Artila Matrix-516 ARM9 Industrial Linux Computer Features 8 RS-485 Ports

Artila Matrix-516 is a Linux-based industrial computer powered by Atmel AT91SAM9G20 CPU (ARM9) with 64MB SDRAM and 128MB NAND Flash inside, and several I/O interface including 8 isolated RS-485 serial ports. This device targets industrial applications, including intelligent transportation system (ITS), building automation, energy-saving system, and factory automation. Here are the specifications of this industrial Linux computer: CPU – ATMEL AT91SAM9G20 w/MMU @ 400MHz System Memory – 64MB SDRAM Storage – 128MB NAND Flash + 2MB DataFlash for system backup (recovery boot) + micro SD socket (Up to 32 GB) Network Interface – 2 x 10/100BaseT, RJ-45 connector with 1.5KV magnetic isolation TTY(Serial) Ports 8 x isolated RS-485 (2500Vrms isolation). Connector: terminal block Baud Rate: up to 921.6Kbps Parity: None, Even, Odd, Mark, Space Data Bits: 5, 6, 7, 8 Stop Bit: 1, 1.5, 2 USB Ports – 2x USB Host Ports, 1x client port (reserved).  Up to full-speed (12Mbps) […]

Artila M-506 and M-606 ARM9 Industrial Single Board Computers

Artila Electronics announced 2 new single board computers (SBC) based on Atmel SAM9G45 ARM9 Processor: Artila M-506 running Linux 2.6.38 Artila M-606 running Wince 6.0 Both models features the same hardware with a standard 3.5” form factor, Atmel AT91SAM9G45 Processor, 128MB DDR2 RAM, 128MB NAND Flash and 2MB DataFlash and only differ by the operating system and software used. The company explains that the board targets industrial application such as intelligent transportation system (ITS), building automation, energy-saving system, and scenario control systems. Here are the hardware specifications for both devices: CPU – ATMEL AT91SAM9G45 @ 400MHz Memory – 128MB SDRAM Flash – 128MB NAND & 2MB DataFlash for system recovery On-board TTL/LVDS LCD interface Supports 5V/12V TFT LCD panels, up to 1280 x 860 pixels Ethernet: 1x, 10/100Mbps COM port – 3x RS-232, 1x RS-422/485 USB Host – 4x USB 2.0 HS ports. Micro-SD Card – 16GB max. GPIO – […]

UP 7000 x86 SBC