Arduino News - Page 104 of 104 - CNX Software

July 21, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

AnDevCon IV Classes and Workshops Schedule

AnDevCon is a technical conference for software developers building Android apps, and the fourth Android developer conference will take place in San Francisco on December 4-7, 2012. The organizers have already listed the schedule, including details about the workshops and classes which will take place at the conference. The 4th of December is reserved for workshops, and the other 3 days can be spent on shorter classes. All workshops will provide sample code, as well as most classes, excluding the overview session and business related sessions. There will be three full day Android workshops: Android Development Boot Camp – Hands-on introduction to Android application development and the tools essential to the process. Beyond an introduction to the basics, this workshop also covers some of the common hurdles met with development, and how to overcome them. You will also have the opportunity to build an Android app of your own where […]

July 14, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

WiFi Tank Based on EEE PC, Arduino, Ubuntu and Node.js

Eight computer and electrical engineers built a WiFi Tank (Node.js robot) as part of a senior design project at Northeastern University, in Boston, Massachusetts. The robot brain is an EEE PC running Ubuntu, together with an Arduino board and is programmed using node.js. Each tank is equipped with a camera and 2 customized Wi-Fi repeaters (which it can drop it extend range), and it’s targeted at military operations or disaster-affected areas where network infrastructure is not available. Here are the key characteristics of this robot Robot controlled over WiFi 102 cm long, 71 cm wide, 41 cm tall, about 68 kg. Custom-built (except for treads) out of aluminum Range: 1 km with one on-board router and two droppable long-range repeater modules Running time: ~12 hours On-board webcam with microphone, night vision, pan and tilt On-board GPS for location tracking Custom-made remote user interface, works on any device with a web […]

May 31, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Willow Garage Launches The Open Source Robotics Foundation (OSRF)

Willow Garage announces the formation of the Open Source Robotics Foundation (OSRF), an independent, non-profit organization founded by members of the global robotics community whose goal is to support the development, distribution, and adoption of open source software for use in robotics research, education, and product development. The OSRF Board of Directors is composed of the following members: Wolfram Burgard. Dr. Burgard, a professor at the University of Freiburg, heading the Laboratory for Autonomous Intelligent Systems. His major research interests lie in mobile robotics, state estimation and control, as well as artificial intelligence. Ryan Gariepy, co-founder and CTO of Clearpath Robotics. Clearpath Robotics is a company specializing in the design and manufacture of unmanned vehicle solutions for industrial R&D. Brian Gerkey, Director of Open Source Development at Willow Garage who has worked on the open source Robot Operating System (ROS) since 2008. Dr. Gerkey will be CEO of the OSRF. Helen […]

May 19, 2012May 28, 2012 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

25 USD Hacker Friendly Electric Imp “WiFi-ises” Your Coffee Machine

Electric Imp is a device in an SD card form factor that aims at providing Wi-Fi connectivity to household appliances at low cost and bringing the Internet of Things (IoT) closer to reality. The Imp will also connect to a Cloud service handled by the company (which is also called Electric Imp). The device Wi-Fi connection can easily be configured using an iOS or Android smartphone thanks to BlinkUp, a patent-pending scheme supporting WEP, WPA and WPA2 encryption schemes as well as WPS setup. Electric Imp developers expect this device to save resources (e.g. electricity) by taking into account environmental conditions (e.g. occupancy, temperature..), improve security & safety and overall provide better monitoring and control of devices. For example, this could enable support services to remotely diagnose a device, and provide timely customer support. Here are the Electric Imp hardware specifications: ST Micro STM32 Cortex M3 MCU 802.11b/g/n WiFi 6 […]

April 24, 2012April 24, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Syntro 0.5.0 Cross-platform C++ Framework for Distributed Sensor Networks

Pansenti has announced the first release of Syntro (version 0.5.0), a cross-platform framework for creating distributed sensor networks. Syntro is an open source C++ library and a set of applications based on Qt 4.7. The source code is released under the GPL license. Syntro has been developed on the following platforms: Linux Fedora 16 Ubuntu >= 10.10 Mac OS 10.7 Windows 7 Syntro can run on x86 targets as well as ARM based Pandabord, Beagleboard and Beaglebone development boards (Ubuntu only). Syntro is based on the following “SyntroCore” applications: SyntroExec – Start up and management of Syntro apps. SyntroControl – Message switching and multicast distribution. SyntroStore – Multicast stream capture. SyntroCFS – Cloud file storage. SyntroReplay – Multicast stream generation. SyntroLog – Network-wide logging. Some demo applications using one or more webcams and the OpenCV library are also available: SyntroCamera – Capture a stream from a video device (such as […]

September 20, 2011September 20, 2011 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

First ARM-Based Arduino Board with Atmel SAM3U

Arduino announced Arduino Due board with a 32bit Cortex-M3 ARM processor on their blog before Maker Faire. The SAM3U processor from ATMEL runs at 96MHz with 256Kb of Flash, 50Kb of SRAM, 5 SPI buses, 2 I2C interfaces, 5 UARTS, 16 Analog Inputs at 12Bit resolution and more. Contrary to previous hardware release, they intend to open the process to the community early on and they plan to to be demo the board and give away some boards to a selected group of developers who will be invited to shape the platform while it’s been created. After Maker Faire, a small batch of Developer Edition boards on the Arduino store will be sold to members of the community who want to join the development effort. The final board will be released by the end of 2011. If you can’t wait there are some other Arduino-like projects with Cortex-M3 support based […]