDP: 6 W System Memory – Up to 32 GB DDR4 […]

February 7, 2022June 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

CHUWI LarkBox X mini PC is powered by an AMD Ryzen 7 3700U mobile processor

CHUWI LarkBox X is an affordable mini PC based on a 15W AMD Ryzen 7 3700U mobile processor coupled with 8GB of RAM, a 256GB NVMe SSD, dual Gigabit Ethernet, 4K video output, and more. Contrary to the earlier Celeron-based LarkBox and LarkBox Pro palm-sized mini PCs, the LarkBox X comes with a larger form factor providing additional ports and possibly better cooling for the more performant AMD processor. LarkBox X specifications: SoC – AMD Ryzen 7 3700U quad-core/eight-thread processor @ 2.30GHz / 4.0GHz (Turbo) with Radeon RX Vega 10 Graphics; 15W TDP System Memory – 8GB DDR4, dual channels via 2x 260-pin DDR4 SO-DIMMs (upgradeable up to 32GB RAM) Storage – 256GB NVMe M.2 2280 SSD (PCIe 3.0) upgradable up to 2TB Video Output 1x HDMI 2.0 up to 4Kp60 1x DisplayPort up to 4Kp60 1x USB Type -C up to 4Kp30 with DisplayPort Alt. mode Three independent displays […]

February 4, 2022 by Ian W MORRISON (Linuxium) - 5 Comments

Beelink GTi11 modding – PCIe Gen 4.0 M.2 slot, tweaking power limits, and eGPU

Previously I reviewed Beelink’s new GTi11 Intel Tiger Lake mini PC running Windows 11 and Ubuntu 20.04, so in this final part of the review, I’ll cover in more detail some of the features only briefly highlighted before. Specifically, I’m going to look at the PCIe Gen 4.0 M.2 slot, dabble in ‘overclocking’ and explore eGPU options. Hardware Recap The GTi11 is a 168 x 120 x 39mm (6.61 x 4.72 x 1.54 inches) actively cooled mini PC and the review model has an i5-1135G7 Intel Tiger Lake quad-core 8-thread 2.50 GHz Core processor boosting to 4.20 GHz with Intel’s Xe Graphics. The review model also included a 500GB M.2 2280 NVMe PCIe Gen 3.0 SSD drive with Windows 10 Pro installed, two sticks of 8GB DDR4 3200 MHz memory, a soldered WiFi 6 (or 802.11ax) Intel AX201 chip, and dual 2.5Gb Ethernet ports. Interestingly there are another two key […]

February 1, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

JetHome JetHub D1 is a Linux automation controller based on Amlogic A113X SoC

I discovered JetHome Jethub D1 and Jethub H1 Linux automation controller based on respectively Amlogic A113X and S905X SoCs in Linux 5.16 changelog, as both platforms got upstreamed to mainline Linux. I had never heard of JetHome, a Russian company based in St. Petersburg, nor their products before. Both Jethub D1 & H1 will run either an Armbian-built Ubuntu operating system or Home Assistant Operating System (formerly HassOS), and support Home Assistant (Z2M), Home Assistant (ZHA), and ZIgbee2MQTT. Jethub H1 looks like a TV box with a Zigbee module, while Jethub D1 is a DIN Rail automation controller with plenty of I/Os. Let’s focus on the latter. JetHub D1 specifications: SoC – Amlogic A113x quad-core Cortex A53 processor @ up to 1.5 GHz System Memory / Storage configurations 512MB RAM and 8 GB flash 1GB RAM and 16 GB eMMC flash Connectivity 10/100M Ethernet RJ45 port Dual-band WiFi 5 and […]

January 24, 2022January 25, 2022 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Building a NanoPi M4V2 based All-in-One Linux PC running Armbian (Ubuntu/Debian)

At the end of my review of “RPI All-in-One” PC with Raspberry Pi 4, I noted the system also appeared to be compatible with NanoPi M4V2 single board computer. I’ve now tried it out, and assembling the board inside the 10.1-inch display is even easier than I initially thought. That means I now have a NanoPi M4V2 All-in-One PC running Ubuntu Hirsute or Debian Buster with XFCE desktop environment from Armbian, and most features work including the display and wireless connectivity, but I still have an issue with the touchscreen function. Here are the steps I followed initially: Download Armbian Buster XFCE image from Armbian and flash it to a microSD card with tools like USBimager. Insert the microSD card in the board Install the USB Type-C and HDMI-A adapters in the display. Insert the USB Type-C and HDMI port of the NanoPi M4V2 SBC into the adapters Install the […]

January 23, 2022March 14, 2022 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

MOREFINE M6 – An ultra-thin Jasper Lake mini PC (Crowdfunding)

We’ve seen a fair amount of Jasper Lake mini PCs, and even reviewed one with Beelink U59. MOREFINE M6 stands out due to its size and thickness, being about the size of two smartphones stacked together. The features are also promising with an Intel Celeron N5105 quad-core processor coupled with up to 16 GB RAM, up to 1TB M.2 NVMe SSD, as well as dual 4K video output through HDMI and USB-C ports, a 2.5GbE ports WiFi 6 & Bluetooth 5.2 connectivity, and three USB 3.1 ports. MOREFINE M6 specifications: SoC – Intel Celeron N5105 quad-core Jasper Lake processor @ 2.0GHz / 2.9GHz (Turbo) with Intel UHD graphics 605; 10W TDP System Memory – 8GB or 16GB LPDDR4 Storage – 512GB or 1TB M.2 NVMe 2280 SSD, or 256GB M.2 SATA SSD Video Output 1x HDMI 2.0 port up to 4Kp60 1x DisplayPort Alt Mode via USB-C port up to […]

January 22, 2022January 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Radxa E25 carrier board, 2.5GbE switch, and WiFi 6 router

Radxa E25 2.5GbE switch-Xiaomi AX6000 WiFi 6 router

I’ve just received an early sample of Radxa E25 dual 2.5 GbE carrier board for Radxa CM3 Plus (RK3568) system-on-module, a 2.5GbE TP-Link switch, and Xiaomi AX6000 WiFi 6 + 2.5GbE router. Here’s the back story before looking into the devices. I’ll soon have to review UP Xtreme i11 mini PC with a 2.5GbE port, and after writing about the upcoming ROCK5 Model B SBC with both 2.5GbE and WiFI 6/6E, I realized I should really get some hardware to test 2.5GHz and WiFi 6. So I started to ask what could be the best options for a $200 budget. While thinking about it, I remember Radxa was working on the Radxa E23 board with 2.5GbE, and adding a WiFi 6 USB dongle might be an option. But they told me Radxa E25 would be a better option with two 2.5GbE ports and support for WiFi 6, although that one […]

January 19, 2022February 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

10.1-inch RPI All-in-One PC review with Raspberry Pi 4

A couple of months ago I received “RPI All-in-One”, a 10.1-inch touchscreen display for Raspberry Pi boards, listed the specifications, checked out the package content, installed a Raspberry Pi 4 inside the display before booting my new all-in-one (AiO) PC successfully. I’ve now had time to spend more time with the PC/display and see how it performs under various conditions. I also tested HDMI and USB-C input features with a laptop and mini PC. Fan or fanless operation? After updating Raspberry Pi OS, I ran sbc-bench.sh script together with rpi-monitor to see how the Raspberry Pi 4 with 1GB RAM would perform under load with the (noisy) fan enabled.

sbc-bench v0.9.1

Installing needed tools. This may take some time. Done.
Checking cpufreq OPP. Done (results will be available in 11-15 minutes).
Executing tinymembench. Done.
Executing OpenSSL benchmark. Done.
Executing 7-zip benchmark. Done.
Checking cpufreq OPP. Done (17 minutes elapsed).

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_ADDRESS = "en_GB.UTF-8",
	LC_NAME = "en_GB.UTF-8",
	LC_MONETARY = "en_GB.UTF-8",
	LC_PAPER = "en_GB.UTF-8",
	LC_IDENTIFICATION = "en_GB.UTF-8",
	LC_TELEPHONE = "en_GB.UTF-8",
	LC_MEASUREMENT = "en_GB.UTF-8",
	LC_TIME = "en_GB.UTF-8",
	LC_NUMERIC = "en_GB.UTF-8",
	LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
It seems neither throttling nor frequency capping has occured.

Memory performance:
memcpy: 2595.9 MB/s (0.8%)
memset: 3398.3 MB/s (2.7%)

7-zip total scores (3 consecutive runs): 5556,5650,5565

OpenSSL results:
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-128-cbc      61981.49k    76335.40k    82773.25k    84199.42k    84355.75k    84393.98k
aes-128-cbc      62224.25k    76254.36k    82779.39k    84461.91k    84757.16k    84825.43k
aes-192-cbc      55900.34k    67052.89k    71500.80k    73121.11k    73362.09k    73203.71k
aes-192-cbc      55869.41k    66963.52k    71835.14k    72934.74k    73471.32k    73465.86k
aes-256-cbc      50541.63k    59834.26k    63387.14k    64413.70k    64634.88k    64760.49k
aes-256-cbc      50646.47k    59735.02k    63384.92k    64461.14k    64648.53k    64629.42k

Full results uploaded to http://ix.io/3MfY. 

In case this device is not already represented in official sbc-bench results list then please
consider submitting it at https://github.com/ThomasKaiser/sbc-bench/issues with this line:
| RPi 4 Model B Rev 1.1 / BCM2711 rev B0 | 1500 MHz | 5.10 | Bullseye armhf | 5590 | 62100 | 64690 | 2600 | 3400 | - | [http://ix.io/3MfY](http://ix.io/3MfY) |

sbc-bench v0.9.1

Installing needed tools. This may take some time. Done.

Checking cpufreq OPP. Done (results will be available in 11-15 minutes).

Executing tinymembench. Done.

Executing OpenSSL benchmark. Done.

Executing 7-zip benchmark. Done.

Checking cpufreq OPP. Done (17 minutes elapsed).

perl: warning: Setting locale failed.

perl: warning: Please check that your locale settings:

LANGUAGE = (unset),

LC_ALL = (unset),

LC_ADDRESS = "en_GB.UTF-8",

LC_NAME = "en_GB.UTF-8",

LC_MONETARY = "en_GB.UTF-8",

LC_PAPER = "en_GB.UTF-8",

LC_IDENTIFICATION = "en_GB.UTF-8",

LC_TELEPHONE = "en_GB.UTF-8",

LC_MEASUREMENT = "en_GB.UTF-8",

LC_TIME = "en_GB.UTF-8",

LC_NUMERIC = "en_GB.UTF-8",

LANG = (unset)

are supported and installed on your system.

perl: warning: Falling back to the standard locale ("C").

It seems neither throttling nor frequency capping has occured.

Memory performance:

memcpy: 2595.9 MB/s (0.8%)

memset: 3398.3 MB/s (2.7%)

7-zip total scores (3 consecutive runs): 5556,5650,5565

OpenSSL results:

type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes

aes-128-cbc 61981.49k 76335.40k 82773.25k 84199.42k 84355.75k 84393.98k

aes-128-cbc 62224.25k 76254.36k 82779.39k 84461.91k 84757.16k 84825.43k

aes-192-cbc 55900.34k 67052.89k 71500.80k 73121.11k 73362.09k 73203.71k

aes-192-cbc 55869.41k 66963.52k 71835.14k 72934.74k 73471.32k 73465.86k

aes-256-cbc 50541.63k 59834.26k 63387.14k 64413.70k 64634.88k 64760.49k

aes-256-cbc 50646.47k 59735.02k 63384.92k 64461.14k 64648.53k 64629.42k

Full results uploaded to http://ix.io/3MfY.

In case this device is not already represented in official sbc-bench results list then please

consider submitting it at https://github.com/ThomasKaiser/sbc-bench/issues with this line:

| RPi 4 Model B Rev 1.1 / BCM2711 rev B0 | 1500 MHz | 5.10 | Bullseye armhf | 5590 | 62100 | 64690 | 2600 | 3400 | - | [http://ix.io/3MfY](http://ix.io/3MfY) |

No throttling was detected, and the temperature never exceeded 56°C in a room with an ambient temperature of 26°C. I then disconnect the fan, but it turns out the fan can also be easily disabled in the OSD menu […]