development board News - Page 260 of 261 - CNX Software

December 2, 2011August 10, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

New Development Board: Pandaboard ES with TI OMAP4460

Somehow I’ve missed the announcement of the Pandaboard ES – a new version of the Pandaboard low cost development board – last month. The Pandaboard ES is built around OMAP4460 processor running at 1.2 GHz with 1GB RAM and an SD/MMC card slot. It features onboard 10/100MBit Ethernet, Wifi, Bluetooth, several video output ports (HDMI, DVI-D, LCD Expansion and DSI), audio input/audio, several expansion ports (USB 2.0 OTG, USB 2.0 host, GPIO header, camera header..) and debug ports (JTAG, UART, 2 status LEDs, 1 GPIO button and sysboot switch). It has the same form factor as the original Pandaboard (114.3mm x 101.6mm) and weights 81.5g instead of 74g for the Pandaboard. The cost is however slightly higher at 182 USD (recommended price) vs. 174 USD for the Pandaboard. To help you choose which board is best for you, I’ve created a table comparing Pandaboard and Pandaboard ES specifications and features. […]

November 25, 2011November 25, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

400 Free Raspberry Pi (Development) Boards for Qt 5 Developers

Remember the 25 – 35 USD ARM11 board Raspberry Pi ? Nokia is now getting involved and plans to speed up Qt 5 development on this nice little hardware. The Raspberry Pi Foundation has announced that Nokia would purchase 400 boards next month and give them away to Qt 5 developers who are willing to port software, develop apps, and test and improve the Qt 5 Linux stack. Mostly likely it will be the “high-end” 35 USD version with Ethernet support and 2556 MB RAM as show below. Beside its ridiculously cheap price, the board key features include Linux support, embedded GPU and OpenGL ES libraries that makes it a usable multimedia device capable of outputting 1080p. Nokia and ICS engineers have already started to port Qt to the Raspberry Pi board using the alpha boards. You can see the Qt Quick 2 emitter demo below running on one of the […]

November 18, 2011February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Qualcomm Announces Snapdragon S4 Liquid Mobile Development Platform Tablet

Following their new Snapdragon S4 processors announcement, Qualcomm also unveiled the Snapdragon S4 Liquid MDP Tablet for developers based on MSM8960 with 2GB LPDDR2 system memory, 32 GB eMMC and 1 MB NOR Flash. This reference design features a 10.1-inch 1366 x 768 (16:9) 10-finger capacitive multitouch display, on-die LTE modem, dual 1080p cameras (front:13 MP / rear: 2MP) and another two for 3D, 7 (!) microphones, surround stereo speakers and lots of sensors: dual 3D accelerators, 3-axis gyro, a compass, ambient light and proximity sensor, temperature and pressure sensor and a fingerprint sensor. It also supports haptic feedback thanks to two dual independently-controlled linear vibrator motors. Although Android Honeycomb and ICS can do without, the S4 MDP comes with its fair share of (physical) button: combo volume / zoom rocker, power button, screen rotation lock, home button and reset button. External connectors include a docking station port, micro USB […]

November 8, 2011November 8, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

WIMM One Developer Preview Kit is Now Available

WIMM Labs has just announced the availability of its wearable Android-based reference platform and software development kit. It can be purchased for 299 US dollar and is only available in the US. It is currently only available to registered developers but will be available to all by the 9th of November. The WIMM One Developer Preview Kit includes: WIMM One Module Black wrist strap Charging kit: Paddle charger, USB cable, USB power adapter Here’s the email registered developers received: We are thrilled that you expressed early interest in the WIMM One Developer Preview and we’d like to invite you to be among the first to purchase a WIMM One during our limited release. From now until November 9, the store will only be open to those who’ve reserved in advance. Just register at dev.wimm.com using this email address and purchase your WIMM One Preview for $299. Inventory is limited and […]

November 1, 2011November 1, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

TI Unveils Sitara AM335x ARM Series Cortex-A8 Processors

Texas Instruments has just announced the new Sitara AM335X Processors and the low cost Beaglebone development board. The low cost Cortex-A8 SoCs start at 5 US dollars per piece and are aimed at upgrading ARM9 solutions (software compatible) and adding new features such as 3D interfaces and touch screen, high resolution displays with faster performance. Texas Instruments says you could take those new upgraded products to market within 6 months thanks to their inexpensive development board (Beaglebone) and complete SDK. There are six models in the Sitara AM335X series: AM3552: Cortex A8 up to 720 MHz. AM3554: Cortex A8 up to 720 MHz with 3D Graphics (PowerVR SGX GPU). AM3556: Cortex A8 up to 720 MHz with programmable real-time unit (PRU) @ 200 Mhz. AM3557: Cortex A8 up to 720 MHz with PRU @ 200Mhz and EtherCat. AM3558: Cortex A8 up to 720 MHz with 3D Graphics and PRU @ […]

October 31, 2011November 1, 2011 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

BeagleBone: New 89 USD Beagleboard

The BeagleBone is a low-cost, high-expansion hardware-hacker focused BeagleBoard. It is a bare-bones BeagleBoard that acts as a USB or Ethernet connected expansion companion for your current BeagleBoard and BeagleBoard-xM or works stand-alone. The BeagleBone is smaller than the previous version of BeagleBoards (looks like the business of a credit card) and features TI Sitara™ AM3358 Cortex A8 processor clocked at 700Mhz. The BeagleBone is also able to run a full-featured Linux. Here are the current hardware specifications: TI AM3358 ARM Cortex-A8 @ 700 MHz 256 MB DDR2 RAM Board size: 3.4″ x 2.1″ Shipped with 2GB microSD card with the Angstrom Distribution with node.js and Cloud9 IDE Single cable development environment with built-in FTDI-based serial/JTAG and on-board hub to give the same cable simultaneous access to a USB device port on the target processor Industry standard 3.3V I/Os on the expansion headers with easy-to-use 0.1″ spacing On-chip Ethernet, not […]

October 28, 2011October 30, 2011 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ST Micro 15 USD STM32F4-Discovery Cortex-M Development Kit

ST Microelectonics promote their Cortex-M series at ARM Techcon 2011 and especially the new STM32F4 series the most powerful cortex M4 MCUs. They also showcase a low cost development board called STM32F4-Discovery that they give away at the exhibition and that can be bought online for 14.90USD from distributors. The evaluation board is based on the STM32F407VGT6 and includes an ST-LINK/V2 embedded debug tool, two ST MEMS, digital accelerometer and digital microphone, one audio DAC with integrated class D speaker driver, LEDs and push buttons and an USB OTG micro-AB connector. A large number of free ready-to-run application firmware examples are available in the STM32F4-Discovery board firmware package to support quick evaluation and development. Key Features of the Development kit: STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 […]

October 14, 2011October 14, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Variscite System On Module based on TI OMAP4460

Variscite – an Israeli company specialized in embedded systems manufacturing, development and consulting – announced the VAR-SOM-OM44 system on module (SOM) based on TI OMAP4460 processor (dual core Cortex-A9 cores @ 1.2 ~ 1.5GHz). This SOM features 512MB of DDR2 SDRAM and a microSD socket, I/O including gigabit Ethernet, USB 2.0, 3D camera, and HDMI. Variscite also announced the VAR-OM44CustomBoard, a development board that can be customized to match specific customers requirement as well as the VAR-DVK-OM44, a complete development kit with touchscreen for evaluation and application development purposes. Here are the VAR-SOM-OM44 SOM specifications: CPU: Texas Instruments OMAP4460 Processor (1.2GHz – 1.5GHz) dual-core ARM Cortex-A9 MPCore GPU: PowerVR™ SGX540 graphics core @384MHz Memory: 512-1024MB 400MHz LPDDR2 Built-In micro-SD Socket Display: LCD interface – Supporting 24bpp resolutions up to WXGA HDMI interface – Supporting 1080p 4-wire touch screen panel interface Audio: Line-in Stereo Headphone out Digital microphone S/PDIF Out Network: 10/100/1000Mbps […]