development board News - Page 217 of 260 - CNX Software

March 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Radxa Rock 2 Square is a Rockchip RK3288 Development Board for Hobbyists

When Radxa Rock 2 was first unveiled, it became clear it was not aimed at the hobbyist market, as it includes lot of features such as SATA, 3G modem, dual Gigabit Ethernet, up to 4GB memory and so on, and is likely to cost a few hundred dollars. The company is now working a cheaper baseboard called Radxa Rock 2 Square leveraging the same Radxa Rock 2 SoM used with the full-featured baseboard (now also called Radxa Rock 2 Full), but with less features and at price point that should be more affordable to individuals. Preliminary Rock 2 square specifications (derived from picture above): Processor/Memory/Storage – Via Rock2 SoM including Rockchip RK3288 quad core Cortex A17 processor, 2 to 4 GB RAM, and 16GB eMMC. External Storage – SATA and micro SD slot Video Output – HDMI, LVDS connector Audio I/O – HDMI, headphone jack, built-in microphone, and optical S/PDIF […]

March 25, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Cubieboard4 Benchmarks in Android

Last time I tried running benchmarks in an Allwinner A80 board (A80 OptimusBoard), it either rebooted during the benchmark, or had fairly disappointing results for example for USB storage. I documented my findings in a post entitled “Current Performance and Stability Issues on AllWinner A80 OptimusBoard Development Board” which was written in October 2014. But a few months have passed, and since Cubieboard4 is another hardware platform, so I was interested in running benchmarks including storage and networking performance testing on the new board to see if any progress was made. Cubieboard4 Android Benchmarks – Antutu, Vellamo, and 3DMarks Manufacturers can add the key ro.sys.hiritsu to build.prop in order to artificially inflate their Antutu scores with Allwinner A80 processor. So before running Antutu, I checked /system/build.prop in the firmware, and found out no trace of this variable, which can only be good for CubieTech reputation. CC-A80 board, the other name […]

March 25, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments Introduces MSP432 ARM Cortex-M4F MCU Family

Texas Instruments has just launched a successor for its 16-bit MSP430 MCU family with MSP432 MCU series featuring a 32-bit ARM Cortex-M4F core, a DSP, up to 256 KB flash, up to 64 KB SRAM, and according to the company ” delivering a ULPBench score of 167.4 outperforming all other Cortex-M3 and -M4F MCUs on the market”. The new MCU family targets consumer & portable electronics, building & factory automation & control, smart grid & energy, healthcare & fitness, and wearables applications. Key features listed for MSP432P4xx: MCU – 32-bit ARM Cortex-M4F up to 48 MHz with FPU and DSP. Delivers 3.4 Coremark/MHz Memory – Up to 64 KB RAM; Selectable RAM retention Storage – Up to 256 KB Flash; dual bank for simultaneous reading and writing Security – 256-bit AES encryption, JTAG access lock, 4 IP Protection regions EnergyTrace Technology Real-time power measurement and debugging Generate application energy profiles including […]

March 23, 2015March 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Firefly introduces FireBLE Bluetooth Low Energy Board

So just as today I wrote about XBAND BLE Sensor board, the makers of Firefly-RK3288 also announced their own Bluetooth Low Energy board aptly named FireBLE, and also integrating a 6-axis gyroscope and accelerometer, but instead of being based on Nordic or Cypress, the company went with an NXP BLE chip. FireBLE board specifications: SoC – NXP QN9021 ARM Cortex M0 MCU @ 32MHz with 94KB ROM (protocol stack), 64 KB SRAM, 128KB flash Bluetooth – BT 4.0 single mode. Central and peripheral mode with up to 8 simultaneous connections. Sensors MPU-6050 3-axis gyroscope and 3-axis accelerometer with an on-board Digital Motion Processor (DMP) capable of processing 9-axis motion fusion algorithms. Battery and temperature sensor USB – micro USB port for power and programming Expansion – 3 expansion headers with access to SPI, UART, I2C, GPIO, and PWM, as well as OLED display interface. Debugging – JTAG, support SWD online […]

March 21, 2015March 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Orange Pi 2 Allwinner H3 Quad Core Development Board Sells for $35

After Orange Pi Plus development board powered by Allwinner H3 quad core cortex A7 processor, the company has decided to launch a lower cost version of their Allwinner H3 board with Orange Pi 2, that has started selling for a compelling $35 + about $4 shipping worldwide, and provides another sub-$50 alternative to Raspberry Pi 2, ODROID-C1, and Radxa Rock Lite boards. Orange Pi 2 board specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.6 GHz with 256KB L1 cache, 1MB L2 cache, and an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – micro SD card slot (up to 64GB) Video Output – HDMI, AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek module) USB – 4x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin […]

March 20, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cloudsto Embed+ RK3288 is a Rockchip RK3288 Board for Digital Signage and Point-of-Sale Applications

As Rikomagic launched their MK80LE (Linux Edition) mini PCs on Cloudsto a few days ago, I also noticed a new page entitled embed+ RK3288, which described what should be the first board sold by Rikomagic/Cloudsto. The Rockchip RK3288 based board can be used as an Android & Linux development board, but it appears to mainly target OEMs for applications such as digital signage, point-if-sale, and web kiosks. Rikomagic embed+ RK3288 specs: SoC – Rockchip 3288 quad core ARM Cortex A17 up to 1.8 GHz with Mali-T764 GPU supporting OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory – 2G DDR3 Storage – 8 to 32 GB eMMC flash. The daughterboard adds an SD card slot. Video / Display interfaces – HDMI 2.0, LCD interfaces (backlit, power, data) Audio Output – HDMI, 3.5mm earphone / audio output jack, and built-in microphone. Connectivity – 802.11 b/g/n Wi-Fi , and Bluetooth 4.0 (external). Gigabit LAN via a daughterboard. USB […]

March 18, 2015March 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Giveaway Week Winners Announced (March 2015)

The latest Giveaway week has come to an end, and I’m just coming back from the post office, having sent a few Android based TV boxes, a Linux development board, and one wireless audio streamer to the lucky winners. I’ve already announced winners daily in the comment section of each contest, but here’s the list again with the device, winners’ nickname and their country of residence: Nagrace HPH NT-V6 – Rizwan, Canada Vidon Box – bazsi, Romania RipplTV – driv3l, USA Freescale SABRE Lite – biasio95, Italy Vidon.me AV200 – cityF, Portugal HD18T – Sean, Canada SoundMate WM201 – Orel, France So people from Canada got lucky, but still no winner from Asia or Oceania. The parcel have been send via registered Small Packet Airmail, all the winners should receive them in a few weeks, and certainly I hope they’ll have fun enjoy with their devices. If you haven’t won […]

March 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

TechNexion Introduces Intel Edison Compatible PICO-iMX6 SoM and DWARF Board

Intel Edison is a board made for wearables featuring an SoC with Intel Atom and Quark CPU cores. TechNexion, an embedded systems company based in Taiwan, has decided to make a mechanically and electrically compatible system-on-module featuring Frescale i.MX6 Solo or Duallite ARM Cortex A9 processor called PICO-iMX6. The company is also providing a PICO-DWARF baseboard that’s both compatible with PICO-iMX6 SoM and Edison board. DWARF stands for “Drones, Wearables, Appliances, Robotics and Fun”, so that pretty much explains what the platform is for. PICO-iMX6 System-on-Module Two version of the modules are available: PICO-iMX6-SD and PICO-iMX6-EMMC, the former with a micro SD slot for storage, and the latter a 4GB eMMC. Both share the followings specifications: SoC – Freescale i.MX6 Solo / Duallite single/dual core ARM Cortex A9 @ 1Ghz with Vivante GC880 3D GPU and Vivante GC320 2D GPU (Composition) System Memory – 512MB or 1GB DDR3 Storage – […]