bsp

Posted on by Jean-Luc Aufranc (CNXSoft) - 14 Comments on Freescale Introduces a Coin-sized Single Chip Module (SCM) Based on Freescale i.MX 6Dual

Freescale Introduces a Coin-sized Single Chip Module (SCM) Based on Freescale i.MX 6Dual

As the Freescale Technology Forum 2015 is taking place in Austin, Texas, the company will announce a few new products over the 4-day conference. After the official launch of Freescale i.MX 7 series processors, Freescale unveiled a new product based on their existing i.MX6 platform with “i.MX 6Dual SCM” (Single Chip Module) that integrate a dual core i.MX 6Dual processor with 1 or 2 GB LPDDR2 (PoP), a 16MB NOR flash and a PMIC in a tiny, coin-sized module. Key feature of SCM-i.MX6D module: Freescale i.MX 6Dual application processor with two ARM Cortex A9 core @ 800 MHz and Vivante GPUs (2D/3D) System Memory – 1 or 2 GB LPDDR2 (PoP configuration) Storage – 16 MB SPI NOR (Micron N25Q128A13) Power Supply – Freescale PMIC PF0100 Dimensions – 17mm x 14mm x 1.7mm There are also 109 discrete components on the module. BSPs for Linux and Android will be provided. […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Inforce 6410Plus Qualcomm Single Board Computer Adds GPS, MIPI CSI and DSI Interfaces

Inforce 6410Plus Qualcomm Single Board Computer Adds GPS, MIPI CSI and DSI Interfaces

[Update on June 16 with comments from Inforce Computing: The Inforce 6410Plus is a product/application ready SBC that can be mass-manufactured to be designed-in directly by OEMs into end-products. Of course developers, DIY enthusiasts, and research houses may use it as a development board, but essentially it’s a product ready SBC. CSI and DSI interfaces – A single 40-pin LSHM MIPI connector on the previous generation product has been replaced with a single 51-pin FI-R MIPI CSI connector. A single connector enables support for 2 cameras/up to 20MP. Similarly, we’ve replaced the LVDS interface with a single 51-pin MIPI-DSI connector that supports two simultaneous displays. ] Inforce IFC6410 board is one of the few low cost Qualcomm Snapdragon development boards / SBCs available on the market. Released in 2013, it features a Snapdragon 600 processor (APQ8064) coupled with 2GB RAM, 4GB eMMC, and various connectors. Inforce Computing has now introduced […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on AlphaScale ASM9260 ARM9 Processor Details and Development Board

AlphaScale ASM9260 ARM9 Processor Details and Development Board

Yesterday, as I wrote a Linux 4.0 Changelog, I noticed a new ARM processor called AlphaScale ASM9260, and I thought it might be interesting to find out more. A Google search would only return results from the Linux kernel mailing list and mirrors, so I checked out the code a bit to find out its an ARM9 processor made by AlphaScale Integrated Circuits Systems, Inc, based in Wuxi, China. The company website alphascale.com does not work, but I found out the processor is sold on Taobao for 38 RMB (~$6), and there’s also a development board (ASM9260DVK) for 498 RMB or about $80, and that’s basically the only two links were I could find any details. AlphaScale ASM9260T is arm ARM926EJS processor clocked at 240 MHz, 16GN I-cache and D-cache, 8KB SRAM, with the following peripherals: 32-bit SDRAM/NOR interface MLC NAND 24-bit ECC 2x USB 2.0 OTG, 2x USB 2.0 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Inforce 6501 Micro SOM is a Tiny Module with Qualcomm Snapdragon 805 Processor

Inforce 6501 Micro SOM is a Tiny Module with Qualcomm Snapdragon 805 Processor

Inforce Computing has now launched Inforce 6501 micro system-on-module (SoM) based on the same Qualcomm Snapdragon 805 processor found on their Inforce 6540 pico-ITX single board computer. The module measures just 50×28 mm, and integrates up to 3 GB RAM, up to 16 GB eMMC, and Bluetooth, Wi-Fi and GPS connectivity. Inforce 6501 specifications: SoC – Qualcomm Snapdragon 805 (APQ8084) quad core Krait 450 processor up to 2.7 GHz with Adreno 420 GPU, and Hexagon DSP V50 up to 800 MHz System Memory – 2GB to 3GB PoP LPDDR3 @ 800 MHz; 2×64-bit 26.5GB/s memory bus Storage – 4GB eMMC v4.5/v5.0, with options up to 16GB Connectivity – Bluetooth 4.1 & 2×2 dual band 802.11 b/g/n/ac Wi-Fi (QCA6174), and GPS (QCA1530) Peripherals and I/O via two 100-pin SoM connectors: Video / Display – 1x HDMI 1.4a, 2x MIPI-DSI (4-lane) & touch screen, Audio 4x Line out, 3x Mic-in, 1x headphone […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Emcraft Systems STM32F7 ARM Cortex M7 SoM and Development Kit Run uClinux

Emcraft Systems STM32F7 ARM Cortex M7 SoM and Development Kit Run uClinux

STMicro announced their STM32F7 MCU family the same as ARM announced their latest ARM Cortex M7 core for high-end micro-controllers last September. Emcraft Systems have now launched a STM32F7 system-on-module with 32MB SDRAM and 16MB NOR flash, and ported uClinux to the platform. The company has also launched a STM32F7 starter kit for evaluation and development. Both target industrial automation, system and power management, wireless networking / sensors and other embedded applications. STM32F7-SOM-1A Module STM32F7 system-on-module specifications: MCU – STMicro STM32F746 Cortex M7 MCU up to 200 MHz with 320KB RAM, 1MB flash in TFBGA-216 package System Memory – 32MB SDRAM Storage – 16MB NOR flash Connectivity – 802.3 Ethernet PHY SoM connectors – 2x 80-pin (0.4mm pitch) Debugging – ARM SWJ-DP combined JTAG and serial wire debug port Misc – Watchdog, RTC, USB and other I/Os via SoM connectors Power – 3.3V DC; Low-power mode with short startup times; […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on Mixtile LOFT-Q Allwinner A31 Board with SATA Can Now be Purchased for $90

Mixtile LOFT-Q Allwinner A31 Board with SATA Can Now be Purchased for $90

Mixtile LOFT-Q and LOFT Kit were unveiled nearly a year ago, the first being a development board based on Allwinner A31 processor with 2GB RAM, 16GB RAM,  SATA connector, Gigabit Ethernet, etc.., while the second is a kit with an enclosure and power supply. The kit does not appear to be available yet, but the board has recently been listed on SeeedStudio for $90. Mixtile LOFT-Q specifications: SoC – Allwinner A31 quad core ARM Cortex-A7 processor with PowerVR SGX544 MP2 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC, SATA III connector for 2.5″ drives, and SD card Slot Video Output – HDMI 1.4 up to 1080p60 Video Decoding – H.264 4Kx2K video decoding, multi-format FHD video decoding, including Mpeg1/2, Mpeg4 SP/ASP GMC, H.263, H.264,etc Audio I/O – HDMI, 1 S/PDIF, high definition microphone Camera I/F Integrated Parallel & MIPI I/F sensor Integrated powerful ISP, supporting Raw Data CMOS […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Gateworks GW5520 Single Board Computer Features Dual Gigabit Ethernet Ports, Two mini PCIe Slots

Gateworks GW5520 Single Board Computer Features Dual Gigabit Ethernet Ports, Two mini PCIe Slots

If you need industrial grade ARM Linux boards with lots of Ethernet ports and several mini PCIe slots, you may want to check out Gateworks Ventana boards. The company has now released a smaller member of Ventana family with GW5520 SBC powered by Freescale i.MX6 dual, with two Gigabit Ethernet port, two mini PCIe slots, and support for PoE. Gateworks Ventana GW5520 SBC specifications: SoC- Freescale i.MX6 Dual Cortex A9 processor @ 800MHz with Vivante Vivante GC2000 / GC355 / GC320 GPUs. Option: i.MX6 Quad System Memory – 512 MB DDR3-800 SDRAM (Up to 2GB RAM as option) Storage – 256 MB Flash (Up to 2GB as option), serial configuration EEPROM Video and Audio Output – HDMI 1.4 Connectivity – 2x Gigabit Ethernet ports. USB – 2x USB 2.0 host ports Expansion 2x Mini-PCIe sockets Optional mini-PCIe socket to supports a mSATA disk drive (i.MX6 Quad only)  I/Os Serial – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Free Electrons Publishes Yocto & OpenEmbedded Training Materials

Free Electrons Publishes Yocto & OpenEmbedded Training Materials

Free Electrons is a small (9 people) engineering company focusing on embedded Linux / Android, and open source software, which also happens to have ported several ARM SoC to the mainline kernel. From time to time, they also offer training sessions, and release course materials publicly. Their latest training is a 3-day course dealing with the Yocto Project and OpenEmbedded, using BeagbleBone Black development board for lab sessions, and all materials have been released under a Creative Commons license. The training consists in: Understanding the Yocto Project Using it to build a root filesystem and run it on your target Writing and extending recipes Creating layers Integrating your board in a BSP Creating custom images Application development with an Eclipse SDK Three files are released: yocto-slides.pdf – Yocto Project and OpenEmbedded Training presentation slides (245 pages) give an overview of various build systems, before getting more details about the Yocto […]

Exit mobile version