4k News - Page 50 of 78 - CNX Software

December 20, 2016May 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Vorke Z3 Rockchip RK3399 TV Box to Launch in February 2017

I was expecting devices based on Rockchip RK3399 hexa-core processor to launch by the end of this year, that is about right now, but finally it looks like products will only start the show by the end of Q1 2017, as Firefly-RK3399 development board is scheduled to ship to backers in March 2017, while GeekBuying has started teasing us with their Vorke Z3 TV box powered by Rockchip RK3399 with 4GB RAM slated to launch in February 2017. [Update: Vorke Z3 is now up for sale for $169.99 including shipping] Vorke Z3 preliminary specifications: SoC – Rockchip RK3399 hexa-core processor with 2x ARM Cortex A72 cores at up to 2.0GHz, 4x Cortex A53 cores, and an ARM Mali-T860MP4 GPU System Memory – 4GB LPDDR3 Storage – 32GB eMMC flash, external SATA interface (hopefully implemented via the PCIe interface), micro SD slot Video Output – HDMI 2.0 up to 4K @ […]

December 16, 2016January 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Review of Mecool BB2 Pro TV Box with DDR4 Memory – Part 1: Specs, Unboxing and Teardown

Mecool BB2 Pro is yet another Amlogic S912 Android 6.0 TV box, but after Eweat R9 Plus, it’s my second TV box with DDR4 memory that should deliver much higher bandwidth compared to DDR3 memory used in most TV boxes. But so far, it’s clear how much performance can be extracted from the system with higher memory bandwidth in actual use, and that’s exactly what I hope to find out in the second part of the review, but in this post I start by going through the specs, check the box and its accessories, as well as the hardware design. Mecool BB2 Pro specifications Apart from the DDR4 memory, BB2 Pro has pretty common specifications: SoC – Amlogic S912 octo-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 GPU System Memory – 3 GB DDR4 Storage – 16 GB eMMC flash + micro SD slot up […]

December 15, 2016December 17, 2016 by Karl Johnson - 16 Comments

YokaTV KB2 Review – Amlogic S912 TV Box with 32 GB Flash

CNXSoft: This is another review by Karl about Amlogic S912 based YokaTV KB2 TV box. Introduction Today we will be looking at Videostrong YokaTV KB2. Below are the specs from Videostrong website. This is my first S912 device so I had high expectation. I have been using it for quite some time now with no major issues. I received approximately 6 OTA updates since I started testing and some welcome updates have come. Build When I receive a box first thing I do is take it apart and check out the inside. I was excited when I found out it had 32 gig of storage. It is not too common. Then when I opened the box I was really happy to see an antenna that wasn’t soldered on. Makes it easy to add a different one. +1 for KB2. Then I noticed the heat sink. It seemed a little small. […]

December 12, 2016January 7, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Eweat R9 Plus Android TV Box and OpenWrt NAS Review – Part 1: Unboxing and Teardown

Zidoo X9S is getting some competition with Eweat R9 TV boxes based on the same Realtek RTD1295 processor with built-in SATA, Gigabit Ethernet, 4K VP9 and H.265, HDR, and USB 3.0. The company has three R9 models, and they sent me to top of the line R9 Plus with 2GB RAM, 16GB storage, a 3.5″ SATA bay, HDMI input, and dual Gigabit Ethernet ports for evaluation. I’ll start the first part of the review by checking out the hardware inside and out, before testing the firmware in the second part. Eweat R9 Plus Unboxing The device ships in a large package with a handle which can be convenient in brick and mortar shops since the whole package weights about 1.8 kilograms.The package then contains a smaller package will all accessories: a 12V/2.5A power supply, a “Quickly User Guide” (sic.), a HDMI cable, and an IR remote control taking two AAA […]

December 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Rockchip Introduces RK3228H and RK3228B Processors for IPTV/OTT TV Boxes

Rockchip has just tweeted about their RK3xxx processors family, and two new processors appear to have been included in the list with Rockchip RK3228H quad core Cortex A53 processor and RK3228B quad core Cortex A7 processor both supporting 4K video playback and ouput, as well as HDR. Rockchip RK3228H has many of the same features as Amlogic S905X with a quad core Cortex A53 processor, an ARM Mali-T450 GPU, 4K H.265/H.264 video support, and HDR10/HLG, but it also adds something extra with a USB 3.0 interface. RK3328B is lower end with its quad core A7 processor, but still supports H.265/H.264 up to 4K resolution, and include the usual interfaces such as HDMI, CVBS, and a Fast Ethernet PHY. There may be more details on the press release, but the page won’t load for me right now. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting […]

December 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

SDMC DV8219-LTE Android TV Box Comes with a Built-in 4G LTE Modem

Most users connect their TV boxes to the Internet through WiFi or Ethernet, but in some specific use case, such as digital signage in mass transport or in remote locations, it might be useful to get access to cellular networks. We’ve seen a few Android TV boxes with a built-in 3G modem in the past including CS918S and MBX-3G, but the former is based on the rather old Allwinner A31s processor, and the latter did not raise enough found on Indiegogo. But there’s nothing new, as SDMC DV8219-LTE is a more recent TV box powered by Amlogic S905X processor and running Android 6.0, equipped with a 4G LTE modem. SDMC DV8219-LTE TV box specifications: SoC – Amlogic S905X quad core Cortex A53 processor @ up to 1.5 GHz with a Mali-450MP GPU System Memory – 1GB DDR3 SDRAM (2GB as option) Storage – 8GB eMMC flash (4 to 64GB as […]

December 6, 2016December 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

First Intel Apollo Lake J3455/J4205 Processor Benchmarks & Video Tests

Many products powered by Intel Apollo Lake processors have already been announced, but few are actually shipping, and I have yet to get one here. However, AndroidPC.es got hold of ASRock J4205-ITX and J3455-ITX motherboards powered by respectively a Pentium J4205 quad core processor and a Celeron J3455 quad core processor, run a few benchmarks, and tested videos in Windows 10 on the motherboards with Kodi 17 and MPC-HC. Let’s have a look at some of the benchmarks to better understand of what we can expect from Apollo Lake desktop processors. First there’s not that much of a difference between Celeron J3455 (1,771 points) and Pentium 4205 (1,830 points) in PCMark Home Convetional benchmark, however you should clearly feel a boost in performance compared to systems with Intel Cherry Trail x5-Z8300 processor (1,141), and the score is getting fairly close to a mini PC with an Intel Core i3-5005U […]

December 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Full Specifications for Intel Apollo Lake NUC Mini PC’s NUC6CAYB Board Released

Intel unveiled Intel NUC6CAYS & NUC6CAYH NUCs to be powered by Intel Celeron “Apollo Lake” Jxxx processors, but at the time we did not have the full technical specifications. The company has now published a 66-page technical product specification for NUC6CAYB board used in both mini PCs. Intel NUC Board NUC6CAYB specifications: SoC – Intel Celeron J3455 quad core processor @ 1.5 GHz to 2.3 GHz (burst) with 12EU Intel HD graphics 500 @ 250 to 700 MHz supporting DirectX 9.3/10/11.1/12, OpenCL 1.2, OGLES 3.0, OpenGL 4.3 (10W TDP) System Memory – 2x DDR3L-1600/1833 SO-DIMM supporting up to 8GB DDR3L-1866 in total Storage – 32GB eMMC flash (Sandisk, Hynix or Samsung depending on your luck), 2.5″ SATA3 bay for hard drives up to 9.5mm thick, SDXC slot with UHS-I support Video Output – HDMI 2.0 (4K @ 60 Hz) with HDMI CEC via MegaChips MCDP2800-BCT DisplayPort 1.2a to HDMI 2.0 […]