Processors Category - Page 640 of 1195 - CNX Software

July 2, 2018July 2, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Microchip Unveils SAM L10 & SAM L11 Arm Cortex-M23 MCU Families with Arm TrustZone for Armv8-M

Microchip has recently announced new SAM L10 and SAM L11 Arm Cortex-M23 MCU families, with the SAM L11 family featuring Arm TrustZone for Armv8-M that provides hardware isolation between certified libraries, IP and application code. SAM L10 & SAM L11 MCU Families Key features: Arm Cortex M23 Core @ 32 MHz Up to 64 KB Flash and 16 KB SRAM picoPower Technology less than 25 μA/MHz in active mode less than 100 nA in sleep mode Fast wakeup time: 1.5 μS Flexible power saving features Enhanced Peripheral Touch Controller (PTC) with improved water tolerance, noise immunity and responsiveness Security (for SAM L11 only) Chip-level tamper resistance Arm TrustZone technology Secure boot Secure bootloader Crypto accelerators Secure key storage Op amp ADC and DAC Package – VQFN32, TQFP32, WLCSP32, VQFN24, SSOP24 Microchip SAM L10 MCU achieved a ULPMark score of 405, or over 200 percent better performance compared to the nearest […]

July 1, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

SECO Q7-C25 / Q7-C26 QSeven SoMs Feature NXP i.MX 8M / i.MX 8Quad Processor

We’ve previously covered SECO’s SM-C12 SMARC 2.0 i.MX 8M system-on-module, but the company has just unveiled two new module families which are compliant with Qseven – another SoM standard – and powered by NXP i.MX 8M dual/quad core Cortex A53 processor and NXP i.MX 8Quad Cortex A53 or A72/A53 SoC with respectively Q7-C25 and Q7-C26 systems-on-module. SECO Qseven i.MX 8/8M System-on-Module Q7-C25 / Q7-C26 specifications: SoC Q7-C25 (one or the other) NXP i.MX 8M Quad 4x Cortex-A53 cores up to 1.5GHz, 1x Cortex-M4 F real-time core, Vivante GC7000Lite GPU, VPU NXP i.MX 8M Dual 2x Cortex-A53 cores up to 1.5GHz, 1x Cortex-M4 F real-time core, Vivante GC7000Lite GPU, VPU NXP i.MX 8M QuadLite 4x Cortex-A53 cores up to 1.5GHz, , 1x Cortex-M4 F real-time core, Vivante GC7000Lite GPU no VPU Q7-C26 (one or the other) NXP i.MX 8QuadMax 2x Cortex-A72 cores + 4x Cortex-A53 cores + 2x Cortex-M4F cores, 2x Vivante […]

June 29, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Raspberry Pi Zero (W) Shield for Arduino is an Arduino UNO Baseboard for RPI Zero Board

There are already various Arduino compatible shields for Raspberry Pi where the add-on board connect to a Raspberry Pi 3 board to provide Arduino headers, but Raspberry Pi Zero (W) Shield for Arduino is a little different as it acts as a baseboard with Arduino header for Raspberry Pi Zero (W) RPI Zero (W) shield specifications: Reset switch for the micro-controller LED – Shield power LED, LED connected to Arduino pin 13, LED connected to Raspberry Pi GPIO pin 13 Expansion Female headers allowing for full-access to all Arduino pins. ICSP header access for AVR Micro-controllers Misc 3mm mounting holes for securely mounting Raspberry Pi Zero (W) to shield (mounting hardware included) Solder-jumpers to disconnect Micro-controller SDA/SCL pins from pull-up resistors Solder-jumper to disconnect Raspberry Pi GPIO13 from LED Power Supply – 6.5 to 12V power supply (6.5 to 9V recommended) via 2.1mm power barrel jack, or 5V via micro […]

June 28, 2018April 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Visual Studio 2017 with an Embedded Linux Arm Device

This is a non-sponsored guest post written by Marc Goodner: Principal Program Manager, Microsoft, and Jeremias Cordoba: Innovation Engineer, Toradex. Today many embedded devices run some flavor of Linux as their primary operating system. This poses a challenge to developers who run Windows on their development machine. This article explains a new way to use the latest Visual Studio for C++ development on an embedded Arm Devices from a Windows Host PC using containers for the build environment. The device we are deploying to is from the Toradex Colibri Family of System on Modules using the NXP i.MX 6ULL SoC, which features an Arm Cortex A-7. As a demo project, we will connect a Bluetooth Sensor with the Toradex Colibri Module. Please note that Visual Studio support for this case is in an early state, you will see improvements from Microsoft and Toradex in the coming months. Prerequisites Colibri i.MX 6ULL […]

June 28, 2018July 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Air-T Artificial Intelligence Radio Transceiver SDR Platform Combines NVIDIA Jetson TX2 and Xilinx Artix-7 FPGA (Crowdfunding)

If often write about low end and cheaper hardware on this blog, but not in this post. Deepwave Digital Air-T (Artificial Intelligence Radio – Transceiver) is a high-end software defined radio platform with continuous frequency coverage from 300 MHz to 6 GHz. The board combines AD9371 RFIC transceiver providing up to 2 x 2 MIMO of 100 MHz of receiving bandwidth, a Xilinx Artix-7 FPGA, and NVIDIA Jetson TX2 module. Air-T hardware specifications & key features: Software-defined Radio Analog Devices 9371 2×2 MIMO transceiver 2 x RX channels (100 MHz each) 2 x TX channels (100 MHz each) Auxiliary RX channels: Observation & Sniffer. Note: Can use either Observation or Sniffer at one time; utilizes one of the RX channels NVIDIA Jetson TX2 for processing 256 NVIDIA CUDA core GPU 6 CPU cores – 2x NVIDIA Denver2, 4x Arm Cortex-A57 8GB RAM 32GB eMMC flash Xilinx Artix-7 FPGA with75k logic […]

June 28, 2018June 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MintBox Mini 2 Apollo Lake Linux Mini PC Launched for $300 and Up

Mintbox Mini 2 / Mini 2 Pro (MB2M) Linux mini PC based on Intel Celeron J3455 Apollo Lake processor and running Linux mint 19 was first announced in March of this year. Compulab has now announced availability of both models, as well as some extra add-on boards: PoE Ethernet device FACET card, 2.5″ HDD FACET card, and GPIO + serial + CANbus FACET Card. The main specifications have not changed with the main differences between the two models between the memory and storage capacities: SoC – Intel Celeron J3455 quad core processor @ 1.5 / 2.2 GHz with 12 EU HD graphics; 10W TDP System Memory & Storage MB2M – 4GB DDR3L-1866 (upgradeable to 16GB via 1x 204-SO-DIMM slot) + 64GB M.2 SSD + micro SD slot MB2M Pro – 8GB DDR3L-1866 (upgradeable to 16GB via 1x 204-SO-DIMM slot) + 120GB M.2 SSD + micro SD slot Display – mini DP […]

June 27, 2018July 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Beelink X45 Basic/Premium NUC Clone Launched for $220 and Up

Last week, we started to read about Beelink X series mini PCs powered by Gemini Lake processors, and with a design similar to Intel NUC mini PCs. Three models will be available at first with Beelink X45 Basic/Premium based on Intel Celeron J4105 processor with respectively 4GB/64GB and 6GB/128GB RAM/storage configurations, and Beelink X55 with a more powerful Intel Pentium Silver J5005 processor, 8GB RAM, and a 128GB SSD. The Beelink X45 models have now showed up on GearBest with pricing starting at $219.99 shipped, but you can bring that down to just under $200 with GBmidyear2018 coupon. Beelink X45 Premium model sells for $259.99 before applying any coupon. [Update: Banggood lists Beelink X45 for $172.99 shipped] Beelink X45 Standard/Premium specifications: SoC – Intel Celeron J4105 quad core Gemini Lake processor clocked @ 1.50 GHz / 2.50 GHz (Turbo) with Intel UHD Graphics 600; 10W TDP System Memory / Storage […]

June 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Canonical Releases Ubuntu 16.04 LTS Certified for Intel NUC

In the x86 world, the theory is that you can take a single Linux distro image should work on any x86 compatible hardware. But for Atom-class processors however, including Bay Trail, Cherry Trail, Apollo Lake and Gemini Lake it has not always been the case, especially with features like audio output, Bluetooth, touchpad, and others. That’s why for example, Linuxium (Ian Morrison) decided to write isorepin.sh script in order to respin Ubuntu ISO images for such platforms and fix various issues. However, it appears Canonical and Intel have decided to take matters into their own hand, and have now released Ubuntu 16.04 LTS certified for Intel NUC mini PCs, kits, and boards for IoT deployment. Canonical made available both Ubuntu Desktop and Ubuntu Core images. Most supported devices are based on Intel 7th generation Intel Core processors: NUC7i5DNKPC Mini PC with Intel Core i5-7300U NUC7i3DNKTC Mini PC with Intel Core […]