Android News - Page 278 of 364 - CNX Software

November 9, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

MSC Q7-MB-EP4 Is a QSeven Starter Kit Powered by Freescale i.MX6

MSC Embedded, a company specialized in the design and manufacturing of embedded boards, has recently announced MSC Q7-MB-EP4, a complete Starterkit for the company’s Qseven modules based on Freescale i.MX6 Solo, Dual or Quad processors. The starter kit comes with a suitcase comprise of a heatspreader with heatsink, a 12V power supply, a cable kit (SATA data and power cable), a DVD, a getting started guide, and more importantly a 3.5″ Qseven carrier board (Q7-MB-EP4) with socket for Qseven modules Rev. 1.20 with the following specifications: CPU Module Interface – Socket for Qseven Rev. 1.20 compatible modules based on the Freescale i.MX6 Storage – 1x SATA connector + mSATA Socket with support for mSATA and mSATAmini cards, MMC/SD Card, and serial EEPROM for EPI/DP extensions Standard Interfaces: 7x USB 2.0: 4x USB (Series-A Jack), 1x USB internal pin header, USB on mini USB connector, USB at Mini PCI Express socket […]

November 8, 2013November 8, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYIR MYD-SAMA5D3X Development Boards Feature Atmel ARM Cortex-A5 SAMA5D3 Processors

MYIR Tech, a company based in Shenzhen, and ARM Connected Community Member, has recently made available MYD-SAMA5D3X boards powered by Atmel ATSAMA5D3 ARM Cortex-A5 embedded MPU. Like many development boards, thise are composed of a baseboard coupled by a 200-pin SO-DIMM computer-on-module (CoM) featuring one of the four Atmel SAMA5D3 processor: SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35. The boards all feature 512MB DDR2 SDRAM, 256MB Nand Flash, 16MB Nor Flash and 4MB Data Flash on board. Typical applications developed with these boards include control panel/HMI, smart grid, medical and handheld terminals, outdoor GPS, DECT (digital enhanced cordless telecommunications) phones, and more. MYD-SAMA5D3X boards specifications: Processor – Atmel SAMA5D31, SAMA5D32, SAMA5D34 or SAMA5D35 Cortex A5 up to 536MHz with 128KB of SRAM and 160KB of ROM System Memory – 512MB DDR2 SDRAM Storage – 256MB NAND Flash, 4MB Data Flash, 16MB Nor Flash, one MMC/SD card slot, and one microSD card slot Peripheral […]

November 8, 2013November 8, 2013 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

$179 Arndale Octa Developement Board Gets an Upgrade to Exynos 5420 big.LITTLE SoC

Hardkernel ODROID-XU may have been the first low cost big.LITTLE development board, but since it’s using Exynos 5410 SoC, big.LITTLE processing is limited to cluster migration that means using A15 cores or A7 cores. Insignal’s Arndale Octa was also initially announced with Exynos 5410, but the good news is that we’ll soon get a fully functional big.LITTLE development board as Arndale Octa has been upgraded to Exynos 5420 Octa-core SoC. This board will support both In-Kernel Switching (IKS) and Global Task Scheduling (GTS) implementations, and be officially supported by Linaro like the first Arndale board based on Exynos 5250 dual core Cortex A15. Here are the specifications of the board (derived by me from several pages, and pictures): SoC – Samsung Exynos 5420 octa core SoC with 4x Cortex A15 cores up to 1.8 GHz, 4x Cortex A7 cores up to 1.3 GHz in big.LITTLE configuration, and ARM Mali T-628 […]

November 7, 2013 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

VIA Unveils VAB-820 Pico-ITX Board Powered by Freescale i.MX6 Quad

About two weeks ago, VIA announced the VAB-820, which according to the company, is the first ARM based quad core Pico-ITX single board computer (SBC) on the market. A claim that looks to be incorrect by the way. The board is powered by Freescale i.MX6Quad quad core ARM Cortex A9 processor, and comes with 1GB DDR3 SDRAM and 4GB eMMC Flash. This is an industrial board targeting in-vehicle, surveillance and industrial applications, designed to work in an operating temperature range from -20°C ~ 70°, and with a seven years longevity support. VAB-820 Specifications: SoC – Freescale i.MX 6Quad ARM Cortex-A9 @ 1.0GHz with Vivante GC2000 GPU System Memory – 1GB DDR3-1066 SDRAM using 128M x16 memory devices Storage – 4MB SPI Serial Flash, 4GB eMMC Flash, and microSD slot (up to 64GB) Connectivity – Gigabit Ethernet using Micrel KSZ9031RNX Ethernet transceiver with RGMII support Audio – Freescale SGTL5000 low power stereo […]

November 6, 2013November 6, 2013 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Geniatech ATV1800 Android TV Box To Feature AMLogic Quad Core Processor & Android 4.3

A few months ago, we learned AMLogic was working on a Quad core Cortex A9 SoC with the new ARM Mali-450MP6 (8 cores) GPU called AML8726-M8. It turns out AML8726-M8 may not only be one processor, but a family of processors (M801, M802, M803, and M805) according to a recent article in Chinese. This SoC was going to be part of Geniatech ATV1800 Android STB, but specifications were not available. More details have now surfaced. Geniatech (aka Mygica) ATV1800 Enjoy TV Specifications: SoC – AMLogic M801 or M802 Quad core Cortex A9 @ 1.6 to 2.0 GHz + ARM Mali-450MP6 GPU System Memory – 2GB DDR3 Storage – 8GB NAND + microSD card slot Video Output – HDMI 1.4 up to 1080p, and composite Audio Output – HDMI, Stereo RCA output, and optical SPDIF (TBC) Connectivity – 10/100M Ethernet, built-in 802.11 b/g/n WiFi, and Bluetooth USB – 4 USB 2.0 […]

November 6, 2013November 7, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Android 4.4 KitKat on Galaxy Nexus – ROM, Linaro, and Petition

Google has already released the binaries for Android 4.4 “KitKat” for the Nexus 5, and images are coming for Nexus 4, Nexus 7, and Nexus 10, in the next few weeks. Source code is also available in AOSP (Android Open Source Project). However, even though KitKat has been optimized for older devices, the Galaxy Nexus won’t an official Android 4.4 released because it was released at the end of 2011, which is over the 18 months update window guaranteed by Google. Many people are upset about this decision, and several people have started working on KitKat for Galaxy Nexus. The Linaro team found a solution within minutes by going to the convenience store, and providing KitKat on Galaxy Nexus as shown below. However, usability was not really ideal, so they had some more work to do… In the meantime, Grabak, a developer and member of XDA Forums, provided an alpha […]

November 4, 2013November 4, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$91 IPPLI Mars i8 is a Cylinder Shaped STB Based on Rockchip RK3188

Most of set-top boxes come with a casing with a rectangular shape. But some designs are more original: spaceship-like, spherical, or even in the shape of a pyramid. We’ve now got another option with IPPLI Mars i8, a media player based on Rockchip RK3188, that comes with a cylindrical enclosure. Here are the technical specifications of the device: SoC – Rockchip RK3188 quad core Cortex A9 @ 1.6 GHz + Mali-400MP4 System Memory – 2GB DDR3 Storage – 8GB NAND Flash + microSD slot (Up to 32GB) Connectivity: Wi-Fi 802.11 b/g/n with external Wi-Fi antenna. Bluetooth Bluetooth 2.1 + EDR 10/100M Ethernet Video Output – HDMI v1.4 up to 1080p Audio Output – HDMI, optical audio, and 3.5mm jack Camera – 2.0MP with microphone USB – 2 x USB 2.0 port, 1 x Mini USB (OTG) Dimensions – 8.5 cm x 8.5 cm x 13.0 cm Weight – 252 g […]

November 4, 2013November 4, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

One2Touch Softpad C1 and S1 are NFC Keyboards for Android Devices

It’s pretty easy to find Bluetooth keyboards if you want to a keyboard to type more easily and faster on your phone. They have two small inconveniences however: they need to be paired, and need to be recharged. The first one is not really a problem, but the second can be. If your phone supports NFC, you can now get One2Touch Softpad C1 or S2 wireless keyboard using NFC technology. These do not require pairing, nor charging (but uses CR2025 batteries). Softpad S1 is similar to C1, expect there’s space in the middle of the keyboard to insert your phone. S1 has recently been (quickly) reviewed by Android Central. To make the keyboard work with your Android smartphone, you’ll need to download the drivers from Google Play, and you’re ready to go. You can watch the video below for some of the use cases with Softpad C1. I could not […]