Nordic Semi Category - Page 18 of 20 - CNX Software

March 31, 2017March 31, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Aconno Bluetooth 4.0 & 5 IoT Development Board Features an nRF52832 or nRF52840 Module, an e-Paper Display, Sensors and More

Bluetooth 5 is the latest iteration of Bluetooth with up to four times the speed and twice the range of Bluetooth 4.0 LE, and so far apart from Puck.js and Nordic Semi nRF52840 devkit, I had not seen many Bluetooth 5 IoT modules or boards. Aconno, a German startup, has designed ACD-52832 Bluetooth 4.0 / Thread / ANT+ IoT development board based on their own nRF52832 module, and equipped with some goodies like a black & white e-Paper display, a joystick, sensors, I/Os, etc… They’ve also launched an updated module with Bluetooth 5 using nFR52840 SoC. I don’t have the full details about the new module, but the nRF52832 module and devkit is interesting to look at, especially features should be similar. Aconno ACD-52832 board specifications: Wireless Module – ACN52832 based on Nordic Semi nRF52832 ARM Cortex-M4 @ 64 MHz SoC with Bluetooth Smart, ANT+, Thread, NFC, and 2.4 GHz […]

December 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$24 Winkel Arduino Compatible Board Includes WiFi, Bluetooth, 2.4 GHz RF, and an RTC (Crowdfunding)

There are plenty of Arduino compatible boards with WiFi based on ESP8266 WiSoC going for around $5 to $10, and with ESP32 processor, we are starting to have $15 to $20 boards with both WiFi and Bluetooth, but while ESP-IDF SDK has been progressing nicely, some parts of Bluetooth functionality are still not implemented. Winkel board offers an interesting alternative by offering WiFi, Bluetooth, 2.4GHz ISM, and an RTC for $24. Winkel board specifications: MCU – Microchip/Atmel ATmega128 MCU @ 16 MHz with 128KB flash memory, 4KB SRAM, 4KB EEPROM Connectivity WiFi 802.11 b/g/n via ESP12E module based on ESP8266 Bluetooth 2.0 + EDR via HC-05 module RF Radio – NRF24l01 2.4 GHz ISM radio. (Note: It might be possible to use it for Bluetooth LE connection, see here and there). I/Os (through both Atmel MCU and ESP8266) 38x Digital I/Os 7x PWM Digital I/Os 8x Analog Inputs USB – […]

December 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Nordic Semi Unveils nRF52840 Bluetooth 5 Ready SoC and Development Kit

Nordic Semiconductor nRF52xx Bluetooth and 2.4 GHz solutions are very often found in development kits and low power devices such as wearables, and it’s no surprise that the company introduced a new nRF52840 SoC supporting Bluetooth 5, the new standard promising twice the range, and four times the speed of BLE 4.x, as well as ANT, 802.15.4, 2.4GHz proprietary, and NFC connectivity. Nordic Semi nRF52840 key features and specifications: MCU – 32-bit ARM Cortex-M4 @ 64 MHz with with FPU Memory & Storage – 256 KB RAM, 1MB Flash Connectivity Bluetooth 5-ready multiprotocol radio Bluetooth 5 data rate support: 2 Mbps, 1 Mbps, 500 kbps, 125 kbps 104 dB link budget for Bluetooth low energy -96 dBm sensitivity for Bluetooth low energy Programmable output power from +8 dBm to -20 dBm NFC-A tag on chip Single-ended antenna output (on-chip balun) I/Os USB – Full-speed 12 Mbps USB controller SPI up […]

September 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

BLE Carbon 96Boards IoT Edition Board Runs Zephyr OS

Linaro Connect Las Vegas 2016 is taking place right now, and the organization has some very interesting development, with a new focus on the Internet of Things thanks to the creation of LITE (Linaro IoT and Embedded) segment group that will work on “delivering end to end open source reference software for more secure connected products, ranging from sensors and connected controllers to smart devices and gateways, for the industrial and consumer markets”. The first LITE IoT Reference Platform release to be made in December 2016, but in the meantime, Linaro introduced 96Board IoT specifications, as well as the first compliant board with the launch of Carbon board (aka BLE Carbon) running Zephyr OS. Carbon 96Boards IoT Edition board specifications: MCU – STMicro STM32F401 ARM Cortex M4 microcontroller @ up to 84 MHz with 512kB Flash, 96kB ram Connectivity – Bluetooth 4.0 LE via Nordic Semi nRF51822 SoC + chip […]

August 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Dot is a Location Aware Bluetooth Beacon Used as a Digital Post-it, for Home Automation, and More (Crowdfunding)

Dot physical push notification is another Bluetooth beacon, but the company – Iota Labs – has designed and promote it in a location aware device that gets triggered when you move in a specific area with your smartphone. For example, somebody can leave a dot with a message such as “remember to take the trash out” in the kitchen, and once you walk pass you’ll receive a notification, or you can use a dot to automatically turn on the light if you enter a room at night. The full technical specifications have not been made available but here’s what we know: MCU – Nordic Semi nRF51822 (or similar) ARM SoC with Bluetooth radio Connectivity – Bluetooth 4.0 LE with a range up to around 45 meters Misc – RGB LED Battery – Replaceable battery good for 6 months to one year Android and iOS apps will allow your to configure […]

August 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

TW68 Smart Bracelet Measures Blood Pressure and Heart Rate for $22 and Up

Some people may need to frequently measure their blood pressure because of their health condition, but it’s often a cumbersome experience, so they may get lazy, and not do it as often as needed. TW68 smart bracelet should make this easy, as it’s your typical fitness tracker with an heart rate monitor, but adding the capability to also measure blood pressure. It’s also very cheap, and I first found it on DealExtreme where it sells for just $24. TW68 specifications: MCU – Nordic Semi NRF51822 ARM Cortex M0 micro-controller with 2.4 GHz radio Data Storage – 7 days detailed data, 23 days total data Connectivity – Bluetooth 4.0 LE Display – 0.49″ OLED display Sensors – PixArt-PAH8001EI blood pressure sensor; 6-axis Invensense-MPU6500 accelerometer and gyroscope Function Health tracker: Blood pressure measurement, Heart rate monitor, Pedometer, Sleep tracker Other functions: Call/Message notification, Fall reminder, Social sharing, Time, Alarm clock Misc – […]

July 27, 2016July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

RuuviTag Open Source Bluetooth & NFC Sensor Beacon is Based on Nordic Semi nRF52832 SoC (Crowdfunding)

I’ve recently featured Puck.js Bluetooth 4.2/5.0 Beacon on CNX Software, but there’s another similar option with RuuviTag, also powered by the latest Nordic Semi nRF52832 ARM Cortex-M4 SoC, and RuviiTag+ version that includes multiple sensors: 3-axis accelerometer, and temperature, humidity, and pressure sensor. RuuviTag & RuuviTag+ specifications: SoC – Nordic Semi nRF52832 ARM Cortex-M4F micro-controller @ 64 MHz with Bluetooth Smart and NFC Connectivity Bluetooth 4.2 Smart, Bluetooth 5.0 Ready; over 500 meters line of sight range (with -4dBm power); up to 1.4 km with +4 dBm Integrated NFC antenna Expansion – 8x through holes with 6x GPIOs, and 2x power signals Sensors On-chip temperature sensor RuuviTag+ – Bosch BME280 environmental sensor (pressure, humidity, and temperature), STMicro LIS2DH12 3-axis accelerometer Misc – User/reset button, 2x LEDs, 10-pin SWD debug connector Battery – CR2450 / CR2477 battery up to 10 years depending on application Dimensions – N/A Temperature Range – -40°C […]

July 25, 2016July 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

OSHCHIP Breadboard Friendly Bluetooth Smart Board Comes in a Tiny 16-pin DIP Package

OSHCHIP is a tiny development board powered by a Nordic Semi ARM Cortex-M0 Bluetooth LE / ANT SoC that neatly fits on a breadboard, and beside wireless connectivity thanks to its 2.4 GHz radio, also provides up to 14 I/Os to interface with external hardware. OSHCHIP specifications: Nordic Semi nRF51822 ARM Cortex-M0 MCU @ 16 MHz with 256KB Flash Memory, 32KB SRAM Radio – 2.4 GHz Radio with support for 4 protocols: Bluetooth Low Energy (BLE) / Bluetooth Smart, Gazell, ESB (Enhanced Shock Burst), and optionally ANT Antenna – Built-in antenna, range is 10 to 20 feet, depending on environment (metal, desks, chairs, …) Expansion – 14 general purpose I/O pins. All peripherals (except the ADC) can use any I/O pin: UART, 10-bit ADC, Counter/Timers, SPI, I2C Security – AES Encryption, Random Number Generator. Misc – Temperature sensor, RTC, Watchdog Timer Quadrature Decoder, 3 LEDs, Power Supply – 1.8V to 3.6V […]