4g lte

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Valtrack V4 is a programmable 4G LTE GPS vehicle tracker with ESP32-C3 Bluetooth & Wi-Fi SoC (Crowdfunding)

Valtrack V4 is a programmable 4G LTE GPS vehicle tracker with ESP32-C3 Bluetooth & Wi-Fi SoC (Crowdfunding)

Valtrack V4

Valetron Systems VALTRACK-V4-VTS-ESP32-C3 (or Valtrack V4 for short) is a 4G LTE GPS vehicle tracker based on ESP32-C3 WiFi and Bluetooth SoC and a SIMCom SIM7672 cellular and GNSS module. Designed to track bicycles, cars, or trucks, the Valtrack V4 GPS tracker is housed in an IP67 waterproof enclosure, takes 12V to 42V DC input from a lead battery or 3.7-4.2V from a backup LiPo or Li-Ion battery, and features an accelerometer to wake up when motion is detected or detect theft, as well as three RGB LEDs for status.   Valtrack V4 specifications: Wireless MCU – Espressif ESP32-C3FH4 CPU – 32-bit RISC-V microcontroller @ up to 160 MHz; Memory – 400 KB SRAM Storage – 4 MB flash Wireless – 2.4 GHz Wi-Fi 4  & Bluetooth 5.0 Cellular and GNSS connectivity SIM7672G 4G LTE Cat 1 module with Global LTE band, 2G fallback, and GNSS support Nano SIM card […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on GL.iNet Flint 3 (GL-BE9300) is an affordable tri-band WiFi 7 router with 5 2.5GbE ports

GL.iNet Flint 3 (GL-BE9300) is an affordable tri-band WiFi 7 router with 5 2.5GbE ports

GL.iNet Flint 3 WiFi 7 BE9300 router

The GL.iNet Flint 3 (codenamed GL-BE9300) is an affordable tri-band WiFi 7 BE9300 router with five 2.5GbE RJ45 ports supporting 10Gbps aggregation, and now available for pre-order for $119 to $159. It follows the lower-end GL.iNet Slate 7 (GL-BE3600) WiFi 7 dual-band travel router introduced a few months ago. The tri-band WiFi 7 router is powered by a 1.5 GHz quad-core Qualcomm processor coupled with 1GB RAM and 8GB eMMC flash for the OS, features a USB 3.0 port for smartphone tethering or cellular dongle, and supports up to 680 Mbps VPN throughput using WireGuard or OpenVPN. Other features include AdGuard Home, failover, load balancing, and more. GL.iNet Flint 3 specifications: CPU – Qualcomm quad-core @1.5 GHz; unamed, but likely Qualcomm IPQ5332 Memory – 1 GB DDR4 Storage – 8 GB eMMC flash Networking WiFi 7 Protocol – IEEE 802.11a/b/g/n/ac/ax/be Wi-Fi Speed – 688Mbps (2.4GHz), 2882Mbps (5GHz), 5765Mbps (6GHz) 4x […]

Posted on by Debashis Das - No Comments on DFRobot Edge101 ESP32 industrial IoT controller offers isolated RS485 and CAN Bus interfaces

DFRobot Edge101 ESP32 industrial IoT controller offers isolated RS485 and CAN Bus interfaces

Edge101 Industrial ESP32 IoT Controller

DFRobot Edge101 is an industrial-grade IoT controller built around the ESP32 MCU, designed as a bridge between development boards and industrial IoT systems. Housed in a full metal enclosure, it comes with various protection features including surge, ESD, lightning, overvoltage, and reverse polarity protection, and supports continuous 24/7 operation in harsh environments. It integrates RS-485, CAN bus, Ethernet, Wi-Fi, Bluetooth, and RTC, and supports expansion via a PCIe slot for 4G LTE cellular communication, making it suitable for automation, environmental monitoring, and remote data acquisition in industrial or outdoor settings. The IoT controller also offers flexible mounting options such as DIN rail or ear mounting. DFRobot Edge101 specifications: Wireless MCU – Espressif Systems ESP32 CPU – Dual-core Tensilica LX6 microcontroller @ up to 240 MHz Memory – 520 KB SRAM, 16 KB RTC SRAM Wireless – WiFi 4 and Bluetooth 4.2 Storage – 4MB SPI NOR flash, MicroSD card slot Connectivity […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on UP Squared TWL / Squared Pro TWL boards are powered by Intel Core 3 Processor N355, N250, or N150 Twin Lake CPU

UP Squared TWL / Squared Pro TWL boards are powered by Intel Core 3 Processor N355, N250, or N150 Twin Lake CPU

UP Squared TWL

AAEON has just introduced upgrades to its Alder Lake-N-powered UP Squared 7100 and UP Squared Pro 7000 SBCs with the UP Squared TWL and UP Squared Pro TWL development boards equipped with Twin Lake CPUs, either Intel Core 3 Processor N355, Intel Processor N250, or Intel Processor N150. Both SBCs can operate in the -20°C to 70°C temperature range, support up to three independent displays, and offer M.2 expansion sockets for storage and wireless, a 40-pin GPIO header, RS232/RS485 interfaces, and three USB ports. However, the UP Squared TWL is a smaller 90×85.6mm SBC with dual gigabit Ethernet, and the UP Squared Pro TWL has a slightly larger design (101.6×101.6mm) with dual 2.5GbE, a SATA port, MIPI CSI camera support, and optional cellular connectivity. UP Squared TWL Specifications: Twin Lake SoC (one or the other) Intel Processor N150 quad-core processor @ up to 3.6 GHz (Turbo) with 6MB cache, 24EU […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Chipsee PPC-CM5-156 Review – Part 2: A Raspberry Pi CM5 fanless Panel PC tested with Raspberry Pi OS

Chipsee PPC-CM5-156 Review – Part 2: A Raspberry Pi CM5 fanless Panel PC tested with Raspberry Pi OS

Chipsee PPC-CM5-156 review

We’ve already had a look at the hardware of Chipsee’s 15.6-inch industrial touch panel PC in the first part of the review, before booting it to Raspberry Pi OS. I’ve now had time to test most features of the PPC-CM5-156 panel PC running Raspberry Pi OS, so I’ll report my experience testing performance and most ports of the Raspberry Pi CM5-based system in the second part of the review.

PPC-CM5-156 panel PC system info and sbc-bench.sh benchmark

Let’s check the features of the PPC-CM5-156 panel PC using the inxi utility:

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Rockchip RK3588 embedded computer features 3x M.2 sockets, 4x RS232, 2x RS485, 2x DI, 2x DO, and more

Rockchip RK3588 embedded computer features 3x M.2 sockets, 4x RS232, 2x RS485, 2x DI, 2x DO, and more

Forlinx FCU3501 RK3588 fanless industrial PC

Forlinx FCU3501 is a fanless embedded computer powered by the Rockchip RK3588 SoC, or the RK3588J industrial-grade variant, and offered with up to 16GB LPDDR4x, 128GB eMMC flash, and plenty of features. Those include HDMI output and input ports, three M.2 sockets for NVMe SSD, Hailo-8 AI accelerator for a combined 26+6 TOPS of AI performance, and 4G/5G cellular module, two gigabit Ethernet ports, a built-in WiFi 4 and Bluetooth 4.2 module, four RS232 and two RS485 isolated serial interfaces, two digital inputs (DI), two digital outputs (DO), and more. Forlinx FCU3501 specifications: SoC – Rockchip RK3588(J) octa-core processor with CPU – 4x Cortex-A76 cores @ up to 2.4GHz (RK3588) / 1.6 GHz (RK3588J), 4x Cortex-A55 core @ 1.8GHz (RK3588) / 1.3 GHz (RK3588J) CPU Arm Mali-G610 MP4 GPU with support for OpenGL ES 1.1, 2.0, 3.2, OpenCL 2.2, Vulkan 1.2 VPU Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on VIA AI Transforma Model 1 – 3.5-inch fanless SBC features MediaTek Genio 700 AIoT SoC for Edge AI applications

VIA AI Transforma Model 1 – 3.5-inch fanless SBC features MediaTek Genio 700 AIoT SoC for Edge AI applications

VIA AI Transforma

VIA AI Transforma Model 1 is an edge AI platform powered by a MediaTek Genio 700 (MT8390) SoC with 4 TOPS of AI performance designed for industrial automation, smart cities, and more. The 3.5-inch fanless SBC is equipped with 8GB RAM and 16GB eMMC flash, and offers three display interfaces (HDMI, DP, MIPI DSI), a 4-lane MIPI CSI camera interface, gigabit Ethernet networking, M.2 sockets for wireless and cellular connectivity, several USB ports,  a 40-pin GPIO header, and more. VIA AI Transforma Model 1 specifications: SoC – MediaTek Genio 700 (MT8390) CPU – Octa-core processor with 2x Cortex-A78 cores @ up to 2.2 GHz, 6x Cortex-A55 cores @ up to 2.0 GHz GPU – Arm Mali-G57 MC3 GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL ES 2.2, and Vulkan 1.0/1.1 APIs VPU Encoding up to 4Kp30 with H.265/HEVC or H.264 Decoding up to 4Kp75, AV1, VP9, HEVC, H.264 codecs supported […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Chipsee 15.6-inch industrial Panel PC review – Part 1: Unboxing, teardown, and first boot to Raspberry Pi OS

Chipsee 15.6-inch industrial Panel PC review – Part 1: Unboxing, teardown, and first boot to Raspberry Pi OS

Chipsee PPC-CM5-156 review: Raspberry Pi CM5 industrial panel PC

I’ve just received a review sample of Chipsee PPC-CM5-156 15.6-inch industrial panel PC that was recently added to the Raspberry Pi CM5-based Chipsee panel PCs family we covered in February with 7-inch and 10-inch models. I’ll do a two-part review starting by listing the specifications, doing an unboxing and a teardown, and booting the system in the first part, before doing further testing with Raspberry Pi OS and most interfaces and features in the second part. Chipsee PPC-CM5-156 specifications SoM – Raspberry Pi CM5 or CM5 Lite with Broadcom BCM2712 quad-core Cortex-A76 SoC, 2GB, 4GB, or 8GB RAM, optional 16GB, 32GB, or 64GB eMMC flash Storage MicroSD card slot M.2 M-Key 2230/2242/2260/2280 (PCIe Gen2 x1) socket for NVMe SSD Display – 15.6-inch IPS display with 1920×1080 resolution, 10-point capacitive touchscreen with 1mm armored glass, 400 cd/m2 brightness Video Output – HDMI 2.0 port up to 4Kp60 Audio 3.5mm audio out […]

Exit mobile version
Firefly NVIDIA Jetson products