Processors Category - Page 609 of 1073 - CNX Software

July 16, 2017July 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

ROCK64 Board Review – Part 1: eMMC Flash Module, Android 7.1 Firmware, Benchmarks, and Kodi

ROCK64 is the second ARM Linux development board by Pine64 that is based on Rockchip RK3328 processor, instead of Allwinner 64 for Pine A64 board, and while both processors comes with four Cortex A53 cores, the Rockchip processor offers a faster GPU, 4K @ 60 Hz video support, as well as USB 3.0 support. I’ve got a sample with an eMMC flash module, and I’m going to test it first with Android 7.1, since those were the only firmware images currently available on the Wiki, but Linux will be available before the board ships publicly at the end of July. Rock64 Linux Ports Status There are now at least three Linux ports in progress: ayufan’s Debian Jessie and Ubuntu Xenial images which are now in pre-release, but should officially be released next week. Arch Linux ARM with no pre-built Rock64 images yet Fedora 25 minimal Image The Yocto Project support […]

July 14, 2017July 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

EduMIP Self-Balancing Robot Kit Based on BeagleBone Blue is Now Available for $50

BeagleBone Blue is a board designed for robotics projects, and one of those projects is EduMIP self-balancing robot that was first designed around BeagleBone Black and a robotics cape, but so far was not available for sale. Renaissance Robotics is now selling the kit, without board, for $50. The kit has been designed by UC San Diego Coordinated Robotics Lab in order to teach robotics to students, and it works with BeagleBone Blue, or BeagleBone Black with the Robotics Cape and an optional WiFi dongle. Some of the subjects that can be learned with eduMIP include: Dynamic modeling and feedback control (classical, state-space, adaptive, …) of unstable systems. Robot motion planning and collision avoidance. DC motor control via (built-in) H-bridges and encoder counters. Attitude estimation via (built-in) IMU and barometer. Communication via (built-in) WiFi (802.11b/g/n) and Bluetooth (4.1/BLE). Charging, balancing, protection, and monitoring of 2-cell LiPo (included). Multithreaded event-driven C programming […]

July 14, 2017July 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Bqeel MVR9 TV Box Review – Part 1: Specifications, Unboxing and Teardown

All Rockchip RK3328 based 4K TV boxes I’ve seen so far come with Fast Ethernet, not Gigabit Ethernet, with the exclusion of Rock64, which is not a TV box, but a development board. But Nagrace sent me Bqeel MVR9 box that comes with Gigabit Ethernet, in order to write a review. I’ll start by having a look at the hardware first, before experimenting with the firmware in several weeks. Bqeel MVR9 Specifications SoC – Rockchip RK3328 quad core Cortex A53 processor with ARM Mali-450MP2 GPU System Memory – 2 GB DDR4 @ 1066 MHz Storage – 16 GB eMMC flash + micro SD card slot Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite video) Video Codec – 4K VP9, H.265 and H.264, 1080p VC-1, MPEG-1/2/4, VP6/8 Audio Output – Via HDMI, and AV (stereo audio) ports; optical S/PDIF […]

July 14, 2017July 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

EtaCore ARM Cortex M3 Core Operates at Low Voltage (0.25V and up) for Higher Power Efficiency

We’ve previously seen Ambiq Micro offering Apollo ARM Cortex M4F MCU with Cortex M0+ energy efficiency, and later the upgraded Apollo 2 MCU with even lower power consumption and better performance. The company can achieve such efficiency thanks to low sub-thresold operating voltage in the 0 to 0.5V range. Another startup – Eta Compute – is now offering another low voltage solution with their EtaCore ARM Cortex M3 IP, and other IP blocks operating at low voltage (0.25 to 1.2V). Eta Compute claims a “10x improvement in power efficiency over any alternative”, and battery life of over 10 years on a CR2032 coin cell. Their website does not provide that many details about the core and development tools, but still mentions the following: The only commercially available self-timed technology supporting dynamic voltage scaling (DVS) that is insensitive to process variations, inaccurate device models, and path delay variations Includes M0+ and […]

July 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

H96 Pro Octa Core TV Dongle Runs Android 7.1.1 on Amlogic S912 Processor

That one will be confusing as H96 Pro is already a TV box, but somebody must have thought that model number was so good, it had to be re-used in another products. So I present to your H96 Pro TV dongle powered by the same Amlogic S912 processor running Android 7.1.1 Nougat. It’s not the first octa-core HDMI TV stick, as we’ve seen MeegoPad A02 (Allwinner A83T) and NEXBOX 809VI (Rockchip RK3368) in the past, but AFAICR I have not come across Amlogic S912 sticks before. H96 Pro HDMI TV stick specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 GPU System Memory – 2GB DDR3 Storage – 8 GB eMMC flash, micro SD slot up to 32GB Video & Audio Output – HDMI 2.0a male connector with HDR support Video Codec – 4K H.265 and VP9 @ 60 fps, 4K […]

July 13, 2017July 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

$13 Orange Pi Zero Set 6 Kit Could Make an Inexpensive DIY Google Home Alternative

Since Google released the Google Assistant SDK for Raspberry Pi 3, and other ARMv7 boards, I thought I should it try myself on one of the tiny headless boards I have, as you just need audio output and a microphone. I first planed to use NanoPi NEO board with NanoHAT PCM5102A audio board, a cheap USB microphone, and pair of speakers, but this morning, I’ve come across Orange Pi Zero Set 6 kit that looks perfect for this applications and sells for just $12.95 plus shipping ($18.27 in total for me) with Orange Pi Zero board, Orange Pi Zero interface board, and a case. Orange Pi Zero board is powered by Allwinner H2+ quad core Cortex A7 processor with 512MB RAM, and can run the required Ubuntu/Debian distribution using one of the Armbian images, and connected to the Internet over Ethernet or WiFi, however if you want to use the […]

July 13, 2017July 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Beelink AP34 Ultimate Apollo Lake mini PC Comes with 8GB RAM

Most Apollo Lake mini PCs on the market ship with 4GB RAM, but if you find this limiting, Beelink AP34 Ultimate, powered by an Intel Celeron N3450 quad core processor, comes with 8GB DDR3 memory and 64GB eMMC flash. Beelink AP34 Ultimate fanless mini PC specifications: SoC – Intel Celeron N3450 quad core Apollo Lake processor @ 1.10 GHz / 2.20 GHz (Burst frequency) with 12 EU Intel HD graphics 500 @ 200/700 MHz (6W TDP) System Memory – 8 GB DDR3 Storage – 64 GB eMMC flash, SD card slot, M.2 SSD slot up to 320 GB Video Output – HDMI 1.4 up to 4K @ 30 Hz Audio – 3.5mm headphone jack and HDMI Connectivity – Gigabit Ethernet, dual band 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 USB – 3x USB 3.0 host ports Misc – Power button and LED, reset pinhole Power Supply – 12V/2A Dimensions – 11.90 […]

July 12, 2017July 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Review of MeLE PCG03 Apo Fanless 4K Mini PC – Part 2: Windows 10, Benchmarks, and Kodi

MeLE PCG03 Apo is an update to MeLE PCG03 mini PC, and one of the rare Apollo Lake mini PCs to be both fanless, and support HDMI 2.0 output. I’ve already checked out the hardware design in “MeLE PCG03 Apo Fanless Apollo Lake mini PC Review – Part 1: Unboxing and Teardown“, so in the second part of the review I tested Windows 10, focusing on HDMI 2.0 features, audio pass-through in Kodi, and performance and stability tests to see how well it compared to similar actively cooled mini PCs such as Voyo V1 VMac mini. MeLE PCG03 Apo Setup and System Information I connected a USB 3.0 drive to one of the USB 3.0 ports, USB keyboard and mouse, and RF dongle for a wireless gamepad to the other USB 2.0/3.0 ports, as well as USB type C to micro USB adapter itself connected to a micro USB OTG […]