Processors Category - Page 1177 of 1195 - CNX Software

October 7, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Embedded Linux Conference Europe 2011

Embedded Linux Conference Europe (ELC-E 2011) will take place on October 26 – 28, 2011 at Clarion Congress Hotel in Prague, Czech Republic. The event will be co-located with LinuxCon Europe 2011 and GStreamer Conference. The day before the official opening of the conference, two tutorials will be offered on Tuesday 25th of October:b Outside the Box: An Introduction to Embedded Linux and Hardware Interfacing Using the Snowball Board – 9:00 – 17:00 – Trainer: Chris Simmonds – Cost: 350 USD. Embedded Android Workshop – 9:00 – 17:00 – Trainer: Karim Yaghmour- Cost: 300 USD. ELCE consists of 3 days of presentations, tutorials and sessions. There will be over 50 sessions during those 3 days. I’ll highlight a few sessions that I find particularly interesting. October 26 10:45 – 11:45 – Linaro’s Android Platform by Zach Pfeffer, Linaro Android Platform team leader. Linaro uses components from the Android Open Source […]

October 6, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AMD G-Series QSeven Module Conga-QAF by Congatec

Congatec announced the Conga-QAF, a Qseven module powered by AMD G-Series embedded processors. The module will come with either the AMD G-T40R single core or the AMD G-T40E dual core processor, with 2 GB DRAM by default (expandable to 4GB), numerous I/O interfaces and an optional on-board SSD with a capacity of up to 32 GB. If you are not familiar with the QSeven Form Factor and why it is used, please read the beginning of the blog post entitled “QSeven Form Factor Embedded Boards by Seco“. To summarize, this is a standard to allow developers to use modules (based on QSeven specs) to test their software on several processors by inserting those modules in a common main board. Here are the specification of the Conga-QAF Qseven module: CPU AMD G-T40E 1.0 GHz Dual Core (L1 cache 64KB, L2 cache 512kB x2, 6.4 W) AMD G-T40R 1.0 GHz Single Core […]

October 6, 2011October 6, 2011 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

60 USD Android Tablet: Aakash UbiSlate 7 Tablet

After much delay, the low cost tablet promised by the Indian government is finally released. The Aakash UbiSlate 7 is designed primarily for Indian students and will be sold to them at a discount. The tablet will be manufactured by Datawind in Hyderabad, India. The retail price will be 2,999 Rupees (~61 USD), but it will be sold to the government for 2250 Rupees (~46 USD) and will end up in the hands of students for a sponsored price of 1300 Rupees (~26 USD). Here are Aakash UbiSlate 7 Tablet Specifications: Processor: 366MHz Conexant Processor Memory: 256MB RAM Storage: 2GB Flash memory + 2GB Micro SD card (expandable to 32GB) OS: Android 2.2 with Getjar Marketplace (not the default Android Marketplace) Display: 7″ resistive touchscreen Network: Wifi only. Later models will be GPRS and SIM enabled. USB: 2 x ports Audio out: 3.5mm jack / Audio in: 3.5mm jack Battery: […]

October 5, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

AMD G-Series based iBase SI-08 Digital Signage

Ibase announced the SI-08, a digital signage player with an AMD G-Series processor and a DVI output. The device features a 1.6GHz dual-core T56N processor, up to 2GB of RAM and 1TB of disk storage, gigabit Ethernet, a serial port, 2 USB port, an audio jack (in or out) as well as a Mini PCI slot for optional Wi-Fi or Bluetooth. Here are the specifications and features of the iBase SI-08 digital signage player: System Mainboard EB900-16-SI CPU Type AMD G-Series Dual-Core APU (Accelerated Processing Unit): T56N=1.65GHz @ 18W TDP CPU Package 413-BGA Chipset AMD A55M Controller Hub Memory DDR3-1333, up to 4GB Graphics ATi Radeon HD6320 series graphics processing system integrated in APU • DirectX 11 • Direct Compute 11 • Open GL 4.0 • OpenCL 1.1 • UVD3 Hardware Video Decoder – MPEG2, MPEG4, H.264, VC-1, WMV9 • Hybrid-DVI connector supporting CRT, DVI, or HDMI devices LAN 1x […]

October 5, 2011October 5, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Intel Unveils Cedar Trail Atom Processors: N2600, N2800, D2500 and D2700

Intel recently published the Intel® Atom™ Processor D2000 Series and N2000 Series Datasheet (PDF). The D2000 and N2000 Series (Codenamed ” Cedar Trail”) includes four new CPUs targeted at Desktops (D2000 Series) and Netbooks (N2000 Series): Atom N2600 @ 1.86 GHz – Up to 2 GB memory – 42 USD Atom N2800 @ 2.13 GHz – Up to 4 GB memory – 47 USD Atom D2500 @ 2.13 GHz- Up to 4 GB memory – 42 USD Atom D2700 @ 2.40 Ghz – Up to 4G memory – 52 USD Those processors will be manufactured using 32nm technology and the D2000 series will replace the existing Atom N475 and N455. The CPUs will also feature an integrated GPU (SGXS45 PowerVR Core) that supports DirectX 10.1 technology and OpenGL 3.0. The processors will support Blu-Ray 2.0 and resolution up to 1080p (1920×1080) and even 2560×1600 for D2000 series via the DP […]

October 4, 2011January 18, 2012 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

Xibo Digital Signage on ARM (Beagleboard / Overo)

Xibo (pronounced eX-E-bO) is an open source, multi-display, multi-zone, fully scheduled digital signage solution written in Python (there is also a dotnet version). This is a client /server solution that can run on Windows or Linux. If you are not familiar with Xibo you can visit http://xibo.org.uk/ or/and read my introduction XIBO: An Open Source Digital Signage Server/Client. Since I had not seen digital signage solution running on low cost ARM development platform such as Beagleboard, Pandaboard or Origen, I decided to give the Xibo python client a try using qemu to emulate Gumstix Overo COM (OMAP 3530). Porting Xibo to ARM could provide several benefits compared to x86 platform: Lower hardware cost Lower power consumption (and electricity bill) Smaller form factor allowing easier integration in displays and in transportation (e.g. buses, subway trains). Easier to implement new digital signage features such as touch screen support, 3G connectivity, location based […]

October 4, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 11.09 Release with Linux Kernel 3.0.4

Linaro has just released version 11.09 based on Linux Kernel 3.0.4. Here are the highlights of the release: Android Ethernet Configuration Manager from the x86 Android project is now available in all builds. Ethernet now works on Panda, Staging Panda, Beagle, Beagle xM, Staging Snowball. QA on all boards for the 11.09 Linaro Android Builds. Daily builds of Android toolchain against gcc-linaro bzr repository is provided. Android is now compiled with GCC4.6 with -O3. Busybox is built from source in all Android builds. glmark2 added to all the official builds for Android. Powertop is now available on Android. Linaro’s 11.09 toolchain has been benchmarked. All Android builds are running with the 11.09 toolchain. The MLO that Panda and Staging Panda uses for Android uses gets built from source from the upstream git. An OMAP4460 Android build is available from android-build. Panda supports Bluetooth. Panda supports Wi-Fi. Snowball Android A-release from […]

October 2, 2011June 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

How to Transfer files between the Host and Qemu via SSH and NFS

Last week, I wrote a blog post explaining how to copy files to a qemu image by mounting the qemu image in the host. This is only useful if emulated platform does not support networking. If networking is enabled, using SSH (Secure Shell) or NFS (Network File System) is more convenient. Using SSH with Qemu To initiate the SSH connection from qemu, there is actually nothing extra to do as long as you have sshd installed and running on the host. If it is not installed simply run sudo apt-get install openssh-shell on the host. This will install and automatically sshd. To initiate the SSH connection from the host, you’ll have to redirect the ssh port to an unknown port and start qemu as follow (for overo):

sudo qemu-system-arm -M overo -m 256 -drive file=./overo_sd_alip.img,if=sd,cache=writeback -clock unix -serial stdio -device usb-kbd -device usb-mouse -redir tcp:2222::22

1	sudo qemu-system-arm -M overo -m 256 -drive file=./overo_sd_alip.img,if=sd,cache=writeback -clock unix -serial stdio -device usb-kbd -device usb-mouse -redir tcp:2222::22

Please refer to Beagleboard Emulator in Ubuntu with Qemu for the detailed instructions on how to setup qemu to emulate beagleboard or […]