Processors Category - Page 1032 of 1197 - CNX Software

May 13, 2014May 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Asus MeMo Pad 7 ME176C Android Tablet Powered by an Intel Quad Core Bay Trail SoC to Sell for $170

Until now, most Intel “Bay Trail” based tablets sold were running Windows 8.1, unless you checked on Aliexpress. It now appears Asus will soon sell an Android Kitkat tablet, ASUS MeMO Pad 7 ME176C, powered by Intel Atom Z3745 quad core SoC, and featuring a 7″ IPS display, 1 GB RAM and 8GB flash, for as low as $166. ASUS MeMO Pad 7 ME176C specifications: SoC – Intel Baytrail-T Z3745 quad core processor @ 1.33 GHz (Burst frequency: 1.86GHz) with Intel HD graphics. 2W SDP. System Memory – 1 GB DDR3 Storage – 8 or 16 GB NAND Flash depending on model + microSDXC card slot Display – 7″ IPS display (1280 x 800 pixel) Camera – 5.0MP rear camera + 2.0MP front camera Connectivity – Wi-Fi 802.11 b/g/n, Bluetooth 4.0, and GPS Audio – 1x Head phone/ Mic-in USB – 1x micro USB (OTG?) Battery – 3910mAh, 15 Whr […]

May 12, 2014May 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 57 Comments

How to Extract a Device Tree File from Android Firmware Files

Up to now, all our cheap Android devices were based on older Linux kernel (3.0.x, 3.4.x) that still used board files (arch/arm/board, but we’ve recently seen companies like Amlogic and Rockchip release source code with Linux kernel 3.10.x. One of the key differences between these version are the move from board files to flattened device tree and multi-platform support. If it is fully implemented, a single kernel image should be able to boot multiple hardware platforms, and all low level configuration handled by the device tree file. Since I’ve connected the serial port of Tronsmart Vega S89 for debugging, and it’s a slow news day, I thought I might try to boot the Linux kernel I compiled myself, but one of the challenge was to get the device tree file. I’ll show how to extract it from the firmware. It should also be possible to get it directly from the […]

May 11, 2014May 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Upcoming MeLe and Egreat A-Series 4K Android Media Players to Feature Realtek RTD1195 SoC

AndroidPC.es has reported that Mele is preparing to launch a new set-top boxes based on Realtek RTD1195 STB SoC with a dual core ARM Cortex A7 (or A9) and a Mali GPU (TBC), and Egreat will also launch their A-Series STB based on the same SoC according to a video by charbax which also features older Realtek and Rockchip Android TV Boxes, and an RK3188 based game console (Egreat K3). RTD1195 supports 4K, H.265 video decoding, and products usually come with USB 3.0 and Gigabit Ethernet ports, and in some cases, even a SATA drive bay. Here are the preliminary specifications from the the upcoming (and unnamed) Mele boxes: SoC – Realtek RTD1195 dual core ARM Cortex A7/A9 @ 1.2GHz with Mali-400 GPU (TBC) System Memory – 1GB DDR3 Storage – 4GB flash (8GB optional), internal bays for 2.5″ or 3.5″ SATA drives up to 3TB Connectivity – Gigabit Ethernet, 802.11n WiFi, and Bluetooth […]

May 10, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

VidOn.me Updates XBMC Source Code for their AllWinner A20 and A31 based Android Media Players

Just at the end of last year, VidOn.me released XBMC apks for their AV100 and AV200 media players, respectively powered by AllWinner A20 and AllWinner A31 SoCs. The company already had an XBMC repository on github, but at the time it hadn’t been updated for a year. Things have changed since then, as they’ve committed several changes, some of them related to AllWinner SoCs to their XBMC repository. I haven’t look into details, but it could be VidOn.me is now in compliance with the GPLv2 license which XBMC is licensed under. If the code is complete, another “side effect” could be there’s finally support for AllWinner A20 (and A10) for XBMC Android. Previsouly, some people tried the AV100 APK on other AllWinner A10/A20 devices, but it did not work, most probably because they locked the binary to their devices, something that would be more difficult to do if the code […]

May 9, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Hummingbird A31 Is a $70 Feature-packed Development Board Powered by AllWinner A31

Merrii Technologies introduced the Hummingbird development kit powered by AllWinner A20 last year. Since then they’ve sold 10,000 pieces, and have been working on another development board based on AllWinner A31 with lots of different ports and options, including an optional 7″ capacitive touch screen. “Quad Core” Hummingbird specifications: SoC – AllWinner A31 quad core ARM Cortex-A7 with PowerVR SGX544MP2 GPU compliant with OpenGL ES2.0, OpenCL 1.x, DX 9_3 System Memory – 1GB DDR3 Storage – 8GB Flash + micro SD card slot Video Output – HDMI, VGA, LVDS Video Input – 3.5mm jack for CVBS (or YPbPr?) In (TV IN) Audio I/O – HDMI, 3.5mm jack for stereo audio, 3.5mm jack for Line IN (Same as TV IN). 2x 15w amplifier on-board. Camera – MIPI interface Connectivity – Gigabit Ethernet, 802.11 b/g/n Wi-Fi and Bluetooth (AP6210 module) Cellular Connectivity – SIM card slot + mini PCIe connector for 3G […]

May 9, 2014May 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Snapdragon 600 based IFC6410 Development Board is Available for $75 For a Limited Time

Despite their popularity with tablets and smartphones, I don’t see much developer community around Qualcomm Snapdragon processor, and only a few low cost development boards. One of them is Inforce Computing IF6410 pico-ITX board powered by Qualcomm Snapdragon 600 (APQ8064) quad core processor with 2GB RAM, 4GB eMMC flash, Gb Ethernet, Wi-Fi, Bluetooth, SATA, micro HDMI and LVDS video outputs, etc.., that normally sells for just $149. But the company is having a promotion for $75 with the coupon code “makerfaire” until May 18, or until the 500 units they’ve reserved are sold out. Shipping is not included in the price, and you’ll have to add about $50 for Fedex delivery (It may be cheaper in the US) for a total of about $125, which still probably makes it the cheapest “Cortex A15 class” board that you can get. The board appears to only officially support Android, and if you […]

May 9, 2014May 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Rikomagic MK902 II Android TV Box with Rockchip RK3288 Coming Soon

Rikomagic MK902 is an Android mini PC powered by Rockchip RK3188 quad core processor, and there’s even a Linux version. The company has announced it has been working on an upgrade of the device named MK902 II, and powered by Rockchip RK3288. It will initially sell with Android, but I would not be surprised with a PicUntu version is also sold later, and even an MK 902 II Chromebox could hit the market, since Rockchip released Chromium OS overlay files for RK3288. They’ve also provide MK902 II specifications: SoC – Rockchip 3288 quad core ARM Cortex A17 up to 1.8 GHz with Mali-T764 GPU System Memory – 2G DDR3 Storage – 8 or 16 GB flash + micro SD slot (up to 32GB) Video Output – HDMI, AV Audio Output / Input – HDMI, stereo audio (via AV port), optical S/PDIF, microphone Video Codecs – MPEG-1, MPEG-2, MPEG-4, H.263, H.264, […]

May 8, 2014May 11, 2014 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Imperas Releases ARM Cortex A53 & A57 Open Source Models for OVPsim

Since the end of 2012, it has been possible to use ARM 64-bit Fast models to run code compiled for the new ARMv8 architecture by emulating a 64-bit ARM processor inside an Intel / AMD processor. ARM fast models are not the only “free” option anymore, as Imperas has released OVPsim 20140430 with open source models for ARM Cortex A53 and Cortex A57 cores. OVPsim is a virtual platform that’s available free of charge for personal usage. The simulator itself (OVPsim) is closed source, but processor, peripheral and platform models are released under the Apache License version 2.0. OVP models of the ARM Cortex-A53 and Cortex-A57 are fully instruction accurate models, and you can use them for personal with an additional free license key, but if you want to make use of advanced features such as TrustZone and hardware virtualization you’ll need to purchase a commercial version (Imperas Developer or […]