802.11ah

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on HalowLink 2 Wi-Fi HaLow access point and extender offers up to 1 km range, supports up to 1,000 IoT end devices

HalowLink 2 Wi-Fi HaLow access point and extender offers up to 1 km range, supports up to 1,000 IoT end devices

GL.iNet HaLowLink 2 WiFi HaLow access point extender

Designed in collaboration with Morse Micro, GL.iNet’s HalowLink 2 is a Wi-Fi HaLow (802.11ah) access point and extender that offers up to 1 km range and supports up to 1,000 IoT end devices. It’s an update to the earlier HaLowLink 1 Wi-Fi HaLow gateway with the exact same functionality, except it replaces a Morse Micro MM6108-based module with an MM8108-based module that offers a higher max link rate (43.3 Mbps vs 32.5 Mbps), broader region support, higher device capacity, and potentially better /performance range with up to 26 dBm Tx power (vs 23dBm in the first generation model). HalowLink 2 specifications: SoC – Mediatek MT7621 dual-core, quad-thread MIPS1004K processor @ up to 880MHz System Memory – 256MB DDR3 Storage – 32MB NAND Flash Connectivity Wi-Fi HaLow (802.11ah) AzureWave AW-HM677 module with Morse Micro MM8108 HaLow chipset supporting Wi-Fi HaLow, IEEE 802.11ah, Sub-GHz, 43.3 Mbps, ultra-low power, WPA3 Sub-GHz frequency range […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on CamThink NeoEyes NE101 – A low-power, modular ESP32-S3 Vision AI Camera with optional 4G LTE and WiFi HaLow connectivity

CamThink NeoEyes NE101 – A low-power, modular ESP32-S3 Vision AI Camera with optional 4G LTE and WiFi HaLow connectivity

CamThink NeoEyes NE101

CamThink NeoEyes NE101 is a battery-powered, low-power Vision AI Camera powered by an ESP32-S3 wireless module, featuring event-triggered image capture, and suitable for real-time vision control. By default, the camera supports WiFi 4 and Bluetooth 5.0 connectivity, and ships with a 5MP OV5640 camera module with an LED flash. However, the ESP32-S3 camera has a modular design, and it is offered with 4G LTE Cat 1 or WiFi HaLow connectivity, supports replaceable lenses, optional housing, and custom mounting options. CamThink NeoEyes NE101 specifications: Wireless Module – ESP32-S3-WROOM-1 MCU – ESP32-S3 dual-core Tensilica LX7 up to 240 MHz with 512KB SRAM, up to 8MB PSRAM Storage – 16MB flash Wireless – WiFi 4 and Bluetooth LE 5 PCB antenna Optional wireless features NE101-L01GL – LTE Cat 1 with global support NE101-HL00 – WiFi HaLow 868 MHz NE101-HL01 – WiFi HaLow 915 MHz Storage – MicroSD card slot Camera FPC camera connector […]

Posted on by Debashis Das - No Comments on Maduino Zero Wi-Fi HaLow – An 802.11ah board programmable with the Arduino IDE

Maduino Zero Wi-Fi HaLow – An 802.11ah board programmable with the Arduino IDE

Maduino Zero Wi Fi Halow module

Makerfabs Maduino Zero Wi-Fi HaLow is an Arduino Zero-compatible Wi-Fi HaLow (802.11ah) development board designed for low-power, long-range wireless communication in smart agriculture, industrial automation, and remote monitoring applications. The board is built around the Microchip ATSAMD21G18 Cortex-M0+ MCU to manage I/O, system control, and interface with the TXW83xx-based WiFi HaLow module. It operates in the 730–950 MHz sub-GHz band, features a microSD card slot for storage, and two GPIO headers. The board gets power through a USB Type-C port or a 3.7V LiPo battery (chargeable via USB) and includes an external antenna for long-range connectivity. Maduino Zero Wi-Fi HaLow specifications: MCU – Microchip ATSAMD21G18A Arm Cortex-M0+ microcontroller @ 48 MHz with 256KB flash memory, 32KB RAM Storage – MicroSD card socket Wi-Fi HaLow TXW83xx series based on IEEE 802.11ah Frequency Range – 730 MHz to 950 MHz bands Channel bandwidth – 1/2/4/8MHz Data Range – 150 Kbps to 32.5 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on AsiaRF AWH575-MF1 WiFi HaLow industrial IoT controller offers RS232, RS485, I2C, SPI, UART, and ADC interfaces

AsiaRF AWH575-MF1 WiFi HaLow industrial IoT controller offers RS232, RS485, I2C, SPI, UART, and ADC interfaces

WiFi HaLow IoT controller

AsiaRF AWH575-MF1 is a WiFi HaLow industrial IoT controller / remote control kit with RS232, RS485, I2C, SPI, UART, and 12-bit ADC interfaces to connect sensors or actuators and designed for long-range, low-power M2M communication. The board is comprised of an STMicro STM32U5 Cortex-M33 microcontroller to handle I/Os and communicate with an MM6108 WiFi HaLow (802.11ah) module made by AsiaRF. The board takes power from a USB-C port or optionally from a terminal block supporting a wider 9V to 24V DC input. AsiaRF AWH575-MF1 specifications: MCU – STMicro STM32U585CIT6Q CPU – Arm Cortex-M33 core @ 160 MHz Memory – 786 KB SRAM Storage – 2MB Flash Wi-Fi HaLow AsiaRF 802.11ah module based on Morse Micro MM6108 chipset Frequency Range – 902MHz to 928MHz Channel bandwidth – 1/2/4/8MHz Data Rate – Single-stream max data rate of 10 Mbps Transmit Power – 21dBm +/-2dBm @ MCS 0 Modulation – BPSK/QPSK/16 QAM/64 QAM […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Seeed Studio launches Wi-Fi HaLow mini PCIe module for Raspberry Pi, add-on board for XIAO boards

Seeed Studio launches Wi-Fi HaLow mini PCIe module for Raspberry Pi, add-on board for XIAO boards

Wio-WM6108 Wi-Fi HaLow mini PCIe module

Seeed Studio has launched two 900 MHz WiFi HaLow modules for long-range, low-power communication based on Quectel FGH100M-H: the Wio-WM6180 Wi-Fi HaLow mini-PCIe module designed to be installed in hardware such as OpenWrt routers or even Raspberry Pi SBCs, and the Wi-Fi HaLow module for Seeed Studio XIAO designed to take XIAO boards with Espressif, Raspberry Pi, or Nordic Semi microcontrollers. These solutions can be useful for Smart Home devices, industrial automation, Smart City infrastructure, Smart Agriculture, and environmental monitoring systems. The most typical use cases are WiFi HaLow cameras with up to one kilometer range. Wio-WM6180 Wi-Fi HaLow mini-PCIe Module Specifications: Quectel FGH100M-H Wi-Fi HaLow module compliant with IEEE 802.11ah standard. Chipset – Morse Micro MM6108 Wi-Fi Frequency Band – 902–928 MHz Operating mode – Access Point (AP) or Station (STA) Modulation – OFDM, BPSK, QPSK, 16QAM, 64QAM Data Rate – Up to 32.5Mbps link rate Range – Up […]

Posted on by Debashis Das - 16 Comments on HaLowLink 1 Wi-Fi HaLow gateway turns legacy devices into Wi-Fi HaLow clients via Ethernet, USB, or 2.4 GHz Wi-Fi

HaLowLink 1 Wi-Fi HaLow gateway turns legacy devices into Wi-Fi HaLow clients via Ethernet, USB, or 2.4 GHz Wi-Fi

MorseMicro HaLowLink 1 Long Range Sub GHz Wi Fi HaLow

Morse Micro in collaboration with GL.iNet has recently showcased the HaLowLink 1 Wi-Fi HaLow gateway, which the company terms as Wi-Fi HaLow reference design and evaluation platform developed for long-range, low-power wireless connectivity for IoT applications. Built around the AzureWave AW-HM593 module with Morse Micro MM6108 silicon, it supports 1/2/4/8 MHz bandwidths. It features a MediaTek MT7621A dual-core CPU, Wi-Fi 4 module, dual Gigabit Ethernet, USB-C, and an SMA antenna connector, allowing it to work as a Wi-Fi HaLow router, access point, or extender. The device runs OpenWrt and provides an intuitive web-based UI and SSH/CLI configuration. OpenWrt also gives access to a web-based UI and SSH/CLI configuration. These features make this device useful for applications like smart homes, industrial automation, agriculture, and telecommunications. HaLowLink 1 specifications: SoC – Mediatek MT7621 dual-core, quad-thread MIPS1004K processor @ up to 880MHz System Memory – 256MB DDR3 (optional 512 MB) Storage – 32MB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Morse Micro MM8108 WiFi HaLow SoC supports up to 43.33 Mbps transfer rate, improves range and power efficiency

Morse Micro MM8108 WiFi HaLow SoC supports up to 43.33 Mbps transfer rate, improves range and power efficiency

Morse Micro MM8108

Morse Micro MM8108 is a new WiFi HaLow (802.11ah) SoC with a throughput of up to 43.33 Mbps, and improved range and power efficiency compared to its predecessor the Morse Micro MM6108 introduced in 2022 and supporting up to 32.3 Mbps transfer rate. The new chip is also smaller at just 5x5mm in a BGA package instead of 6x6mm in a QFN48 package for the MM6108/MM6104, adds a USB 2.0 host interface besides SDIO 2.0 and SPI, as well as a MIPI RFFE (Radio Frequency Front-End) for integration and interoperability with multi-radio systems. Morse Micro MM8108 specifications: 32-bit RISC-V Host Applications Processor (HAP) Single-Chip IEEE802.11ah Wi-Fi HaLow transceiver for low-power, long-reach IoT applications Worldwide Sub-1 GHz frequency bands (850MHz to 950MHz) On-chip 26 dBm power amplifier with support for external FEM (Front End Module) option 1/2/4/8 MHz channel bandwidth for up to 43.3 Mbps data rate using 256-QAM modulation at […]

Posted on by Debashis Das - No Comments on STM32-powered MM6108-EKH05 Wi-Fi HaLow evaluation kit supports Bluetooth, Camera, and Qwicc/MikroBus modules

STM32-powered MM6108-EKH05 Wi-Fi HaLow evaluation kit supports Bluetooth, Camera, and Qwicc/MikroBus modules

Morse Micro MM6108 EKH05 evaluation kit

Morse Micro has recently launched the MM6108-EKH05 Wi-Fi HaLow Evaluation Kit designed to reduce the development and deployment time of IoT products. Built around the Morse Micro MM6108 HaLow SoC, this kit combines long-range, low-power wireless connectivity with a range of integrated sensors, making it ideal for IoT engineers and developers. Key features include Wi-Fi HaLow connectivity, an STM32U585 Cortex-M33 MCU, integrated sensors (temperature, humidity, accelerometer), 16 MB of SPI Flash memory, programmable GPIOs, power measurement tools, and WPA3 security for reliable and secure communication. The kit also includes alternative power options including USB, battery, or external power, and embeds support for a camera, MikroBus and Qwicc expansion modules, Bluetooth, and current measurement circuitry. All these features make this kit useful for applications including smart homes, industrial automation, and agricultural monitoring. MM6108-EKH05 specifications: MCU – STM32U585 Arm Cortex-M33 microcontroller @ 160 MHz with TrustZone, 2 MB Flash Storage – 16Mbit […]

Exit mobile version