Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Linux 5.7 Released – Main Changes, Arm, MIPS and RISC-V Architectures

Linux 5.7 Released – Main Changes, Arm, MIPS and RISC-V Architectures

OK… I’m a bit late on that one. Linus Torvalds released Linux 5.7 last week: So we had a fairly calm last week, with nothing really screaming “let’s delay one more rc”. Knock wood – let’s hope we don’t have anything silly lurking this time, like the last-minute wifi regression we had in 5.6.. But embarrassing regressions last time notwithstanding, it all looks fine. And most of the discussion I’ve seen the last week or two has been about upcoming features, so the merge window is now open  and I’ll start processing pull requests tomorrow as usual. But in the meantime, please give this a whirl. We’ve got a lot of changes in 5.7 as usual (all the stats look normal – but “normal” for us obviously pretty big and means “almost 14 thousand non-merge commits all over, from close to two thousand developers”), So the appended shortlog is only the small stuff that came in this last week since …

Continue reading… “Linux 5.7 Released – Main Changes, Arm, MIPS and RISC-V Architectures”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on Snowball Board Phased Out, and Offered at a Discount

Snowball Board Phased Out, and Offered at a Discount

Snowball is a mobile development board based on ST Ericsson Nova A9500 dual core ARM Cortex A9 SoC , which was officially supported by Linaro (they still released Android and Ubuntu images), and designed by Calao Systems, but since ST-Ericsson venture fell apart, support for the board has been discontinued, and the developer’s community (igloocommunity) has recently been closed down. The last message of the mailing list (now not accessible) reads as follows: A small team of passionate ST-Ericsson people have dreamed about Snowball and they makes it possible. Since December 2011 after a management change, it has been difficult to maintain the program, but with your support, we succeed until this time. Nevertheless, you have been able to demonstrate the pertinence of this program, and its great potential with impressive realizations. In December 2012, STMicroelectronics announced a new strategic plan, where STM takes the decision to exit ST-Ericsson. Then both companies Ericsson and STM agreed to split-up the joint …

Continue reading… “Snowball Board Phased Out, and Offered at a Discount”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linaro 13.05 Release With Linux Kernel 3.10, Android 4.2.2, and Ubuntu Raring Ringtail

Linaro 13.05 Release With Linux Kernel 3.10, Android 4.2.2, and Ubuntu Raring Ringtail

Linaro 13.05 has just been released with Linux Kernel 3.10-rc2 and Android 4.2.2. This is the first release with Ubuntu 13.04 (Raring Ringtail) images. There’s also Linux Linaro Stable (LSK) preview based on kernel 3.9.4. BeagleBone Black support has been added and preliminary hwpack and images are available, an Android Arndale image with virtual framebuffer is also available. You can now get a desktop environment (XFCE) on Aarch64 / ARMv8. Hardware packs with Real-time Linux kernel (PREEMPT_RT) can be downloaded for Pandaboard and Arndale. More work has gone into Aarch64, big.LITTLE HMP, and ARM virtualization (KVM). Finally an UEFI is available not only for Vexpress boards, but also Samsung Origen and Arndale boards, as well as Texas Instruments Pandabord and Beagleboard. Here are the highlights of this release: LAVA First prototype production run of LAVA Lmp completed, tested functional. Beaglebone Black is now running in LAVA. TC2s is now running fully with latest firmware and master image, booting on A7 …

Continue reading… “Linaro 13.05 Release With Linux Kernel 3.10, Android 4.2.2, and Ubuntu Raring Ringtail”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linaro 13.04 Release With Linux Kernel 3.9 and Android 4.2.2

Linaro 13.04 Release With Linux Kernel 3.9 and Android 4.2.2

Linaro 13.04 has just been released. It features Linux Kernel 3.9-rc7 and Android 4.2.2. A lot of work has been done on ARMv8 (Cortex A53) with further work on OpenEmbedded, more testing, and updates to the GCC toolchain. Calxeda EnergyCore server has been added to LAVA, Origen Quad now gets hardware video acceleration in Android Jelly Bean. Still more cleanup has been done on the kernel side with regards to Samsung and ST SoC, and a big.LITTLE porting guide is now available (linaro login required). Here are the highlights of this release: LAVA Prototype of a new publishing system is used to overcome performance problems with android-build.linaro.org. Calxeda EnergyCore support is merged in LAVA, and an isolated system has been set up for web benchmarking. Fedora support is merged in LAVA. A user can submit LAVA jobs using a Fedora pre-built image. Boot commands are untangled from LAVA dispatcher. They’re now read from images. Nexus implementation in LAVA is generalized and …

Continue reading… “Linaro 13.04 Release With Linux Kernel 3.9 and Android 4.2.2”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linaro 13.03 Release with Linux Kernel 3.9 and Android 4.2.2

Linaro 13.03 Release with Linux Kernel 3.9 and Android 4.2.2

Linaro 13.03 is now available, and features Linux Kernel 3.9-rc3 and Android 4.2.2. This month, Linaro has released their first Origen Quad Android image, as well as Tiny Android build for Arndale. The ALIP image listed in the download page is still based on Ubuntu 12.11, but as doc Bormental noticed earlier this month, the latest ALIP Quantal 13.03 image is available for download at https://releases.linaro.org/latest/ubuntu/quantal-images/alip. Some development tools (gcc, g++, vi, make..) are now included in Android, so you can develop and build natively from your Android device. Linaro has kept on cleaning the Linux kernel ARM tree for Exynos and ST Ericson SoCs. More work has been done on big.LITTLE for both IKS and HMP, as well as ARMv8 OpenEmbedded, and an initial GRUB port on ARM UEFI is now available. Here are the highlights of this release: Automation and Validation A simple CLI tool for communicating with the CI dashboard has been developed LAVA supports Arndale booting …

Continue reading… “Linaro 13.03 Release with Linux Kernel 3.9 and Android 4.2.2”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linaro 13.02 Release with Linux Kernel 3.8 and Android 4.2.2

Linaro 13.02 Release with Linux Kernel 3.8 and Android 4.2.2

Linaro 13.02 is now available, and features Linux Kernel 3.8 and Android 4.2.2. The biggest news this month is probably the first release of a preliminary ARM64 Debian/Ubuntu Raring image. Other noticeable items include work on ARMv7 KVM, more improvements to OpenEmbedded ARMv8 implementation, as well as big.LITTLE MP implementation, and some modifications to the toolchain for Cortex A7 support. Origen images are not available for download this month, and there’s still no ALIP images since they have disappeared since Linaro upgraded to Ubuntu Quantal. Here are the highlights of this release: Android AOSP master build for Galaxy Nexus has been setup All the platforms have been updated to 4.2.2 Support for lava-test-shell has been added to linaro-android-build-tools. Developer Platform CI bring up: ARMv7 KVM – Add Arndale hypervisor patch to u-boot-linaro. CI bring up: Arndale – Add Arndale image reports to LAVA, Enable and verify UEFI support in the hwpack. Linux Linaro 3.8 2013.02 released OpenEmbedded based SDK is …

Continue reading… “Linaro 13.02 Release with Linux Kernel 3.8 and Android 4.2.2”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on ST Ericsson NovaThor L8580 Dual Core Processor To Match big.LITTLE Quad Core Processors Performance and Power Consumption

ST Ericsson NovaThor L8580 Dual Core Processor To Match big.LITTLE Quad Core Processors Performance and Power Consumption

ST Ericsson already showcased NovaThor L8580 Cortex A9 processor @ 2.8 GHz at CES 2013. The processor features a technology called eQuad, and as I previously noticed there’s no mention of the number of cores at all on the website and many websites reported the processor featured 4 cores. The processor actually features 2 Cortex A9 core, but thanks to FD-SOI technology they are able to do the equivalent of a Quad Core big.LITTLE processor (i.e. 2x Cortex A15 + 2x Cortex A7) electrically. Since this is just done electrically, you can use the same software as before and will consume much less power, whereas big.LITTLE requires a lot of kernel work. A Cortex A9 will obviously be less powerful than a Cortex A15, but since they are able to boost the frequency up to 3GHz (probably limited to 2.5Ghz in actual product) this can compensate the lower performance, and the die size will be much smaller than on a …

Continue reading… “ST Ericsson NovaThor L8580 Dual Core Processor To Match big.LITTLE Quad Core Processors Performance and Power Consumption”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Linaro 13.01 Release with Linux Kernel 3.8 and Android 4.2.1

Linaro 13.01 Release with Linux Kernel 3.8 and Android 4.2.1

Linaro has just announced release 13.01 which includes Linux Kernel 3.8-rc4 and Android 4.2.1. A lot of work seems to have gone in Arndale board and OpenEmbedded ARMv8. It’s the first time an Ubuntu image is released for Arndale Cortex A15 development board. One the kernel side some Android upstreaming work has been done, as well as some fixes for eMMC, and code for ST Ericsson Novathor 8500 SoC has been reorganized. Version 14 of the big.LITTLE MP (Multi Processing) has been released. The LEG has done further work on Linaro UEFI and GRUB. Here are the highlights of this release: Android Platform Work The first step of the android-build front-end update for new build program has been landed. Origen and Versatile Express manifests have been consolidated into a single manifest. linaro-android-tools were developed to improve development time for kernel developers. See Kernel Update Tools for details. The android-build scripts have been cleaned up and should work from Ubuntu 10.04 …

Continue reading… “Linaro 13.01 Release with Linux Kernel 3.8 and Android 4.2.1”

Support CNX Software – Donate via PayPal, become a Patron on Patreon, or buy review samples